Bronco Marine in Perth, Western Australia | Boat service

Bronco Marine

Locality: Perth, Western Australia

Phone: +61 406 105 913

Add/Update information

Reviews

Tags

• Automotive, aircraft & boat
• Boat service

24.01.2022 Annual service for this clean 70hp Yamaha 2 stroke, running great again ready for another year of use.

24.01.2022 Yanmar seatrials, moving along very well got upto 8 knots and cruises around 6 now very nicely.

23.01.2022 Sneak peek at from this week's job, nauticat a 12.5m seawind we removed an old Genset, replaced both saildrives and engines with brand new Yanmar packages complete with new dash panels and control cables, back in the water today for a test run, all done in 4 days.

23.01.2022 Fit-up completed on this brand new Beneteau Antares 9m for Mansfield marine, fitted with a 350hp counter rotating duo prop Suzuki, pushing the boat to 34knots which is pretty impressive for a single outboard.

22.01.2022 Late night repairs to one of our good customers boats replacing shitty aftermarket parts that had previously been fitted it has now been fitted with a new genuine Volvo starter motor not worth the risk out in the ocean to save a few hundred $$.

22.01.2022 Another big day another mercruiser removed for rebuild/replacement the hiab is definitely getting a good workout

22.01.2022 Annual service on this little 60hp Honda, all done correctly with all genuine parts, great motor on a well set up boat.

22.01.2022 Annual service for one of our customers tender motors, as u can see no grease on anything lucky he brang it in before everything seized.

21.01.2022 2 brand new gearboxes for this leisure cat that touched the bottom and damaged the old boxes, one motor bent the driveshaft and damaged the driveshaft seals, removed the powerhead and replaced seals, the new gearboxes sound so much quieter. Another happy customer ready for summer

20.01.2022 Brand new yanmar 3ym20 install, removed the old nanni diesel and installed the new yanmar.

20.01.2022 Another big day getting lees mercrusier 5.0mpi back in. fully rebuilt motor due to previous mechanic not having any idea on what there doing.all new manifolds and risers, also performed a rebuild on the transom shield while motor was out as we found there was a crack in the transom, engine running and sounding great,

20.01.2022 Do not use Saltwater for fuel it doesnt end well.

20.01.2022 225 Honda annual service, and repairs, new thermostats and thermostat housing, impeller housing, liner and wear plate, high pressure fuel filter, clean iac and intake manifold. Adjust valve clearances. The engine sounds so much quieter and smoother now also sounds alot more responsive and running how it should again.

20.01.2022 Another video of the yanmar seatrial.

19.01.2022 The impeller from the 175 Honda luckily it didnt fail up north, the owner had just came back from a trip away not what u want.

19.01.2022 Another mercruiser out for a bit of a tidy up, we will be cleaning up all the rust and fitting some new accessories to get the vessel ready for an Abrolhos trip,

19.01.2022 Full annual services for this absolute weapon of a boat, running great again and has all genuine parts back on it now as it previously had cheap aftermarket parts fitted to it Some parts had been re-used and the block anodes had never been done before. We only use genuine parts as its just not worth the risk to save a few $$$.

18.01.2022 Carb clean and seatrial on this 8m tri hull, dropped from 2x 250hp 2 stroke v6 Yamahas down to one engine and boat still gets up over 30knots, and handles alot better,

17.01.2022 A pic one of our customer sent in from the other day putting the 5.0 mercruiser back in, having the hiab definitely makes it so much easier and dont have to pay to hire a crane.

16.01.2022 Annual service on this f250 Yamaha, along with some new block anodes and thermostats.

15.01.2022 Full annual service for this 4.3 v6 mercruiser, pretty straightforward this time with no surprises as last year we did all the major items, manifolds and risers/uni bellows ect,

15.01.2022 Annual service and some repairs to this 140 suzuki, full annual service, new engine oil cooler as it was badly corroded and leaking engine oil into the water, new propshaft seals and driveshaft seals.

15.01.2022 Another annual service completed on this 175hp verado it was a good chance to do some preventative maintenance on a few items we listed last service. New spark plugs, new belt and tensioner pulley, new air filter and thermostat. Ready for another year of boating.

14.01.2022 Annual service for this 3.0 mercruiser that hadnt been used for a long time, full service, new thermostat, new manifold and riser, drained fuel tank and fresh fuel all ready to use.

13.01.2022 Annual service on this 150hp yamaha this one needed new driveshaft seals, impeller housing and some other repairs the Main control box harness as it had gotten water into it at the extension harness and was causing the ignition to stay on with the key off.

