AGI Roll Cages in Ingleburn, New South Wales, Australia | Engineering service

AGI Roll Cages

Locality: Ingleburn, New South Wales, Australia

Phone: +61 2 9605 4411

Address: Unit 24, 19 Aero Rd 2565 Ingleburn, NSW, Australia

Website: http://www.agi-precision.com.au/

Likes: 9070

Add/Update information

Reviews

Tags

• Engineering service
• Motor vehicle company
• Vehicle customisation shop

24.01.2022 Hyundai Excel "Ultimate" 6 Point National Level Bolt-In Roll Cage This particular "Ultimate" spec National level Excel Cage is packed with features such as: through dash bar, firewall support bars, front legs, windscreen pillar bars, double roof bars, windscreen horizontal bar, double "unbroken" door bars with gusseting, gusseted double diagonals and harness bar through the main hoop (to suit HANS device), double diagonals and harness bar through the lower end of the back sta...ys, gusseting and billet connectors at the windscreen pillar bar, B pillar brackets and door bar junctions and 4 eye bolts to suit clip on racing harnesses. As always, all our kits are Motorsport Australia compliant and come complete with all backing plates and high tensile bolts needed for the install, along with an instruction manual. #hyundaiexcel

23.01.2022 Mercedes A45 AMG Bolt-In 4-Point Half Cage The beating heart of a 2020 A45 AMG is the 2.0-litre M 139 engine, which pumps out a monumental 309kW (421hp). Each engine is hand built at AMG's Affalterbach plant. This A45 AMG Half Cage has gusseted double diagonal bracing through the main hoop as well as through the back stays as well as four eyelets through the integrated rear harness bar.... #mercedesamg #a45amg

22.01.2022 Hyundai Excel State Level Bolt-In 6 Point Roll Cage Featuring double door bars with gusseting, front legs, windscreen top cross bar, harness bar to suit HANS device and gusseted double diagonals through the main hoop as well as integrated harness bar through the lower end of the back stays with eye bolts to suit clip on racing harnesses for driver and passenger. This particular Cage was also ordered with a single roof diagonal.... #Hyundai #hyundaiexcel

22.01.2022 Ford Falcon 3rd Gen (XD-XE-XF) 6 Point Bolt-In State Level Roll Cage Single door bars per side, front legs, windscreen horizontal bar, gusseted double diagonals and harness bar (to suit HANS) through the main hoop and harness bar with 4 eye bolts for clip on racing harnesses in the back stays all make up this State level Roll Cage. In 1982 XE Falcon was also offered in a limited European Sports Pack version.... The ESP was built on the Fairmont Ghia platform so on top of power steering and air conditioning, it also packed things like four-wheel-disc brakes, Bilstein shocks and lowered springs, all sitting on top of Uniroyal tires, wrapped around 15-inch `snowflake’ wheels. #fordfalcon

21.01.2022 Nissan 180SX Bolt-In 6 Point Club spec Roll Cage Club spec 6 point Roll Cage comes with a single diagonal brace through the main hoop, front legs, windscreen top cross bar and back stays with an integrated harness bar through the lower end. This Cage has also been optioned with eye bolts to suit clip racing harnesses for driver and passenger. #180sx #nissan180sx

21.01.2022 Holden Commodore 3rd Gen Club spec 6 Point Single diagonal through the main hoop, front legs, windscreen top cross bar and harness bar with 2 eye bolts through the lower end of the back stays. Photo credit: Sicnag on Visualhunt / CC BY... #commodore

21.01.2022 Toyota MR2 Spyder Hard Top 6 Point State Level Roll Cage MR2 Spyder Hard Top Cage features front legs, windscreen top cross bar, single door bars, main hoop, gusseted double diagonals and harness bar through the lower end of the back stays with 4 eye bolts for passenger and driver to suit clip on racing harnesses. Ideal if you're looking to take your Hard Top MR2 to the track.... #mr2

21.01.2022 Holden Commodore Gen 3 National Level 6-Point Bolt-In Roll Cage The VT Commodore shared some similar styling with the Opel Omega B, but only the black plastic on the B-pillar and grab handles were interchangeable between the two cars. Our National Level Cage has windscreen pillar bars, double roof bars, front legs, windscreen top cross bar, gusseted double door bars, horizontal harness bar through the main hoop with gusseted double diagonal bracing, an integrated rear harness... bar with four eyelets, and double diagonals through the back stays. Photo credit: Sicnag on Visualhunt #holdencommodore #commodore

