Dawn Tools in Heidelberg West, Victoria | Tools/equipment

Dawn Tools

Locality: Heidelberg West, Victoria

Phone: +61 3 9457 6111

Add/Update information

Reviews

Tags

• Shopping & retail
• Hardware shop
• Tools/equipment

25.01.2022 T-BAR (SASH) CRAMPS/CLAMPS - SUPER GRADE - ALUMINIUM T-BAR At Dawn Tools we make more than Vices and G-Clamps. Our T-BAR Clamps have ....... A 25 year Warranty Come in the 9 lengths from 750mm to 3500mm And in Heavy Duty and Light Duty models These cramps/clamps are Australian Made and are primarily designed for the cramping of large section work pieces for joint gluing and general applications. Used by carpenters, builders and cabinet makers. The jaws and nuts are made from ductile iron and the Acme threaded screw and handle are high quality corrosion resistant steel. The sliding jaw is fastened to T-bar by inserting a steel pin through one of the locating holes along the bar. The T-bar sections are specially heat-treated Aluminium for strength and will resist twisting and distortion. The fixed jaw comes with drilled feet for fixing to a work bench. The heavy section cramp is more robust and is suitable for heavy-duty work For more information simply email [email protected]

24.01.2022 We Fabricate Vices. Straight, Right Hand Offset & Left Hand Offset Australian Made - 25 Year Warranty Ranging in sizes from 100MM, 125MM, 150MM & the Mighty 200MM.... FABRICATEDENGINEERS' VICES These vices are designed for all heavy-duty work and are manufactured from heavy steel plate. Long life is assured with case hardened replaceable steel jaws, replaceable nut, corrosion resistant screw and handle. Precision machined bearing surface ensures smooth operation. Fabricated vices are available in Standard Engineer's or Offset Standard or Offset - Left Hand design. Fabricated Left Hand Offset Vices This left handed offset vice enables the entire workbench to be utilized. It allows the user to operate from the other corners of a workbench while utilizing the major advantage of an offset vice, namely the ability to hold long vertical work with the full width of the jaws without obstruction from the main body of the vice. Part numbers/Models are as follows... FABRICATED VICES STANDARD - AUSTRALIAN MADE 60205 VICE, FABRICATED, 100MM 60206 VICE, FABRICATED, 125MM 60207 VICE, FABRICATED, 150MM 60208 VICE, FABRICATED, 200MM FABRICATED VICES OFFSET - AUSTRALIAN MADE 60212 VICE, FABRICATED. OFFSET, 100MM 60213 VICE, FABRICATED. OFFSET, 125MM 60214 VICE, FABRICATED. OFFSET, 150MM 60215 VICE, FABRICATED. OFFSET, 200MM LEFT HANDED FABRICATED VICES OFFSET - AUSTRALIAN MADE 60212-L LEFT HANDED VICE,FAB.OFFSET, 100MM 60214-L LEFT HANDED VICE,FAB.OFFSET, 150MM 60215-L LEFT HANDED VICE,FAB.OFFSET, 200MM These are sold at one of our resellers found here. http://www.dawntools.com.au/find-distributor If you need further information please call on 03 9457 6111 or email [email protected]

23.01.2022 Did you know DAWN makes Vehicle Mounted Vice Stands? Made in Australia - 25 Year Warranty Provides a secure platform from where to use your vice Ideal for tradesman, mobile workshop, farming, campers... Easily stowed away when not required Portable Mobile Workshop essential Mounting plate provided to suit customer supplied vice mounting hole configuration Stable, Sturdy and Strong Easily fitted If you need more information email [email protected] or call 03 9457 6111 You can buy from one of our resellers found here http://www.dawntools.com.au/find-distributor All the Best.

23.01.2022 Dawn Tools would like to let you know that we do Manufacture in Australia. Vices, G-Clamps, Sash Clamps, ETC which are Made in Australia have 25 Year Warranty! You can purchase these from one of our re-sellers found here.... http://www.dawntools.com.au/find-distributor

21.01.2022 Vice Restorations ! Whether its a vice that dad or granddad had for 40-50-60 years before passing it on.... Or a vice meticulously restored from the the second hand market...... We love being able to supply parts and we especially love their stories... Checkout this cool restoration of a 100MM (4 Inch) Engineers Vice in Blue with white Trim, a new set of Jaws and Magnetic Soft Jaws. And how about this striking 150MM (6 Inch) Engineers Vice with Red and White Trim. Got a restored vice? Restoring a vice? We would love to know its story.

