Australia Free Web Directory

Elite Composites | Vehicle customisation shop



Click/Tap
to load big map

Elite Composites



Reviews

Add review



Tags

Click/Tap
to load big map

25.01.2022 Elite Composites are excited to announce the launch of our brand new online store & website, offering all things composites! From materials & expert advice, to custom fabrication, our online store has everything you need to produce a quality product, from start to finish! www.elitecomposites.com.au



20.01.2022 speedcafe.com.au story about Racer Industries/MARC Cars Australia Ford Focus V8's ready to tackle Bathurst 12 hr, complete with Elite Composites Carbon fibre roof panel, boot panel, dashboard and front diveplanes. The roof, dash and boot combine to give total weight saving of almost 30kg!

18.01.2022 As you may know, our online store is currently down, as we are working towards some exciting things in the future! In the meantime, email us any of your enquiries for material needs to [email protected]

17.01.2022 A super easy one today. Aviation/Formula 1 grade premium "pre-preg" 2mm thick carbon fibre flat panel, with an absolute mirror gloss finish on both sides, right out of the mould, no need for polishing or painting. If these interest you, keep watching this space...



17.01.2022 https://www.ebay.com.au/itm/112992310814 We are having an old stock clear out over the coming weeks. First up is a 25m roll of 1000mm wide 200gsm carbon fibre twill weave. Get in quick because at $25 per metre it's sure to get snapped up!

17.01.2022 MARC Cars Australia setting up at Bathurst 12 Hr. Carbon fibre dashboard produced by Elite Composites, weight = 830 grams! Good luck guys!

15.01.2022 Epoxy Resin Infused Carbon Fibre Rigid Sheet; now available on our website. Made by our experienced and expert technicians and features a virtually pinhole free, high gloss finish in various sizes from 250mm x 250mm up to 2 metre x 1 metre sheets! Currently we have 1mm and 2mm thicknesses in stock, with other sizes and thicknesses available on request!



15.01.2022 A brief insight into how composite components are manufactured by current Formula 1 World Champions.

14.01.2022 Carbon fibre boot panel for MARC Cars Australia Focus V8. This product comes out of the mould with the gloss finish as shown, so requires no post-painting allowing for further weight reduction. Original steel panel comes in at over 12 kg before priming and painting. Total assembled Carbon fibre product weight ready to fit to car is 2.88 kg.

14.01.2022 Next in our stock clearance is 39m of 1000mm wide; 200gsm carbon fibre twill weave. This is weave set material in 2nd quality; so it has a few minor imperfections here and there, but absolutely nothing wrong with it for first (visual) layers in small parts or back-up layers in large parts. Get in quick because at $20 per metre it's sure to get snapped up! If you need an estimate on freight/postage, hit us up in the comments or send us a message! https://www.ebay.com.au//Carbon-Fibre-200gsm/113071772514

13.01.2022 More dash binnacles for Aussie Racing Cars. These were designed, prototyped and manufactured by Elite Composites and feature in all the Holden Cruze and the new Nissan Altima version Aussie Racing Cars. There are no glue/bond lines as they are one single piece, resin infused carbon fibre.

12.01.2022 The elves at Elite Composites have been very busy producing top quality carbon fibre components. Moulds were prepared on Monday morning, parts were ready for despatch by Tuesday at 9pm, just in time for Christmas!



11.01.2022 We're working on something exciting at Elite Composites. HINT: It's something you've (probably) never seen in Australia....What do you think it could be?

10.01.2022 When we were asked to replicate and add 75mm in height to this Air Filter Guard for Midget Speedway racing cars, we include the top quality and high gloss finishing as standard. The shorter item on the left is imported from the U.S.A from a globally leading composites manufacturer. The taller product on the right is produced by Elite Composites on the Gold Coast, Australia.

08.01.2022 The first product to be produced in our new factory, 2m x 1m epoxy resin infused, high gloss, pin-hole free carbon/Kevlar composite panel. This product is one of several that will be cut into panels for speedway racing. The bulk of the structure is Kevlar to resist impacts and features a carbon fibre skin for the unmistakable aesthetic qualities.

07.01.2022 We are working on something very exciting at Elite Composites and all will be revealed in just 2 days time...

06.01.2022 We have just reached 200 page "likes" - thanks everyone!

05.01.2022 MARC Cars diveplane moulds being prepared for production run for the new batch of cars. These moulds were made in house at Elite Composites. No matter what your project is, we can make patterns, moulds and final parts to your requirements. Speak to us about how we can help you today!

02.01.2022 Photos taken at our new premises in Upper Coomera, Gold Coast, Australia.

01.01.2022 Soft Filleting Wax is back in stock! Elite Composites are proud to be the exclusive Australian distributor of this awesome product.

Related searches