Cyclone Racing Engines in Calen, Queensland | Vehicle customisation shop

Click/Tap
to load big map

Cyclone Racing Engines

Locality: Calen, Queensland

Phone: +61 402 258 698

Address: Mackenzies Road 4798 Calen, QLD, Australia

Website:

Likes: 54

Reviews

Tags

Click/Tap
to load big map

25.01.2022 Jennifer Beggs has comissioned us to build her a engine for her XR8. We have recomended a set of Manley H-Beam Rods fitted with ARP 2000 series bolts, Manley Pistons, Ford GT Cams, Comp Cams Springs and Retainers, Comp Cams Adjustable Primary Sprockets and Cloyes Secondary Sprockets. This combo is to be force fed by a Procharger F1A and a little 50 HP shot of Nitrous. The combo should see a very comfortable 700 to 750 RWHP which will make it one very powerfull every day driv...er. We have already got the engine block machined and is awaiting our inspection before assembly Stay tuned for more updates.

24.01.2022 Jennifer Beggs has comissioned us to build a engine for her XR8. We have recomended a set of Manley H-Beam Rods fitted with ARP 2000 series bolts, Manley Pistons, Ford GT Cams, Comp Cams Springs and Retainers, Comp Cams Adjustable Primary Sprockets and Cloyes Secondary Sprockets. This combo is to be force fed by a Procharger F1A and a little 50 HP shot of Nitrous. The combo should see a very comfortable 700 to 750 RWHP which will make it one very powerfull every day driver. ...We have already got the engine block machined and is awaiting our inspection before assembly Stay tuned for more updates.

20.01.2022 Custom built sump to suit the 2005-2006 USA Ford GT Engine Block which is fitted into our own BF FPV Superpersuit

20.01.2022 Manley MMR 2500R Piston as used in our Category 4 engine build.

19.01.2022 Crank in place awaiting main caps to be fitted and tensioned.

18.01.2022 ARP Side Bolts with ARP Moly Lube.

18.01.2022 Catergory 4 Short Engine with optional Aluminium Engine Block

16.01.2022 Main Caps in and tensioned with ARP Side Bolts

14.01.2022 Category 3 Long Engine - Cast Iron Block - Ported 03 04 Cobra Heads - Manley H Beam Rods with ARP 2000 Rod Bolts - Manley Forged Pistons - Balanced Rotating Internals - Cyclone Racing Engines Cams - Comp Cams Valve Springs - Cyclone Racing Engines Coolant Cross Over - Cams Degreed In Accurately - Can be built to suit N/A, Turbo or Supercharged Applications - Contact for current pricing.

12.01.2022 Main and Thrust Bearings fitted and Lubed up with Torco Assembly Lube.

07.01.2022 As a interim measure while Jennifer Beggs engine is being built she has asked that the Procharger F1A be fitted to her BF XR8. After some minor changes to the Intake system the F1A is now fitted and all I can say is WOW!!! We are going to fit a Turbo Wastegate to the intake piping so as to allow the boost to be controled and to assist in the pressure relief when going from wide open throttle to closed throttle. But as the car is now at half throttle at 4000 rpm this thing go...es animal. A bigger fuel pump and a different fuel filter will be fitted to cope with the increased power on tap. The car will go on the rollers this Friday To be tuned.

07.01.2022 Catergory 4 Long Engine

04.01.2022 Assembly in progress for Jennifer Begg's 5.4 Only issue so far is the wrong piston rings have been sent. Have put some pix of the assembly.

01.01.2022 Jennifer Begg's Procharger P1SC Supercharged BF XR8 Sedan will be racing at Palmyra Dragway tommorow night. Jennifer will be hoping to better her P.B of 11.91 @ 117MPH. Jennifer has had a set of 1 7/8 Stainless Steel into 3 inch collector pipes. Good Luck Jennifer.

Cyclone Racing Engines in Calen, Queensland | Vehicle customisation shop