20.01.2022 VEHICLE (CAR) STAND - 25 Year Warranty Yes - Dawn make these here in Melbourne. Very likely many quietly live in Garages and Auto Work Shops all over Australia.... If you one or two or three, we would love to see them.... PART NO. 62187 SAFE WORKING LOAD 2 TONNE MIN. HEIGHT 280 MM MAX. HEIGHT 450 MM DIAM. OF BASE 227 MM WEIGHT 6.7 KG This high quality car stand has a heavy duty S.G. ductile iron base. It is suitable for service stations, garages, panel beaters and car maintenance enthusiasts. The adjusting screw has an Acme thread for strength and quick adjustment. It complies with Australian Standard 2538-1985. You can buy them from one of our Re-Sellers found here http://www.dawntools.com.au/find-distributor

19.01.2022 For over 100 years Dawn Tools has been producing the worlds best vices in Australia. All over Australia seasoned trades know that if you want to buy a vice that will last then you buy a Dawn. So Dawn Tools would like to introduce to you our range of Offset Vices.... The Offset feature provides the facility for holding long vertical work with the full width of the jaws without obstruction from the main body of the vice. They are available in both Standard Cast Iron or Super Grade Ductile Iron which are GUARANTEED AGAINST BREAKAGE. Buy this vice and in 20 years you will still have the best vice, plus years of reliable service. This is truly a long lasting grand Australian made vice. JAW Sizes available are 100mm, 125mm, 150mm. Australian Made with a 25 Year Warranty! Email: [email protected] or call 03 9457 611

19.01.2022 DAWN's CAST & SUPER GRADE OFFSET VICES ... BEST IN CLASS Made in Australia - 25 Year Warranty. The Dawn Cast Engineers Offset Vices have all the features and benefits of our Standard Vice.... In addition, the Offset feature provides the facility for holding long vertical work with the full width of the jaws without obstruction from the main body of the vice. They are available in both Standard Cast Iron or Super Grade Ductile Iron which. The Super Grade Offset Vices are the JEWEL in the crown of vices produced by Dawn. They provide positive grip without springing and are ideal for heavy-duty applications. This world class vice which is unique to Dawn and is simply the best vice a tradesman can own. Buy this vice and in 25+ years you will still have the best vice, plus years of reliable service. This is truly a long lasting grand Australian made vice. Models Available are as follows... ENGINEERS VICES OFFSET 60178 VICE,ENG.OFFSET,100MM $543.66 EX GST 60180 VICE,ENG.OFFSET,125MM $749.16 EX GST 60181 VICE,ENG.OFFSET,150MM $965.06 EX GST SUPER GRADE VICES OFFSET 60195 VICE,ENG.,SGO/S,100MM $691.50 EX GST 60196 VICE,ENG.,SGO/S,125MM $875.10 EX GST 60197 VICE,ENG.,SGO/S,150MM $1,228.00 EX GST If you need more information email [email protected] or call 03 9457 6111 You can buy from one of our resellers found here http://www.dawntools.com.au/find-distributor DEMAND A DAWN.... All the Best.

12.01.2022 JAWS !! Dawn provides via its distributors replacement JAWS for your vices. Nothing makes us happier than providing this simplest of replacements because we know that to some their vice is more than another tool. ... Its been in the family for years, perhaps decades and has been handed down from father to son. To others, their vice has paid itself off years ago and this simple replacement will give them many more, . So we thought we would show you the few basic steps needed to order your replacement JAWS. If you need more information email [email protected] or call 03 9457 6111 You can buy from one of our resellers found here http://www.dawntools.com.au/find-distributor DEMAND A DAWN.... All the Best.

