Central vic performance in Shelbourne, Victoria, Australia | Automotive, aircraft & boat

Central vic performance

Locality: Shelbourne, Victoria, Australia

Phone: +61 427 436 744

Add/Update information

Reviews

Tags

• Automotive, aircraft & boat
• Car service

25.01.2022 34 Chev pick up on the rollers will be coming back after a carby change

25.01.2022 Stock 5.7 ls in a landcruiser

25.01.2022 Ve Calais stock as a rock until a lifter Failed and chewed up the cam so it had a Calloway cam fitted

24.01.2022 Nice vy maloo fresh ls2

24.01.2022 Blakes early headed 308 Gemini

24.01.2022 Vy ss with a vcm 7 and 3.08 diff the speed limited this one on the rollers

23.01.2022 Had Tims coupe out for a run on the rollers now hes all andra teched so he could make sure she had enough fuel to keep it pegged in the deep end of the quarter mile https://youtu.be/4I52UO4JUwQ

23.01.2022 Heres a ba turbo that I found some problems with (just needed a tune he said ) pfft

23.01.2022 Delco ecu running this five litre needed some little bits then coming back for more of a run

23.01.2022 Bryce’s vx ls SS fitted with a turbo 400 and a turbo killer cam and some cnc heads on the rollers before fitting a new Holley high rise manifold

22.01.2022 This ve had a Calloway cam fitted after a dod delete impressive power and economical

22.01.2022 Tuned a clean ve Ss Ute with Otr and pacemakers

21.01.2022 I recently completed a tuning course with EFI University in Sydney and I must say how impressed I was

21.01.2022 Tuff vn headed 308 with a solid cam to check the afrs this would be fun to drive with the torque it makes

21.01.2022 Had Liam’s vy Ss Ute in for some love it had a blocked injector and fuel filter .i fitted an extra inline fuel filter before the fuel rail and fitted up a vcm otr . I Gave it a mafless tune. Not bad for a stock 5.7 manual

18.01.2022 https://youtu.be/WKePMrNuLIY

17.01.2022 Jons cammed low k vu Ute came up alright https://youtu.be/F5ndvqr2M20

17.01.2022 Cam only vy on the rollers

16.01.2022 Had jakes l77 ve SS in for a tune he did a dod delete and fitted a vcm cam and a set of extractors and an vcm Otr to his 96000k ve sounds and goes well

16.01.2022 We had jacks vn back after he fitted a bigger turbo and intercooler after popping some head gaskets it was doing my head in to find a half dead map Sensor we got a tune in it and it should be fun cruiser

16.01.2022 Vn Ss with a stock ls and a China Gt 42 sounds great on boost

14.01.2022 I had a v6 Prado in for a run on the dyno did a couple of small tweaks but a major difference was by making the car have a good earth

14.01.2022 https://youtu.be/pRJ3KIZg8Yw

14.01.2022 Check out this supper tuff na 426 Chrysler makes bucket loads of torque three carbs make it interesting

12.01.2022 This vt has been waiting in line for a while finally got it on the rollers cracked the 300 mark

10.01.2022 Congratulations to Greg Telford and crew @ 140mph this year on the salt with their little Holden grey motor

08.01.2022 Gave a cammed vu a bit of time on the rollers wiped the tune and started from scratch happy with the results

07.01.2022 Had britsys bread van in for a little bit of work its got a cast iron headed 350 coupled to a turbo 700 trans and a hilux diff . It would take some pretty big balls to give this thing all its got I recon .

07.01.2022 Nathans vt turned out alright Higgins headed stock bottom end with a Vcm 710 started life here with 223kw and 498nm of torque

07.01.2022 Well what can I say I went to Sydney to do a tuning course set up by EFI University and I am that impressed from what Ben strader presented to the class Im blown away his systems that he taught will enhance any skill set I already had and I learnt so much from the guy in two days . I hope all the guys that also did the course got as much out of it as my self . Im eager to learn wish I had of done it years ago as it will hopefully make me reach my goals

06.01.2022 Naturaly aspirated fg Ute in for a run on the rollers

06.01.2022 Had Matts 351 xd in for some dyno time

05.01.2022 Good clean fun in a Ute

05.01.2022 Britsys bread van came here last year with a 307 making around 180hp he recently fitted a new 350 in her and has more than doubled that. I gave it a couple of quick ramps and a new dizzy and a bit of carby love . Theres no way Id drive this thing hell I even stood beside it while running it up my family jewells are scared to have all that happening under the seat https://youtu.be/BQsFSPvsD-Q

05.01.2022 Gave Chriss cam only vy Ss wagon a run on the rollers

04.01.2022 Had a Ford meteor in for a base line run to check the afr and timing

04.01.2022 L77 ve with a dod delete made some nice power without an aftermarket cam

02.01.2022 Had a vl wagon on the rollers to see if I could sort it out a bit https://youtu.be/dYoXQXsRki4

02.01.2022 Had Ryans vy wagon in to have a look at the tune was told it had 235kw so we ran it up and it showed 234.7 so not a bad comparison took some timing out and changed some fueling and Im happy with the result I hope he is too

02.01.2022 Beau’s stato in for a base line run before fitting a new cam and some heads

01.01.2022 Zane has a vn five litre manual he is in the process of some alloy heads and a cam for it so we ran it up for a before work figure

01.01.2022 Nice valiant on the rollers

01.01.2022 Callans vy started out as a l67 supercharged v6 and him and a mate dropped a stock Ls1 in there