Demon's Forge in Gold Coast, Queensland | Metal fabricator

Demon's Forge

Locality: Gold Coast, Queensland

Add/Update information

Reviews

Tags

• Home improvement
• Fence & gate contractor
• Metal fabricator

24.01.2022 Art Deco Security Door This was fabricated by Glenn (Chris' Father). This door presented a bit of a challenge as the opening wasn't quite square or level, being an old Queenslander house. We'll have some finished pictures in a few weeks. But this turned out fantastic and the Clients were quite happy!

22.01.2022 Hey Fans, Chris here. While on hiatus I'm doing some projects for myself and will post up photos here as they take form. Today's build was a coffee station of what bits I had lying around from other projects.... Most of frame is 50*25*3mm duragal steel section with some 25*25*3 section to support the shelf underneath. I did use some 50*25*3 section at the back of the shelf so I could mount a power board for the 4 machines. The timber is beech pine. Straight off the shelf at Bunnings and two coats of Satin Polyurethane. The top piece can lift out for regular cleaning, the shelf is fixed with two countersunk metal drilling screws. I used plastic caps for the feet so as not to scratch the tiles. I'm leaving the ground down welds unpainted as I want a patina to take effect. It's heavy, it looks rough but it's a solid piece. If you couldn't tell.... I REALLY like coffee

22.01.2022 What's old is new again! Our Client had been searching for nearly 18 months looking for someone to reuse these old hand forged double gates from his property at Sandgate. No one else would take the job on. A small modification to the front stone fence allowed the driveway to be widened. So we opted to turn these old double gates into a slider, with a new piece made for the center. ... Two different styles from two different periods of design. It was a challenge start to finish but we're glad it turned out. We'll have final install photos up in a few weeks.

22.01.2022 Sitting at a local Cafe and we see this. A Hot Dipped Galvanised railing. Across from the beach. Salt air corrodes metal at an incredible rate. These rails in other other environment have a dull silvery finish.... These are already due to be pulled out, repaired, hot dipped again and reinstalled. That's a great expense to any business or home owner. So how do we avoid this kind of problem? We would use Aluminium instead of steel. You might think Aluminium isn't as durable or tough and is flimsy. That's not true. The process of treating and powder coating aluminium for beach side conditions is not only cheaper but makes it more durable than hot dip galvanising. Aluminium is going to last far longer and far better than steel over a 3yr+ period. We also do wrought iron look aluminium, it's the future of our business.

21.01.2022 Something is coming. It whisper's from the shadows. Its eyes burn with the glow of the Forge. 01.07.2020.

20.01.2022 Something a little different We borrowed some elements from an old Wrought Iron Door our Client had found at an Antique shop. We used the twisted bar and 'horse shoe scrolls as the main two elements.... Powder coated in Mannex Black.

13.01.2022 Twisted Bar Handrails These were fabricated by Glenn & Chris. The top and bottom rails are 50x25x3mm RHS and the bars are 14mm square, powder coated in Mannex Black. These were made for the old Family Home Chris grew up and that his Parents, Rhonda & Glenn have recently renovated. ... Believe it or not, these handrails were fabricated entirely from Aluminium. Ryan didn't believe it when he came up for a visit!! Most people can't believe it. Fabricated to Australian Standards and Council Regulations, Aluminium is just as good as Iron in this case.

13.01.2022 Sun Dance 2019 Design Earl Strunk - Struming Design... Fabrication Chris Wood - Demon's Forge The Dancing Brolga has to be my most favourite commissions of 2019. Earl put a huge amount of effort into the design of this gate, using Non-Uniform Rational Basis Splines (NURBS) to form the curves. Earl had a really nice resin cast into the gate for the head of the Brolga and the sun light shines beautifully through it. The gate is installed at Revival Art and Design if you want to check it out. Grab a coffee from Espresso House Windsor right next door when you visit!

11.01.2022 Wrought Aluminium Balusters These were made for another fabrication company. They ended up being used in some Juliet Balconies.... We also fabricate to size and powder coat balusters for Builders doing timber staircases. Tag your Builder in the comments section if you want Wrought Iron or Wrought Aluminium in your timber staircase! We ship country wide

10.01.2022 Preview of our Wrought Aluminium Security Enclosure. Our Elderly Clients wanted some extra measures added to their home after some B&E's in the area. Wait for next weeks post to see the finished result!

05.01.2022 Thanks for the comic Matt!

02.01.2022 Support Covid19 is going to have an affect on a lot of small business’s like my business.. so can you all help us and our business out? Scroll across the top to the right, go to COMMUNITY Click INVITE FRIENDS... Click ALL Wait 10-15 seconds for the invitations to send - it’s as simple as that - COMMENT DONE & I’ll Do The Same For Your Business. Supporting small business’s doesn’t require spending money. It’s as simple as sharing, liking and promoting us! It really means a lot Thank you!!! Copied and Pasted from another small business (InfinityPATH ) Stay safe people See more

01.01.2022 Security Gate - Pool Side This gate was made with accessibility in mind. It's fitted with an Electric Strike and remote fob and self closing hinges. The small corridor leads to an elevator that was installed for wheelchair access. This was another one of our Aluminium Projects, perfectly showing what's achievable with the right knowledge.

01.01.2022 Earl from Struming Design came up with this concept. After a couple of trial runs with one design, we opted for something slightly different. What works on paper doesn't always work in the real world. Metal can't always form to the design but it can come very close! We think this turned out splendidly!... If you want one, you need to contact Struming Design. They have the exclusive rights to the fabrication of this piece!