Elite Fab Works in Sunshine Coast, Queensland | Automotive, aircraft & boat

Elite Fab Works

Locality: Sunshine Coast, Queensland

Phone: +61 413 731 492

Address: 2/22 Hancock way 4551 Sunshine Coast, QLD, Australia

Website:

Likes: 553

Add/Update information

Reviews

Tags

• Automotive, aircraft & boat
• Metal fabricator
• Automotive
• aircraft & boat

25.01.2022 We have been lucky enough to get on board and help out our friends at Gingerbread Racing with welding in an entry level cams spec roll cage into there subaru wrx hill climb car. Cant wait to see how the boys go at the next event!

25.01.2022 Nicks Dmax came in today for some fill in panels between the tray and mud guards. Came up awesome and Nick is happy as!

23.01.2022 Huge day on Matts C33 laurel tubs. Got both sides fabbed up, welded and cleaned up this arvo. Few holes to plug up tomorrow to shave the engine bay and modify the radiator support then shes ready for the panel shop

22.01.2022 Haydens np300 navara came in this morning to fabricate a 3" stainless dpf back exhaust dumped just before the rear diff. We kept it nice and tucked up aswell

20.01.2022 Its Christmas in July! Felt like a kid again unwrapping our new EverlastWeldersUSA 350ext powertig today! Cant wait to see what this baby can do Here a few shots of some welds from our everlast 255ext tig!

20.01.2022 Tims mental VL all buttoned up today with a custom intercooler and bottom pipes to suit. Back on the dyno next week and keen to see what this thing will put out!

19.01.2022 Jakes subaru liberty in today for a custom catch can/washer bottle. We also fabricated the intercooler piping a little while ago too.

19.01.2022 Tims mental VL in at the moment for a new 4" turbo back stainless exhaust, 50mm screamer pipe, 4" side pipe for the track and a custom intercooler and bottom pipes to suit. Full exhaust is done, onto the side pipe and screamer tomorrow while we wait for the intercooler core to arrive. Exhaust is tucked up as high as possible as the car sits pretty low

19.01.2022 A custom drift trike weve been building for a customer the last couple afternoons. We bent and fabricated the main frame and mounted everything to suit. Should go well with the 6.5hp motor on the back!

18.01.2022 Who doesnt love a bit of colour on there welds

18.01.2022 Made a start on dans 3.5" stainless exhaust this arvo. Hopefully finish it off tomorrow arvo once a few other jobs are done that are booked in

18.01.2022 Nothing like getting a little practice in on the rotator in between jobs. 2.5" stainless v-band and 1.5" sch10 stainless steam pipe with full peno. Loving the new rotator

17.01.2022 Jebediahs 180sx in for some fab work. Custom cooler piping, 4" air intake, 3" dump pipe, mount 45mm wastegate and screamer pipe

16.01.2022 Big more progress done on codys supra, intercooler welded up and piping all done. Only thing left is the catch can and overflow bottle. Then pull everything out ready for ceramic coating and powder coating

16.01.2022 Daves torana in for a 6 point national spec cams cage. Made some good progress on it the last 2 days. Few more bars left to go in then its time to start welding. After its all welded in position we can start fabricating all the gussets

14.01.2022 Codys Toyota supra came in today for a heap of work over the next few weeks. Starting off with a custom T4 spilt pulse exhaust manifold, twin 40mm screamer pipes, 3.5" stainless exhaust, custom front mount intercooler and piping to suit. Will be a few more photos to come once we start making some progress on the car!

14.01.2022 Our good mate Shaun dropped by the shop today and took some killer photos while we were working on Aidens Triton Ute and building merge collectors. Heres some of the photos he shot!

13.01.2022 Quick play around this morning on the new rotary turntable. Still need a bit more practice on it but just need some more hood time on it! This is a 3" stainless tube, back purge and penetration came up a treat aswell. This was only the 2nd weld Ive done on the table to pretty happy so far

13.01.2022 Today we had Benjamins 2016 subaru wrx sti in for a little exhaust repair. We cut out the old flex bellow and replaced it with stainless tube a bit more tucked up.