19.01.2022 Mazda RX-7 FB (SA22C) 4 Point Half Cage This Motorsport Australia compliant Half Cage for the RX-7 FB is equipped with a single diagonal brace through the main hoop as well as an optional diagonal brace and harness bar in the back stays. #rx7fb

19.01.2022 Audi TT-RS (3rd Gen) Bolt-In Roll 4 point Roll Bar This Roll Bar for the TT-RS is going to a client in the U.S! It features a main hoop with bent back harness bar (to still allow seat functionality), gusseted double diagonals with, billet connectors at the main hoop/ rear stay junctions and 4 eye bolts.... In a 2019 it was announced that the TT will be discontinued at the end of this model's lifecycle to clear a path for crossovers and electric models. Since that announcement, Audi has decided to keep the TT around for 2021. #auditt

19.01.2022 LUDDENHAM RACEWAY - NEW LAP RECORD - 17.09.2020 AGI Sport and driver Nathan Gotch were invited out to Luddenham Raceway in September 2020 to have a crack at the... existing outright lap record. Check out how they got on as AGI’s Sabin Tudosa captures all the action from eight different cameras located on the car and in the air while producing a great video of the action. Special thanks to Simo and the crew at Luddenham Raceway for making their fantastic venue available for the morning. See more

18.01.2022 Subaru WRX GC8 State Level Bolt-In 6-Point Roll Cage This Cage is fitted with single door bars per side, gusseted double diagonal bracing and harness bar through the main hoop, front legs, windscreen top cross bar and an integrated harness bar with four eyelets through the lower end of the back stays. Photo credit: BrunoAmaru on VisualHunt... #wrx #subaruwrx See more

18.01.2022 Two Hyundai Excel State Level Bolt-In Roll Cages Going to Queensland! These Excel Roll Cages each have single door bars per side, front legs, windscreen top cross bars, a single diagonal brace with harness bar behind the driver (with two eyelets through the main hoop), and back stays with an additional integrated harness bar through the lower end of the back stays. #hyundaiexcel #hyundai

17.01.2022 Mazda RX-7 FD 6 Point State Level Bolt-In Roll Cage This 6 Point Roll Cage for the RX-7 FD is going to a customer in Canada! It features gusseted double diagonals and harness bar through the main hoop, front legs, windscreen horizontal bar and 4 eye bolts in the harness bar mounted in the lower end of the back stays.... #rx7

16.01.2022 BMW 135i State Level 6 Point Bolt-In Roll Cage Motorsport Australia compliant Bolt-In Roll Cage for the 135i features windscreen horizontal bar, front legs, single door bars per side, gusseted double diagonals and harness bar through the main hoop and back stays with harness bar and 4 eye bolts. The longitudinally-mounted engine and rear-wheel drive layout helped to give the 135i 50/50 weight distribution.... #135i

16.01.2022 Subaru WRX GC8 Bolt-In 4 Point Half Cage Main hoop with single diagonal and gusseted double diagonals as well as integrated harness bar through the back stays with eye bolts for driver only. Photo credit: FotoSleuth on Visual Hunt / CC BY... #subaruwrx #Subaru

15.01.2022 BMW E36 2 Door 4 Point Half Cage Single diagonal through the main hoop and harness bar through the lower end of the back stays that will suit wrap around racing harnesses. This 4 point is ideal for added safety at track days or sprints.... #e36m3

15.01.2022 Ford Falcon BA/BF Bolt-In 4-Point Half Cage After the AU's poor public outing, Ford spent a little over $500 million to bring the BA Falcon to life. The Falcon line received a complete redesign with a newly designed rear suspension, an complete overhaul of the inline 6-cylinder engine, two new V8 engines, and a brand new transmission. The pictured Half Cage is fitted with gusseted double diagonal bracing through the main hoop and back stays as well as an integrated harness ba...r with eyelets on the driver's side to suit a clip on racing harness. Photo credit: Sicnag on VisualHunt #fordfalcon #fordaustralia

15.01.2022 Nissan Silvia S13 Bolt-In 4 Point Half Cage. Perfect for events such as sprints or track days, this Half Cage is optioned with gusseted double diagonal bracing through the main hoop as well as a single removable diagonal brace and harness bar with four eye bolts through the back stays. #nissansilvia #s13

