Gfab engineering | Businesses

Click/Tap
to load big map

Gfab engineering

Phone: +61 429 411 222

Reviews

Tags

Click/Tap
to load big map

25.01.2022 Today we finished off @michael_ghobril full custom tray build with custom twin 4inch stainless steel exhaust an dimple die rock sliders. Along with a full length alloy water tank in the head board, and a tool box that houses a bbq gas bottle. This tray was also fitted with a full length under tray draw an flush mount fuel fillers This job was a long one in the making but we are very happy with the end result. We hope he enjoys his one of a kind custom tray#builtbygfab #gfab #gupatrol #customtray #twin4inchsootas #rocksliders

24.01.2022 Out goes another sounder mount today

23.01.2022 Added 60mm into this transom for a better motor hight

19.01.2022 Today we finished@garrett_heenan_landscapes 2500 Dodge Ram custom built rock sliders with dimple die infills with a powdercoat finish #builtbygfab #gfab #rocksliders #ram2500 #custombuilt

19.01.2022 Today we finished off this #quintrexstealthhornet . Fabricating a New heavy duty winch set up. We also raised the boat on the trailer and Gave everything a good ones over check Before the customers big fishing trip.#builtbygfab #gfab #heavyduty #mercurymarine

19.01.2022 Another sounder mount done an ready to go out the door to @techangler #lowrance #humminbird #builtbygfab #gfab

15.01.2022 Today we finished off this #clarkrebel casting deck extension all work was done in house from fabrication and trim came up a treat

11.01.2022 We have just finished off this quintrex stealth hornet . The rod locker was far to short and tight for the larger rods so we have cut the internal wall of the rod locker out and fabricated a alloy extension onto the road locker with marine carpet inside to help let them large rods fit in with ease #builtbygfab #quintrex #yamahavmax #quintrexstealthhornet #gfab

07.01.2022 Today we finished off this #80serieslandcruiser brush bars and rock sliders with black powdercoat #builtbygfab #gfab #rocksliders #toyota #landcruiser

05.01.2022 Fresh batch of sounder mounts welded an ready for powdercoat put your name down for one while they are in (CAN POST AUS WIDE)

02.01.2022 Today we finished off this quintrex 400 hornet trophy . We made a custom 40litre 3mm alloy under floor fule tank with a sender unit for fule gauge and added a water separating fuel filter . We have located the filling point in the top of the gunnel rail came up a treat

02.01.2022 Today we have just finished off @baitrlgn boat welding some old holes up and repainting the area . Then fitting one of our sounder mounts and fitting a cup holder into the floor

Gfab engineering | Businesses