Bissett Bodyworks. in East Devonport | Local service

Bissett Bodyworks.

Locality: East Devonport

Phone: +61 3 6427 9193

Address: 18 Church Street 7310 East Devonport, TAS, Australia

Website: http://www.bissettbodyworks.com/

Likes: 1705

Add/Update information

Reviews

Tags

• Local service
• Automotive repair centre
• Vehicle body shop

24.01.2022 2019 Renault rear bar painted, Rouge Flamme Nacre 3 layer pearl, code NNP. PPG COB, Love this colour in the sun.

23.01.2022 Some more Old School.

23.01.2022 Corey Leonard has been back on the mini resto, Starting to close in now,

22.01.2022 Kawasaki Orange PPG COB 3 layer Pearl.

22.01.2022 Darren Wall Torana, Today was a good day, after Saturday, 2 more coats of PPG base and then 4 coats PPG clear, a good bake and then it’s time to buff.

20.01.2022 Darren wall Torana, Found some more time today, Tank correctly spaced and fitted, Dash 8 fuel lines, fittings and clamps sorted.

20.01.2022 Darren Wall Torana

20.01.2022 XY Project, Finally got the shell and bonnet skin back as one today.

19.01.2022 New 3M Grippy sandpaper, game changer,

19.01.2022 Back to the Darren Wall Torana, Brake lines profiled and fitted, double flares and connectors finished, clamps and brackets done.

19.01.2022 XY Project, Boot lid next, getting ready to blast and split it open, same procedure as the bonnet, So far doesnt look to bad for a OEM panel over 50 years of age.

19.01.2022 A much needed update to the lighting in the workshop, 6 high bay leds, night time is actually brighter than daylight, once again the main man gets it sorted, thanks Super Stu.

18.01.2022 XY Project, Under side bonnet skin and frame repaired and in PPG epoxy and high fill.

18.01.2022 More old school cool bike parts, a few stripes masked out and COB and baked after, Corey striped and prepared.

18.01.2022 Corey has Dean Maxfield guards mounts removed all stripped out, coated in epoxy liner, and welded back in place, top job.

17.01.2022 Harley Guard, Black COB.

16.01.2022 XY Project, Managed to complete the bonnet, Spot welded and epoxied ready for a skim of filler.

16.01.2022 XY Project, 2 solid days working on the boot skin, Removed small dents, welded a couple of moulding holes and stripped back and metal deoxidised ready for PPG Epoxythane, To think the last person to see this boot skin like this, would have been 1970 on the Ford factory production line

15.01.2022 XY project, More progress on the XY, Bonnet bolted on to check fit up after skin frame removal and refit, Also checked guard / door adjustment with front screen mouldings, all lined up great.

15.01.2022 Dean Maxfield Torana, Corey has prepared suspension parts primed and rubbed, Got the base coat and semi gloss clear on today and baked.

14.01.2022 Vivid Black Harley guard buffed and finished.

13.01.2022 Kawasaki Orange, PPG 3 layer pearl, COB Colour match shown with original part. #bissettbodyworks #ppgaustraliaandnz #ppgaustralia #ppg #ppgpaint #ppgpaints #ppgrefinish #refinisher #refinisherslife #kawasakininja #kawasaki #satajet5000rp

13.01.2022 Darren Wall Torana, Trial fitting the 17’s with 245 Falcons. Nice clearance all round

13.01.2022 Darren Wall Torana, A bit more progress, nose cone and scuttle panel finished, stripped off all the old masking and giving the body a good clean up.

13.01.2022 Darren Wall Torana, Dash restoration complete.

13.01.2022 XY project, Was lucky enough to track down my XY’s original boot lid, outside skin blasted and stripped and deoxidised, then split open and separated the skin from the frame, as can be seen from the pictures it always pays to split them open, a lot more work to come, but so far this boot lid is looking good, Also a final fill and sand with splines on the bonnet, and PPG epoxythane.

12.01.2022 A big last couple of days, Stuart Mathews back on the tools, doing a major booth/oven update, programming and lots of software downloads to the touch screen, and new live log in monitoring on the PC and iPhone. This man is a magician, thank you Stu.

12.01.2022 Back on the Darren Wall Torana today, Dash restoration back in place, with new gauge lenses, speedo drive switches and wiring hooked back up, and ready to marry the engine ignition and ancillaries, Ive also reset the speedo back to zero purely for that new car feel, My plan is to fit out as much as I can before its released off the rotisserie, they make life so much easier.

11.01.2022 XY Project Sand down Sunday, Got a couple of hours in today.

11.01.2022 XY project, Back on the boot lid, Nothing like good protection, Before a few finishing up small welds, And after 50 + years had a couple of small splits in the edge of the skin.

10.01.2022 Ducati monster, change up to tricolour.

10.01.2022 Darren Wall Torana, dash restoration, More pictures soon.

10.01.2022 Project XY, Just having a play today.

09.01.2022 Back on the Darren Wall Torana today, Master and valve fitted, and brake pedal set and adjusted, Next, be time to make some brake lines.

09.01.2022 XY Project, Boot lid, It always pays to split them open, Over 50 years of surface rust in there.

09.01.2022 At last, Satajet X5500 Bionic.

08.01.2022 Back on the Darren Wall Torana, Over the last couple of day’s, PPG COB semi gloss black paint and bake the 9 diff after blasting, Then fitted to vehicle including king adjustable shocks, springs, and adjustable upper control arms, wildwood brakes and lines hooked up, and finished, Also did a final check on the simmons wheel offset, all clearances looking good.

08.01.2022 XY project, Boot lid skin and frame painted and baked today, flatten back and buff, and it’s ready for reassembly. PPG COB, #bissettbodyworks #ppgallery #ppg #ppgrefinish #ppgpaint #ppgaustralia #ppgaustraliaandnz #satajet5000rp #satajet #restoration #refinisher #refinisherslife #xyfalcongt #xyfalcongtho #xyfalconrestoration #xyfalcon

07.01.2022 Corey Leonard Buffed and finished the little 63 brick, all finished now and delivered to client.

06.01.2022 Give the XY a little Prepsol clean.

05.01.2022 Darren Wall Torana, Got back to doing a bit more today, Dash top restored.

05.01.2022 XY project, Outside bonnet skin now close to 80% repaired ready to bolt on and finish gapping on the car, filled with splines, sanded and in PPG epoxyprime.

05.01.2022 A couple of old school bike parts.

05.01.2022 Darren Wall Torana, I’ve had a week of masking, time to pull the trigger, should be all nice and glossy Monday.

03.01.2022 XY project, Another Saturday on the XY today, Performed a wedding ceremony uniting the boot skin to the frame, also set up some crush tubes for the rear spoiler mounts, the usual sealer everywhere before skinning.

03.01.2022 A major birthday update for the spray baking oven, A repaint, thanks Mick Damon , 60 retro fitted leds, all light fittings cleaned, and new seals. Thanks for the helpful pictures and Led model numbers Howard Astill.

02.01.2022 XY Project, Finally after splitting the bonnet skin and Shell, applied some PPG COB.

01.01.2022 Some COB on a new Harley part today.

01.01.2022 XY Project, 50 year old boot lid frame blasted, Come up a treat, PPG epoxied, a few small dents to be fixed but in the main it’s a great boot lid, next back onto the skin.

01.01.2022 Darren Wall Torana, Demister modification, Because original heater was completely removed allowing for a clean engine bay, built a in line blower modification for the demister.