15.01.2022 Ford Falcon AU 6 Point Bolt-In National Level Roll Cage. Single door bar version or our National level Roll Cage for the AU Falcon with gusseting at the windscreen pillar bar/door bar junctions, front legs, windscreen top cross bar, main hoop with harness bar and gusseted double diagonals, roof bars in "V" configuration and back stays with double diagonals and integrated harness bar with eye bolts for clip on style racing harnesses on driver and passenger's side. All kits com...e included with backing plates and high tensile bolts as well as an install guide necessary for fitment. #fordfalcon #AUFalcon Photo credit: Sicnag on Visual hunt / CC BY

14.01.2022 Nissan 180SX Bolt-In 6 Point State Level Roll Cage Gusseted double door bars, front legs, windscreen top cross bar, gusseted double diagonals and harness bar through main hoop (suitable for HANS device) and integrated harness bar through the lower end of the back stays with eye bolts for driver and passenger. #180sx #nissan180sx

13.01.2022 Porsche Cayman 718S GT4 - Japan Thanks to Sho from Team TOA in Japan for sending us in these progress pics of their new Cayman track car build now fitted with a custom AGI Bolt-in 6pt Roll Cage. Looking good guys!

11.01.2022 Ford Falcon BA 6 Point State Level Bolt-In Roll Cage. Double door bars with gussets, Front legs, windscreen horizontal bar, main hoop with gusseted double diagonals and harness bar and back stays with additional harness bar and 4 eye bolts to suit clip on racing harnesses. #falcon

10.01.2022 Nissan Pulsar N15 State Level 6 Point Bolt-In Roll Cage This N15 Pulsar Cage is made op of gusseted double door bars, front legs, gusseted double diagonals and harness bar (to suit HANS device) through the main hoop as well as integrated harness bar through the lower end of the back stays with eye bolts for driver and passenger to suit clip on racing harnesses. Photo credit: FotoSleuth on VisualHunt.com / CC BY... #nissanpulsar #nissan

09.01.2022 Nissan Skyline R32 4 Point Half Cage Gusseted double diagonals through main hoop as well as back stays with 4 eye bolts through the harness bar for driver and passenger clip on racing harnesses. #skyliner32

09.01.2022 Holden Torana A9X/LX Hatch 6 Point Bolt-In National Level Roll Cage Main hoop with gusseteddouble diagonal bracing, back stays, lateral bars (front legs), windscreen top cross bar, harness bars through hoop (suit wrap around harness), harness bar through low end of back stays with 4 x eye bolts (suit clip on harness), double door bars, roof reinforcement bars, windscreen pillar support bars, double diagonals through backstays. This high level spec Cage is ideal for events su...ch as: National Level Race meetings, Gravel Rallies, Tarmac Rally events such as Targa Tasmania, racing at Bathurst (for cars log booked after 2012), Drifting or ANDRA spec Drag racing (down to 8.0 sec). #torana #holden

09.01.2022 Toyota Corolla KE70 6 Point Club spec Roll Cage Front legs, windscreen horizontal bar, main hoop with single diagonal, back stays with harness bar in the lower end and 4 eye bolts. Photo credit: FotoSleuth on Visualhunt / CC BY... #ke70

09.01.2022 Subaru WRX GD Bolt-In 4 Point Half Cage This Bolt-In Half Cage is spec'd with gusseted double diagonal bracing through the main hoop and backstays as well as a harness bar through the lower end of the back stays. #wrx #wrxsti

08.01.2022 Mazda RX-8 National Level 6-Point Bolt-In Roll Cage The RX-8 has a near even 50:50 weight distribution. The chassis was also designed to resist torsional deformation, making it more rigid so as to improve handling. Mazda achieved this by mounting the engine behind the front axle and by placing the fuel tank ahead of the rear axle. This National level Roll Cage has double roof bars, gusseted double door bars, front legs with windscreen pillar bars, gusseted double diagonal bra...cing and harness bar through the main hoop and back stays with an integrated harness bar, main hoop to back stay support bars and double diagonals through the rear. #rx8 #mazdarx8

