Award Tanks in Wynnum West | Local business

Award Tanks

Locality: Wynnum West

Phone: +61 419 971 995

Address: 24 Beverley Road 4178 Wynnum West, QLD, Australia

Website: http://www.awardtanks.com.au

Likes: 117

Add/Update information

Reviews

Tags

• Local business

25.01.2022 Hi Everyone, just a short note to let you know that I wont be able to build any tanks until 14 January 2019 as Im currently recovering from back surgery. Ill still be able to provide quotes and advice during that time just not build any tanks. Im able to book in work for the new year so please get in touch if you are planning a project and would like to book in a build time... Sorry for any inconvenience I hope you have a very merry Christmas and a happy and safe New Year Cheers Hans

25.01.2022 An unusual one today, this tank is going into the rear passenger footwell of a Discovery

25.01.2022 A few photos of a 3 tanks that I recently completed. They have been installed in the 70' motor yacht Broadway which as undergoing an extensive refit at The Yard, a very impressive large boat facility in Hemmant, Queensland. The tanks replace a set of alloy ones that had corroded badly and were unusable.

24.01.2022 A couple of photos of a tank I did this week. Nice setup in the back of a Discovery

24.01.2022 Hi Everyone, just a short note to let you know that I won't be able to build any tanks until 14 January 2019 as I'm currently recovering from back surgery. I'll still be able to provide quotes and advice during that time just not build any tanks. I'm able to book in work for the new year so please get in touch if you are planning a project and would like to book in a build time... Sorry for any inconvenience I hope you have a very merry Christmas and a happy and safe New Year Cheers Hans

24.01.2022 A few photos of a custom built tank by Award Tanks installed at the front of a drawer unit in a 200 series Landcruiser. The drawer unit was built and installed by Karl at Kruiser Kustoms. I nice neat setup and a clever use of a void space.

24.01.2022 Well I hope it's been a great Christmas and New Years for everyone. I'm back on my feet and building tanks and this is the first one out the door for the year.

22.01.2022 Here are a few photos of a couple of tanks finished late last week for the owner of a cruising trimaran. They fit neatly to the curve of the hull with the shorter one against the transom and the other one in front of it. The owner was very happy with the result

22.01.2022 Hi Guys I don't post very often but I really feel that with all the focus on the corona virus some other issues are being lost in the confusion. I've been following the Seabin Project for some time now and have watched them go from strength to strength in helping to clean up our oceans and raising awareness of the rubbish polluting our marinas and waterways.... The Seabin Project is an Australian company that is having a worldwide impact with their seabins already installed in countries around the world There are now on the final 2 days of a campaign to raise funds via a public offering to enable the further expansion of their great initiative if you are interested in being involved please follow this link to get further information. https://www.birchal.com/company/seabinproject/r/SIX6HN1D Cheers Hans

20.01.2022 Have spent some time revamping the website. You can check out my efforts at https://awardtanks.com.au/. Comments, criticisms and improvement suggestions welcomed. (please keep it clean)

20.01.2022 A few finished tanks ready for delivery

20.01.2022 First tanks of 2018 out the door

20.01.2022 Yesterday my son said to me, hey dad I found a photo of another companys water tank. Well I thought it was funny.........

20.01.2022 Bit of a different project this week, built a centre seat for a rigid inflatable. The owner is going to get a padded seat to suit

19.01.2022 Hi Everyone, Here is a job I did yesterday, its a tank shaped to fit in a slide on unit in a large ute. Delivered it this morning and it fits perfectly. Im hoping to have some photos of it in place in the next few days

17.01.2022 A couple more heading out the door

17.01.2022 Hi Everyone A couple of weeks ago I posted a message about my need to close for 8 weeks from 21 November due to some back surgery Im booked in for. Ive had many orders come in since and unfortunately I now cant fit in any more jobs between now and the 21st so have closed off the orders. Of course I am still available to provide quotes and advice but I wont be building any until around 14 January 2019... Im really sorry for any inconvenience Cheers Hans

16.01.2022 Hi Everyone, Here is a job I did yesterday, it's a tank shaped to fit in a slide on unit in a large ute. Delivered it this morning and it fits perfectly. I'm hoping to have some photos of it in place in the next few days

15.01.2022 Hi there As I let you know in an earlier post, I have to go into hospital on 25 November 2019 for hip replacement surgery. The doctor has said that Ill be out of action for 4 to 6 weeks (Im hoping that the shorter time is the closer estimate).... Im now at a point where I cant take anymore orders for delivery before the 25th. Im really sorry for any inconvenience this causes. Im happy to provide quotes if you are needing to cost up a project and also if you want to place orders for delivery in the new year please do and Ill get them done as soon as Im back in my feet. Once again Im really sorry for any inconvenience Cheers Hans

15.01.2022 Hi everyone, I'm currently away and had planned to be able to access my normal phone number. Unfortunately it hasn't worked out that way so if you have any questions or would like a quote please send an email to [email protected], or message me. I'll be back in Aus on 10 May. Sorry if you have tried to call, sometimes the best plans just don't work out. Cheers.........

13.01.2022 Just fitted a 150litre tank under the tray of a Hilux. Owner is wrapped in the result.

12.01.2022 Hi everyone, I hope you had a great Christmas and New Year. Just a short note to say that Im back on my feet and ready to go for 2020. If you have any questions or would like a quote on a custom water tank please get in touch. Cheers and Happy New Year

12.01.2022 Latest project all finished and ready for delivery

12.01.2022 Hi everyone, Im currently away and had planned to be able to access my normal phone number. Unfortunately it hasnt worked out that way so if you have any questions or would like a quote please send an email to [email protected], or message me. Ill be back in Aus on 10 May. Sorry if you have tried to call, sometimes the best plans just dont work out. Cheers.........