13.01.2022 Making some good progress on dans wrx. Up pipe fabricated and welded up, dump pipe is done and mounted the 45mm external gate. Just need to put the up pipe back out to weld the wastegate port then its time to finish the 3.5" stainless exhaust

13.01.2022 Finally got back around to codys supra today finishing off the turbo manifold and welded up the dump pipe. Now onto the twin 40mm screamer pipes and finish off the 3.5" stainless exhaust. Waiting for the hypertune intercooler core to show up then start building custom end tanks and intercooler piping to suit.

12.01.2022 Some more progress made today on Johnnys XT forester, cooler piping all finished off, catch can/overflow bottle and Expansion tank done. Now just the exhaust left to finish off.

12.01.2022 A few Nissan navara NP300 exhaust systems in the works at the moment for the legends at Auramotive Mechanical Solutions. Made a start on the dpf delete pipes, egt bungs and exhaust mounts left to weld on then these are good to go!

11.01.2022 A heap of ultibends rocked up today for some jobs booked in next week. These are definitely the best stainless steel bends on the market

11.01.2022 Dans GD wrx came in today from the gold coast for a new rotated turbo setup and intercooler piping. Ripped out all the old rotated setup from another shop and starting fresh to suit the new Corsa Veloce intake manifold. More photos to come once we make some progress on it.

10.01.2022 Fabricated a few 4 into 1 stainless steam pipe merge collectors today for some up coming jobs. Just need to finish porting them up then they are ready to go. We have a few 400+kw subarus coming in soon for some new big runner exhaust manifolds and rotated turbo kits

10.01.2022 Aedins Nissan Navara in for a dpf delete today, thanks to the boys at Auramotive Mechanical Solutions

10.01.2022 Aidens triton in today for a 3" stainless DPF back exhaust

10.01.2022 Braedens Audi TT in for some exhaust mods today. Had a fair bit of exhaust drone at cruising speeds so we fabricated a new stainless mid pipe with a 100 cell high flow cat and a growl resonator which has now eliminated the droning!

09.01.2022 Kyles triton came in Friday for a 3" stainless DPF back exhaust

07.01.2022 Been a crazy past few days. Almost finished up on Daves torana roll cage. Only a couple small gussets left to weld in first thing tomorrow then its all finished. Also fabricated a false floor on the drivers side. And finally some tubs arrived for Mattys c33 laurel today so will be onto that over the next few days

07.01.2022 A couple of Fan shrouds knocked up this morning to mount these new SPAL fans into a subaru forester for our good mates over at Rising Sun Subaru

07.01.2022 Johnnys forester all buttoned up today finishing off with the cat back exhaust. Back on the tow truck to Rising Sun Subaru tomorrow to let them work there magic.

07.01.2022 A bit of welding from early this morning. Once the flex bellow arrives we can finish off the dump pipe

06.01.2022 Back onto codys 2jz supra again today, finished off the 3.5" stainless exhaust and twin 40mm screamer pipes. Tucked the cat and resonator up into the gearbox tunnel to keep plenty of ground clearance as the car is relatively low. Intercooler core had now arrived so will be time to fab up custom end tanks and cooler piping to suit.

06.01.2022 Bit more done on Tims VL today, screamer pipe and side pipe all done. Onto the intercooler when the core arrives on Monday

05.01.2022 Sians RZ toyota supra exhaust all done. 4" stainless steel exhaust with a varex muffler

05.01.2022 Little coolant expansion tank fabbed up this arvo for Johnnys XT forester

04.01.2022 Today we finally got a chance to start on Sians Toyota RZ supra! We fabricated a baffled catch can and overflow bottle setup where the battery used to be. Just waiting for mufflers to arrive and we can start on the 4" stainless exhaust

04.01.2022 Mitchs mint ford g6e turbo came in for a wastegate mod on the turbine housing, screamer pipe and a couple little exhaust modifications

03.01.2022 Axel's GQ patrol in today for some front mount intercooler piping. Drivers side is pretty tight but we made it all fit

03.01.2022 Darcys NP300 navara came in today for a custom airbox to suit his aftermarket stainless snorkel. Came up great for raw finish.