08.01.2022 ***Nissan Skyline R32 Full 6 Point Roll Cage Going To Hawaii*** With Double door bars, front legs, windscreen horizontal bar, main hoop with harness bar and gusseted double diagonals as well as harness bar through the lower end of the back stays and 4 eye bolts There's even a possibility you may see this Cage at Wekfest USA Hawaii in the future.... #R32

07.01.2022 BMW E36 Four Door Half Cage Double diagonals through the main hoop with gussets and harness bar through the lower end of the back stays. If you're taking a passenger with you to any events, having a second diagonal through the main hoop is highly recommended in case of an accident. All our Cages that have double diagonals also have gusseting added to meet Motorsport Australia requirements.... #bmwE36

07.01.2022 Toyota MR2 Spyder Soft Top 4 Point Bolt-In Half Cage This Soft Top version of our MR2 Spyder Half Cage is comprised of a main hoop with bent back harness bar (through the main hoop), eye bolts on driver's side and rear stays with gusseted double diagonals. #ToyotaMR2 #mr2

07.01.2022 Toyota Corolla KE70 4 Point Bolt-In Half Cage Single diagonal through the main hoop with back stays and integrated harness bar with 2 eye bolts on the driver's side. Ideal for track days or sprints. Photo credit: FotoSleuth on VisualHunt / CC BY... #ke70

06.01.2022 Subaru WRX VA 4-Point Bolt-In Half Cage Subaru officially launched Subaru Tecnica International (STi) on April 2, 1988. Since then STi has earned three World Rally Championships, four class wins at the Nürburgring, and given us some really fun road cars. The pictured Half Cage has a single diagonal brace through the main hoop and an integrated harness bar through the lower end of the back stays with eyelets on the driver's side.... #subaruwrx #subaruwrxsti

06.01.2022 Toyota Supra Mk4 Bolt-In 4-Point Half Cage One of the biggest reasons the A80 Supra became such a legendary car was the straight-six 2JZ-GTE straight-six engine. It could easily make enormous amounts of power even without touching the internals. This Half Cage for the A80 Supra has a single diagonal brace through the main hoop, a single diagonal through the rear stays, and an integrated harness bar through the lower end of the back stays.... #supramk4 #toyotasupra

06.01.2022 Subaru WRX GR Hatch State Level 6 Point Roll Cage State level 6 Point for the WRX GR Hatch with gusseted double diagonals and harness bar through the main hoop, double door bars, front legs, windscreen horizontal bar and 4 eye bolts in the harness bar through the lower end of the back stays. With the WRX STi GR, Subaru also introduced its Driver Controlled Centre Differential. It allows the driver to switch between three different centre diff modes for managing torque and gri...p. With this system, the driver can send more power to the rear or front wheels depending on road conditions. #wrx

06.01.2022 Toyota Supra Mk4 Bolt-In 4 Point Roll Bar Single diagonal brace and bent back harness bar through the main hoop as well as a single diagonal brace and harness bar with four eye bolts through the back stays. #supra #supramk4

06.01.2022 Toyota Corolla KE70 Thanks to Mark from SA for sending us in these pics of his KE70 with newly fitted up AGI National level Bolt-in Roll cage kit with double door bars per side. Looks great!

06.01.2022 Mini Classic State Level 6 Point Bolt-In Roll Cage Windscreen top cross bar, front legs, single door bars, gusseted double diagonals with harness bar through the main hoop and integrated harness bar through the lower end of the back stays with eye bolts to suit clip on racing harnesses for driver and passenger. #minicooper #MINIClassic

05.01.2022 Toyota GT 86 Bolt-In 4 Point Roll Bar This BRZ Roll Bar is going to Colorado USA! It features double diagonal bracing with gussets around the center as well as an integrated harness bar through the lower end of the back stays and four eye bolts to suit clip on style racing harnesses for driver and passenger.... #subarubrz #brz

05.01.2022 Honda Civic EG (5th Gen) 6 Point State Level Bolt-In Roll Cage This Civic EG Cage features front legs, windscreen horizontal bars, single door bars per side, main hoop with gusseted double diagonals and harness bar and harness bar with 4 eye bolts through the lower end of the back stays. The EG Civic was made using lightweight materials to increase fuel efficiency and make the car more economical. It also had a different suspension setup compared to the previous model which t...ook away some of the responsiveness the previous model had, but made the car more comfortable for every day use. #hondacivic

05.01.2022 Toyota GT-86 build Great pics from the guys at Yakuza Motorsports in Sydney building up a GT-86 with AGI 4pt Half Cage and custom paint job along with a bunch of Yakuza accessories. Looking great guys!