13.01.2022 Annual service on this 250 E-tec a few repairs and a good cleanup as this top coverplate was corroded out leaking saltwater all down the back of the engine and a new hub for the Stainless Steel propeller.

13.01.2022 Job completed, full engine repower for this steel yacht, we removed the old Volvo 31 and replaced with a new yanmar 110hp the boat is now faster and more economical than it has ever been, was a lot of custom work involved in fitting the new yanmar, we had to get custom exhaust mixed fabbed up as the engine sits about 4m down into the hull, feel free to call us if your considering your next engine repower.

13.01.2022 Here's a few pictures from the nauticat repower, it was a big job but the 2 of us got it done and back in the water within the week, we had about 3mm clearance fitting the engines through the bedroom doors, the windows were just in the right spots so we could get the crane in to lift the motors we had to reposition and change the angle of the crane each time we lifted to motors. The truck has definitely proven itself again on this job as there's no way we could do the job without it. We would also like to thank Rory from op marine for propspeeding the saildrives for us, once again a great job done.

10.01.2022 Putting the new truck to good use. Now to get the engine dressed and ready to go back in the boat, rebuilt 5.0 mercruiser mpi.

10.01.2022 Another busy day, dropping a customer of ours boat off for some fibreglass modifications before we fit some serious rod holders to handle some big gear, do it right the first time no stuffing aroud here.

09.01.2022 Another late one cleaning 40hp merc/ tohatsu carbs were supposed to of been cleaned by another mechanic Less than a month ago, will be running like a new one again once Im done with it.

09.01.2022 Another late night down at Fremantle sailing club removing this volvo penta 31 for a full rebuild.

08.01.2022 A few very busy weeks ahead , volvo penta tamd70e full engine rebuild,

08.01.2022 A quick oil change and inspection on this 150mercury after the new owner just brought it, well worth it as the motor was starting to fall off and all the mounting bolts were loose, yhe boat is only 4 years old.

08.01.2022 Safe to say my customer won't be buying this one, this shows how important it is to go get a pre purchase inspection done on a boat even if it has receipts for recent work done, its amazing that they can actually sell a boat in this state, we inspect the boat for our customers not the seller they are the ones paying for the report.

07.01.2022 Another late night last night to get the job done, mercruiser out for some transom shield repairs and a tidy up of the engine. New sump, timing cover,sea water pump and starter motor while it was out. All the brackets and pulleys have been cleaned up and powdercoated, looking like a new engine again.

07.01.2022 Really not sure what to say about this one!! Some people should not be touching boats, very lucky the new owner didnt take the boat out like that could of ended very badly.

06.01.2022 V6 250hp yamaha, on a 8m tri hull

06.01.2022 Starting better than ever with a brand new genuine starter motor.

06.01.2022 Full annual service and repairs for this 175 Honda outboard running so much smoother and quieter now.New timing belt, thermostats, impeller housing, replaced the vst filter which was sucking itself in and causing the engine to run rough and surge.The iac was really loud as it was staying open just to keep the engine running.

05.01.2022 Annual service and some repairs on this yamaha f80 fourstroke, it seems that the last person to re-seal the gearbox must be half blind, see if you can pick whats wrong with the gearbox seals.

04.01.2022 Annual service and some small repairs to this f70 yamaha

04.01.2022 Another late night finishing off a leg and gori propeller annual service for this 14m catamaran.

04.01.2022 Fitted a new prop to one of our good customers brand new 150 mercury outboard should get up and go now.

03.01.2022 Big thanks to Central Tyres for fitting the new tyres, if you need tyres or rims highly recommended them wouldnt go anywhere else. #iveco #daily4x4 #mobilemarinemechanic #perthisokay #perth #boatingwa #perthboating #37s #bfgoodrich

03.01.2022 Have you ever skinned a propeller hub its not fun cutting propellers off, always make sure your mechanic uses a good quality marine grease that wont wash off.

02.01.2022 Annual service and repairs to this neat little ski boat the boat has fully been restored and now has an engine to match, cleaned carbs, new impeller housing and liner , wear plate, new impeller and found all the old blades that had broken off, a previous owner thought it was a good idea to cut half the thermostat off so that was also replaced, running and sounding great.

02.01.2022 We have a very exciting week coming up next week, 2x brand new Yanmar engine and sail drives into a 12.5m sailwind catamaran

02.01.2022 Another busy morning pulling out more mercruisers.

02.01.2022 No matter how big or small always pays to do it right will work out cheaper in the long run, this little 15hp yamaha needed some major works, removed the head and cleared out all the corrosion, removed the powerhead to make sure there were no impeller blades jammed under the engine, new thermostat impeller housing and propeller, as good as new and will be good to use for a few more years to come.