Braybon Engineering in Numurkah, Victoria | Engineering service

Braybon Engineering

Locality: Numurkah, Victoria

Phone: +61 412 661 357

Address: 38 Nelson street 3636 Numurkah, VIC, Australia

Website:

Likes: 104

Add/Update information

Reviews

Tags

• Engineering service

25.01.2022 Screw cutting a 3 NPT thread on pvc pipe

25.01.2022 What happens when old reliable breaks down for the last time? New motor with a new frame, with a much bigger slab of concrete! Sub frame concerted into the ground with the top able to be unbolted for transport.

24.01.2022 Need brakes machined? Did a set of discs today! Can do drum brakes as well

24.01.2022 From machining fly wheels, to turning off half a bolt head. And big washers in between

23.01.2022 The truck tools keep on coming, rear main seal installer.

23.01.2022 Sometimes jobs come in and you think how is this going to work? Fitting an anvil on on swing arm, bolted the rear of the chassis under the tray. With a jockey wheel for support! Lucky I had a mate to help me out Bob O Brien

21.01.2022 Recently got a bigger lathe. Mainly for machine flywheels and other BIG jobs. Does a great job!

21.01.2022 Sand leveller must work ok, second order for one:)

20.01.2022 1928 A model ford head. Sadly found 3 cracks after machining it.

19.01.2022 Door lock grommet for XW Ford Falcon. Only ones that you could buy keep breaking, so I made some out of white nylon. Definitely won't break

19.01.2022 Did some rear bumper work to this Ranger, hopefully the aluminium doesn't dent as easily as the plastic did.

18.01.2022 Stainless steel spanner to fit plastic drum nuts.

17.01.2022 Make a fancy bolt with a internal hex? Hard to do, but managed a square instead Made from a 2, 3/4 drive socket.

15.01.2022 Nylon nut for a 1000L tank with a 1/2" barb insert.

14.01.2022 Modified a linisher attachment to be able to grind a 25mm DIA notch in S/S tube.

13.01.2022 Truck fly wheel and bell housing, machine both flat ready to put back into the truck. Fly wheel makes the lathe look small haha.

12.01.2022 Shovel holder for new 4 wheeler motor bike.

12.01.2022 Sand levers @ 1 and 2 meters wide. First time making these, turned out good!

09.01.2022 Hydraulic shafts with a screw on piston.

07.01.2022 Steering damper for motor bike with side kart, this helps take the shaking out of the steering caused by the side kart.

07.01.2022 Bit of wood work this time, much prefer working with metal but they did come up pretty dam good.

06.01.2022 Nylon knobs to fit 8mm stainless steal rod. M6 thread.

06.01.2022 Something out of the ordinary, custom bar stools made to design. Shipped all the way to Tassie! 3 with timber tops and two with cushion tops.

05.01.2022 Trailer wheel hubs needed some adjusting for the owner to be able to fit the wheels he wanted.

05.01.2022 Motor bike engine crank press, made for Tweaked Performance. Works good and looks good!

04.01.2022 Clutch pedal pivot off a truck, couldn’t get a new part in time so I got to make a new pin and boss with nylon bushes in the boss.

03.01.2022 Machining a Truck manifold, took a bit of set up but was worth it!