04.01.2022 Toyota MR2 Spyder Hard Top 4 Point Roll Bar This Roll Bar for the MR2 Spyder is on its way to Canada It features a main hoop with 4 eye bolts in the bent back harness bar and gusseted double diagonals through the back stays with billet connectors at the main hoop/ back stay joints.... #mr2spyder

04.01.2022 Hyundai Excel State Level 6-Point Bolt-In Roll Cage This double door bar version of our State level Roll Cage also has a single diagonal brace and harness bar on driver's side (through the main hoop), as well as front legs, windscreen top cross bar and an integrated rear harness bar through the lower end of the back stays. #hyundaiexcel #hyundai

04.01.2022 Dodge Challenger 6-Point Bolt-In Roll Bar with Swing Out Door Bars Headed To U.S.A! The Challenger Super Stock makes 601 kW (807hp), and 707 pound-feet of torque from the 6.2-liter, V-8 supercharged HEMI. Helping to translate all that power to the ground is a TorqueFlite auto gearbox. This U.S bound Roll Bar is made up of a main hoop with a bent back harness bar, swing out door bars and back stays. All fittings are included with each kit as well.... #dodgechallenger #challengerhellcat

03.01.2022 BMW E36 2 Door Bolt-In 6 Point Club spec Roll Cage Front legs, windscreen top cross bar with gusseted double diagonals through the main hoop as well as integrated harness bar with eye bolts for driver and passenger through the lower end of the back stays. Bob Marley drove a BMW , but not for the same reasons as everyone else. ... In his words: "I have a BMW. But only because BMW stands for Bob Marley and the Wailers, not because I need an expensive car.- Bob Marley. #bmwe36 #bmw

02.01.2022 Hyundai Accent ('99-'05) 6 Point Bolt-In State Level Roll Cage This Cage is comprised of single door bars, front legs, windscreen top cross bar with single diagonal and harness bar with 2 eye bolts (on driver's side only) through the main hoop as well as integrated harness bar through the lower end of the back stays. It's suitable for any racing event up to State level. Photo credit: RL GNZLZ on Visualhunt.com / CC BY-SA... #hyundai #hyundaiaccent

02.01.2022 BMW E46 2 Door 6 Point National Level Roll Cage Gusseted double door bars with additional gusseting at the windscreen pillar bar/door bar junctions, billet connectors, front legs, double roof bars, windscreen horizontal bar, harness bar and gusseted double diagonals through the main hoop and double diagonals through the back stays with additional harness bar through the lower end. The E46 M3 had a hand built engine that red lines at 8000rpm, Kevlar/carbon bumpers and alumini...um alloy bonnet to save weight. BMW claimed the car can take you from 0-100 kph in 5.2 seconds. #bmw

02.01.2022 Hyundai Excel National Level 6-Point Bolt-In Roll Cage Hyundai Motors started in 1967 by building the Cortina under licence from Ford. They then turned to ex Managing Director of Austin-Morris at British Leyland George Turnbull, to help with the direction of the 1975 Pony, as they wanted to manufacture their own vehicles. This Excel National level Roll Cage has double roof bars, front legs with windscreen pillar bars, gusseted double door bars, gusseted double diagonal bracin...g and harness bar through the main hoop and double diagonal bracing with integrated harness bar and four eyelets through the back stays. Photo credit: FotoSleuth on VisualHunt.com #hyundai #hyundaiexcel

01.01.2022 Subaru WRX GD Club spec 6-Point Bolt-In Roll Cage The "Blobeye" WRX was introduced in late 2003 with a new headlight configuration (hence the name), front and rear bumpers, and some slight modifications to the engine and mechanics. This club spec 6-point Roll Cage has front legs, windscreen top cross bar, a single diagonal brace through the main hoop and and integrated harness bar through the lower end of the back stays.... #blobeye #subaruwrx

01.01.2022 Subaru WRX GC8 4 Point Half Cage Double diagonals through the main hoop with gussets and harness bar through the lower end of the back stays. Before the first ever STi was released, Subaru came out with the Type RA. It was a heavily modified WRX that people ended up taking to competitions where they ended up doing very well.... #wrx