12.01.2022 ONE HANDED G CLAMPS This unique one Hand G Clamp leaves one hand free to hold items being clamped whilst the other operates the clamp by means of a special knurled nut. I beam frame section ensures maximum frame loading and resistance to twisting... Two start rolled thread for quick clamping Square frame for maximum clamp usage Comes in three sizes.... Part No. DW73040 G CLAMP ONE HAND 100mm Part No. DW73060 G CLAMP ONE HAND 150mm Part No. DW73080 G CLAMP ONE HAND 200mm Need to know more? Email [email protected] or call 03 9457 6111

12.01.2022 The 62168 10 Ton Hydraulic Pipe Bender - With Super Grade Formers 15 To 50mm 10 Ton Heavy Duty Hydraulic Unit based on military jack design Robust construction with quick bending and release action Designed to bend from extra light to extra heavy pipes with excellent results.... Simple set up and operation produces accurate bend every time. Pipes do not require heating and it is portable thus saving time. Concealed pressure relief valve minimises the possibility of damaging working parts Comes complete with six formers made from S.G. (Ductile) iron Applications water services, gas services, handrails, gates, framework etc. For bending ERW, galvanised, gas, water & steam pipesSize of former relates to inside diameter of pipe Formers have 36mm diameter hole to take 35mm diameter hydraulic Former Sizes 20, 25, 32 and 40 mm formers have elliptical profile. Pipe Bender Stand (Sold Separately) Extremely rigid and durable, this lightweight portable stand is easily set up and taken down, saving operators valuable time and effort. This stand will also accommodate the Dawn pipe vices, and up to a 100mm Engineers vice (Part No. 62151M) You can purchase these through our resellers http://www.dawntools.com.au/find-distributor Email [email protected]

12.01.2022 To our friends in the USA we extend to you an invitation to check out our high quality Vises, Clamps and accessories at our dedicated US site https://www.vise.tools/ We back our vises and clamps with a 25 Year Warranty. Dawn Tools has been producing top tier tools for over 100 years in Australia. ... So please, take a look and you will the quality is evident. You can download the product brochure here https://www.vice.tools//u/2019/09/DAWN-BROCHURE-4pp-A4.pdf Cheers.

10.01.2022 MACHINE (DRILL PRESS) VICES - SUPER GRADE 25 Year Warranty. 3 sizes. These vices are made in Australia and are designed specifically for machine shop or tool room use and have accurately machined slide faces, case hardened replaceable steel serrated jaws, corrosion resistant screw and handle. The bottom of the base is also machined for stable mounting and slots are provided for holding down bolts.... PART NO. .. DESCRIPTION . RRP 60219 VICE,MACHINE,75MM $296.27 60220 VICE,MACHINE,100MM $336.56 60221 VICE,MACHINE,125MM $545.13 You can buy them from one of our re-sellers listed here... http://www.dawntools.com.au/find-distributor

10.01.2022 PIPE VICE - CHAIN TYPE BOTTOM SCREW - SUPER GRADE - Australian Made - 25 Year Warranty. They come in 3 sizes with the following Part Numbers. 60272 TAKES PIPE TO DIAM. - O.D. 65 MM ... 60273 TAKES PIPE TO DIAM. - O.D. 120 MM 60274 TAKES PIPE TO DIAM. - O.D. 175 MM Larger length diameter pipes can be accommodated by the addition of extra lengths of chain as necessary. Its sturdy, compact design makes this a very popular lumbers tool. Equipped with machine cut and heat treated, it can be rapidly tightened to provide a very powerful grip which makes the pipe immovable. The high tensile chain goes over the pipe and is fastened into the slot at the side of the two V shaped jaws. This pipe vice is recommended for use with the Dawn Folding Vice Stand.(Part No. 62151M) Mounting Hole measurements provided in the images. If you need further information give us a call on 03 9457 6111 or email [email protected]

10.01.2022 DAWN WOODIES - NEW & BUSH FIRE ROASTED & RESTORED?! DAWN'S WOODWORKERS STANDARD VICES We have the following models....... AUSTRALIAN MADE - 25 YEAR WARRANTY 60241 175MM 60242 200MM 60243 225MM 60244 250MM 60247 WITH PEG,175MM These vices are Australian Made, made from robust castings and are designed with generous jaw area which gives even clamping on the whole depth of the work-piece. Long life is assured with replaceable nut, corrosion resistant screw and handle. The square body seating enables easy fitting to work bench and large diameter slide bars run into accurately machined guide holes to provide a smooth parallel movement. Vice body and sliding jaw have provision for attaching wooden liners to protect the vice, work piece and working tools. AND !! *** Cunningham Engineering *** https://www.instagram.com/cnghm_eng/ provided images of his Bush Fire Roasted Wood Work Vice which was SUPERBLY RESTORED. Please visit them on Instagram. Check out the gallery for before and after images of the restoration. Great proof of our Woodies Robustness and Australian restorative know how. If you need more information please call on 03 9457 6111 or email [email protected] You can purchase these from one of our re-sellers here http://www.dawntools.com.au/find-distributor