11.01.2022 Hi Everyone, just a short note to let you know that Award Tanks will be closed from Wednesday 21 November 2018 to around 16 January 2019. Unfortunately I have to have some back surgery and the doctor advised that Ill be about 8 weeks to recover. ... If you have any orders that you are thinking of placing please consider this in your plans. Ill still be able to provide quotes and advice during that time just not build any tanks. I am still fabricating tanks up to the closing date so if you want to place an order let me know so I can book out the build time Sorry for any inconvenience Cheers Hans

11.01.2022 Had a little idea about a box that you could use in place of a jerry can on the back of a 4wd to keep bait and fish smells out of the interior of your vehicle. Here it is undergoing "product testing" on a recent trip to Straddie.

10.01.2022 Hi All Here are a couple of pics of a tank I did recently for a very large motor home. I had already done a set of tanks for this client (fresh, grey and black water) and they decided that they wanted a bit more range. This one fits very neatly in a void space between the chassis rails. On a side note, Ill be closing from 25 November this year and will be open for business in the 2nd week of January 2020. It might seem a long time to take a holiday but unfortunately I have ...to go for a hip replacement and will be out of action for a few weeks. Sorry for any inconvenience

10.01.2022 Recently finished a little project to replace the 2 jerry can holders on a camper trailer with a single custom made tank. Pretty happy with the result. Here is the before and after view

07.01.2022 Im really proud to be sponsoring team "Wheres the 10mm socket" in this years Shitbox Rally The rally is an annual event to raise funds for the cancer council. It the largest community lead fundraiser for the Cancer Council in Australia and is now in its 11th year. Team "Wheres the 10mm socket" is Brendan Radford and Sam Radford who will be driving their shitbox (a vehicle costing under $1,000 from Alice Springs to the Gold Coast via the Gulf of Carpentaria. More info abou...t the team is available here - https://autumn2020.shitboxrally.com.au/wheres-the-10mm-sock Please get behind this event and help to raise vital funds in support of the Cancer Council

07.01.2022 Recently completed a tank for a customer with a 4wd ute with a canopy. All the rest was pretty much done (fridge drawers storage etc) all that was needed was a tank to be fitted against the front bulkhead. Here are a few photos of the finished project.

07.01.2022 A few photos of a 3 tanks that I recently completed. They have been installed in the 70 motor yacht Broadway which as undergoing an extensive refit at The Yard, a very impressive large boat facility in Hemmant, Queensland. The tanks replace a set of alloy ones that had corroded badly and were unusable.

06.01.2022 Heres one I recently completed thats designed to fit under a horse float around one of the sub-floor cross beams.

05.01.2022 Award Tanks can now accept payments via PayPal, Visa, Mastercard and American Express as well as cash and bank transfer

05.01.2022 Yesterday my son said to me, hey dad I found a photo of another company's water tank. Well I thought it was funny.........

05.01.2022 As promised, here are a couple of photos of the tank I built recently with the camper in place. A very neat fit.

04.01.2022 We do tanks of all shapes and sizes, this is a 50 litre fresh water tank that will be installed under the floor of a Cruise Craft Outsider power boat. It will be heading north to Mackay very shortly

04.01.2022 I'm really proud to be sponsoring team "Where's the 10mm socket" in this years Shitbox Rally The rally is an annual event to raise funds for the cancer council. It the largest community lead fundraiser for the Cancer Council in Australia and is now in its 11th year. Team "Where's the 10mm socket" is Brendan Radford and Sam Radford who will be driving their shitbox (a vehicle costing under $1,000 from Alice Springs to the Gold Coast via the Gulf of Carpentaria. More info abou...t the team is available here - https://autumn2020.shitboxrally.com.au/wheres-the-10mm-sock Please get behind this event and help to raise vital funds in support of the Cancer Council

03.01.2022 Hi everyone, I hope you had a great Christmas and New Year. Just a short note to say that I'm back on my feet and ready to go for 2020. If you have any questions or would like a quote on a custom water tank please get in touch. Cheers and Happy New Year

03.01.2022 Today I finished a tank for a couple that wanted to increase the water capacity of their ute back camper. The solution was a 90mm thick tank that fits between the headboard and the camper. Here are a couple of photos of the result. I hope to have photos of the tank with the camper in place shortly

03.01.2022 Well I hope its been a great Christmas and New Years for everyone. Im back on my feet and building tanks and this is the first one out the door for the year.

02.01.2022 Many thanks to Greg Torpy at Brisbane Signs for the fantastic job he did in design, making and installing the signage on my vehicle.

02.01.2022 Here are a couple of tanks I completed earlier this week. They are going between the chassis rails of an Iveco van that the owner is fitting out as a motor home. The reason for all the cutouts was so that he could get the maximum capacity while still being able to tuck up as high as possible.

01.01.2022 A couple of weeks ago I built a tank for a client to replace a stainless steel one that came out of the boat that he had recently bought. I must say that I was shocked at the state of the tank. It had been built into the boat and obviously not looked at for quite some time. The floor had to be cut to gain access to it. As much for my curiosity as anything I weighed the stainless tank and the one I had built as a comparison. The steel one weighed in at 31kg and the polypropylene was 15kg. Quite a weight saving overall. Ive just received some before and after photos of the project from my client and he let me know that hes really happy with the result. Thought Id share the photos

01.01.2022 Here's one I recently completed that's designed to fit under a horse float around one of the sub-floor cross beams.