Gold Coast Cork and Timber | Businesses

Gold Coast Cork and Timber

Phone: +61 411 837 103

Add/Update information

Reviews

Tags

• Businesses
• Local service
• Business service

25.01.2022 110m2 of ironbark. Old poly is gone. 1st coat of fiddes hwo satin going down

25.01.2022 Back at our clear island waters job getting a head start for next week. Level sanded and filled. Timber is spotted gum. Will be applying a satin hard wax oil

24.01.2022 First job done. Will dry a satin finish.

24.01.2022 Cypress pine with some old poly. Sanded and fiddes nitro dark oak with two coats of 2 pac water based coating over the top.

24.01.2022 Finished off this deck today. 3 coats intergrain ultradeck

23.01.2022 Tassy Blackwood floor. Old yellow water based coating removed. 50/50 teak brown stain and 1 coat evo hard wax oil down. Final coat going down tomorrow. Matte finish.

23.01.2022 Satin finish fiddes hard wax oil

23.01.2022 Open tread steps today. Fiddes hwo satin finish.

22.01.2022 Spotted gum install complete. Back in a few weeks to sand and coat.

21.01.2022 Sealer and 1st coat of gloss poly down on our Southport job.

21.01.2022 Some blackbutt flooring getting a refurb. Old coating was a water based that was really yellow urethane watercote was the choice of coating for this one.

19.01.2022 Old mixed hardwood floor and steps. Sand and 3 of coats #Urethanecoatings polyurethane. Semi gloss finish.

17.01.2022 Final coat down on our spotted gum job. Fiddes hard wax oil. Will dry a satin finish

17.01.2022 Japanese themed room. Hidden table and seats under mats. All electric press of a button and floor drops down and table appears that we laid in same flooring

17.01.2022 Installing 3 bedrooms to join up to the hallways we installed 18 months ago. Tassy oak flooring.

15.01.2022 Urethane watercote 2 pac satin finish over a tassy oak t&g floor. Full urethane coat system. Sealer and two coats watercote.

14.01.2022 Couple of passes with the Bona power drive and this will be ready for coating.

14.01.2022 Level sanded and samples down. Fiddes nitro and water stains

14.01.2022 It’s a scratch and mark removal kind of day

13.01.2022 A few picks of the 250m2 and 40 step job we just completed with @juan__carlos_angulo fiddes hwo satin.

13.01.2022 Rosewood transformation. Black japan with fiddes hwo Matt finish completed with @juan__carlos_angulo

12.01.2022 Blackbutt floor. Water based removed and fiddes hwo down.

12.01.2022 Tassy oak bedrooms done. Back in a bit to sand and coat.

11.01.2022 Final coat. Fiddes hwo silk finish.

10.01.2022 Office resand this afternoon. Had a worn out area from a chair. Sealer and 1st coat urethane gloss hs50 today. Back tomorrow to buff it back and apply the satin finish

09.01.2022 Back to my Mainbeach job today to stain and coat the handrail. Poor floor is getting trashed

09.01.2022 Final coat down. Fiddes hwo satin

08.01.2022 Gave this hard wax oil a go this week. Quite impressed with the build and how the 1st coat went down. Satin finish over an engineered big river blackbutt

08.01.2022 First week back on the tools. Starting with this shitter. Repairs, punching and it’s never been sanded. Should turn out ok.

07.01.2022 Just under 200m2 done and dusted for @newnhamconstruction

07.01.2022 Urethane 2 pac water based. Rolled out nicely. Slightly thicker product. No lap lines or stoppies after the 1st top coat. Will definitely be using again and recommend

06.01.2022 Spotted gum with the 1st coat of fiddes hwo

05.01.2022 Finally getting some m2 down. 85x19mm spotted gum flooring over ply.

04.01.2022 Blackbutt floor with a bleach stain aka cat wiz. Full sand and 3 coats.

03.01.2022 First coat of Fiddes Hwo down on this spotted gum floor.

02.01.2022 Finishing off this week with a fun one. 100 m2 with black stain to remove. Cupboards had direct stick carpet. Upstairs never been sanded. Hardest parts have beed completed.

01.01.2022 Cork re sand today