06.01.2022 How is a Dawn Engineer's Vice Made? Thanks to Ajax Foundry (one of our great cast suppliers) we present the manufacturing of our 60153 - 100mm Dawn Vice. Visit at:... http://www.ajaxfoundry.com.au/ 60153 Vice Engineers,100mm RRP $268.25 (ex GST) Please purchase the 60153 100mm from our distributors DEMAND A DAWN! ; http://www.dawntools.com.au/find-distributor

04.01.2022 MARINE GRADE 316 STAINLESS STEEL FABRICATED ENGINEERS VICES They come in 100mm (4') 150mm (6') & 200mm (8') JAWS Designed for all heavy duty work in marine, chemical and specialist environments.... Manufactured from Marine Grade 316, non magnetic stainless steel which is corrosion resistant. Comes as Standard or with Offset advantage which allows the user to work on long vertical sections with the full width of the jaws without obstruction from the main body of the vice. Replaceable case hardened jaws, with a V notch to hold round objects. Precision machined bearing surface for smooth operation. AND...We can make to order Left Hand Offset Versions. Need to Know More : Email [email protected] or call 03 9457 6111

04.01.2022 ENGINEERS VICES - CAST IRON & SUPER GRADE Our (Dawn Red) Cast Iron vices are most commonly used for workshops and garages. Sizes ..... 75mm (3'), ... 100mm (4'), 125mm (5'), 150mm (6'), 200mm (8') & Swivel base models are available. Our Super Grade (Hammertone Green) vices are the strongest in the range of vices we manufacture. Sizes ..... 75mm (3'), 100mm (4'), 125mm (5'), 150mm (6') & Swivel base models are available. DAWN manufacture the most comprehensive range of vices with in excess of 100 years experience in manufacturing vices has gone into design, accuracy, and gripping capacity.DAWN vices are unequalled for quality and value. You can buy our vices from one of our re-sellers here http://www.dawntools.com.au/find-distributor Need to know more? [email protected] or 03 9457 6111 We wish you all the best through these strange and trying times.

04.01.2022 DAWN TOOLS - 103 Years and Still Going Strong. Dawn commenced operations in the Melbourne suburb of Coburg, Victoria in 1917 under the name of Dawn Manufacturing Co. It was founded by the four Blake brothers, who were all engineers. The first products manufactured were vices. Since then......... Dawn has traded through..... All the Wars Australia was engaged in, All the Recessions, All the Depressions, All the Good Times in between, And Even now with this miserable Virus, We are still here today to provide you the best Vices, hand tools and clamps in the world. Buy Australian Made Dawn Tools & Vices support Australian Manufacturing. 25 Year Warranty on All Our Australian Made Vices & Clamps. We wish you all the best in these strange and difficult times.

02.01.2022 FABRICATED LEFT HAND OFFSET VICES?! Yes, that is correct. For all those Southpaws out there....... Dawn makes 3 models. 60212-L 100mm (4'), 60214-L 150mm (6') and the Mighty 60215-L 200mm (8'). All with a 25 Year Warranty! These left handed offset vices enable the entire workbench to be utilized. It allows the user to operate from the other corners of a workbench while utilizing the major advantage of an offset vice, namely the ability to hold long vertical work with the full width of the jaws without obstruction from the main body of the vice. Do you have one? Do you have both Left and Right Handed ones? Want to know more? Email [email protected] or call 03 9457 611.

01.01.2022 The Mighty 200mm (8 inch) Engineers Cast Iron (with Swivel Base Option) and Fabricated vices are the heavies of Dawn's range. Weighing in between 37 to 76 KG depending on the model, these vices are designed for serious work and we back it with a 25 Year Warranty. Looking for a new one? Check out our pics, note the model and Email [email protected] or Call 03 9457 6111.... Needs parts? Email [email protected] or Call 03 9457 6111. Got an old Dawn 200mm/8 Inch vice? We would love to hear its story and see its pics !