GS AUTO WORKS in Perth, Western Australia | Automotive, aircraft & boat

GS AUTO WORKS

Locality: Perth, Western Australia

Phone: +61 466 365 305

Address: Unit 21, 86 Beechboro Rd South 6053 Perth, WA, Australia

Website:

Likes: 2976

Add/Update information

Reviews

Tags

• Automotive, aircraft & boat
• Automotive repair centre
• Vehicle parts store
• Vehicle customisation shop

24.01.2022 Another exhaust done and dusted on a customers r34 gtt. Modified dump pipe and added a screamer plum back 3 stainless cat back with step up to 4

23.01.2022 Got to love building something a little different!! Customer requested a longer screamer with a dump tip on the end. We also modified an old exhaust system and fitted that to the car. We replaced a wastegate spring, added a 3 bar map sensor and fitted a better clutch. Time for some boost and see what this RB25 can do! #nissan #skyline #r34 #gtt #sedan #4door #rb25det #turbo #jdm #boost #garrett #screamer #haltech #directclutch #gsautoworksau @ GS AUTO WORKS

23.01.2022 Looking for a new muffler in your new exhaust?? Next customer to book in their exhaust system including a Reaper Engineering muffler will get a free GS AUTO WORKS t-shirt!!!

23.01.2022 Another 350z in the shop this week for a whole heap of @gktech_official parts including front lock kit, front upper arms, front lower arms, rack spacers, rear dual caliper, hydro handbrake setup and solid diff bushes. We also removed the diff and added some shims to tighten up the factory lsd. Will be interesting to see how this one goes with a little extra hp thanks to a small super charger in the engine bay. #nissan #350z #drift #lock #gktech #haltech #bcracing #gsautoworksau

22.01.2022 Managed to get a tonne of work done on the R32 gtr project this week!! Intercooler pipes done and ready for paint, intake done, dump pipe started, power steering sorted, intercooler mounted, radiator fitted and have started on the fuel lines. #nissan #skyline #gtr #rb26dett #rb26det #turbo #garrett #jdm #godzilla #gsautoworksau @oktaytrz

22.01.2022 A pair of cobra kit car side pipes wrapped in titanium heat wrap from @luxe_performance #cobra #kitcar #v8 #sidepipes #titanium #wrap #heat #gsautoworksau @ GS AUTO WORKS

21.01.2022 Great price for the best RB coil kits on the market!! We use and recommend the 5-0 ignite kits at GS AUTO WORKS.

21.01.2022 Light vehicle mechanic required for small workshop in Bayswater.

20.01.2022 R34 gtt in for a few mods: Brand new 6boost exhaust manifold New exhaust studs and exhaust gasket 50mm turbosmart wastegate with screamer... Custom wastegate lines Dump pipe modified Replaced coolant, engine oil, oil filter, spark plugs and a auto trans service We also replaced the oil and water lines to the turbo, the oil feed was damaged and crimped, the oil drain was slightly closed over with silicone and oil build up and the water lines were running across the top of the engine and leaking coolant into the spark plug holes.

20.01.2022 Its like a jdm car meet everyday at the workshop lately. Plenty of 90s jap cars coming and going. #nissan #honda #rb26dett #perthjdm #turbo #boost #perth #spraytek #gsautoworksau

20.01.2022 Finished up this 3 stainless exhaust for a 13b fc rx7. The customer supplied a pair of @aes.racing.mufflers and we did the rest. These things sound great and really took a lot of noise out of this exhaust system which is what we were after as the car will be going through engineering. #mazda #rx7 #13b #turbo #port #haltech #boost #tig #exhaust #fab #rotor #rotary #aesracingmuffler #dumptip #jdm #streetcar #gsautoworksau @ GS AUTO WORKS

20.01.2022 Heres a quick video of the 13b FC RX7 through a 3 exhaust and 2 x AES Racing Mufflers.

18.01.2022 Another intercooler pipe setup done and dusted. Stainless 2.5 intercooler pipes 2 screamer pipe 50mm Eastgate flange welded to exh manifold... Custom oil and water lines See more

18.01.2022 1 more before and after to wrap up 2020!!! R32 GTR from a bare engine bay to built RB26 with gtx3582, cams, Haltech ecu, custom exhaust and cooler pipes, pwr radiator and a whole heap of supporting mods. Will be good to this on E85 and full boost!! ... What sort of power do you think it will make?? #nissan #skyline #gtr #godzilla #ogjdm #nismo #rb26dett #rb26det #singleforthewin #screamer #jdm #garrett #haltech #pwr #6boost #turbosmart #frenchys #tomei #gsautoworks

18.01.2022 Weve used one of these HKS exhausts before on a r33 gtst and they sound great so we ordered another for a customers car. These exhaust arent over the top loud but they flow great and have a really nice note. Cant wait to get the rest fitted up and see how it sounds.

18.01.2022 Quick little in car video at @drift1wa jacks hill morning session. New box in and feeling great. #nissan #skyline #r34 #gtt #sedan #rb25det #turbo #d1wa #jackshill #drift #gsautoworksau

14.01.2022 From a Skyline to a stagea then onto a BMW M3, its been a busy week on the tig!! We fabricated a custom twin 2.5 mid section with x pipe and magnaflow muffler for this M3. We also added a couple of flex bellows to help with fitment and v bands at the rear so we can switch it back to the standard exhaust when needed.

13.01.2022 Everyone loves a R34 gtr dont they?? Even more so with a gtx turbo, 3.5 exhaust and a 2 screamer!!! Can’t wait to see this one all fitted up and running!! #nissan #skyline #gtr #rb26dett #rb26 #turbo #gtx #jdm #godzilla #garrett #6boost #turbosmarthq #haltech #perthjdm #streetcar #dreamcar #perth #bendbrothers #gsautoworksau

13.01.2022 Have you got a SR20??? This is definitely worth a read then!!! Enter to win yourself a 5-0 ignite SR20 cam trigger kit!!

13.01.2022 So you think blow off valves are only there to save your turbo?? Heres a throttle blade from a Rb25det that runs a rb26 6 throttle intake. This is the result of 27 psi of boost and no blow off valve. Resulting in a 2000 rpm idle.

13.01.2022 @oktaytrz RB26 starting to shape. Built engine, gtx3582, 6boost exhaust manifold, tomei cams and engine management by haltech. #gsautoworksau #rb26 #garrett #turbo #singleturbo #perthjdm #gtr @ GS AUTO WORKS

12.01.2022 Sunday session done and dusted. 350z in for a set of solid diff bushes. We also disassembled the diff and added a small shim to tighten the diff up as it will be used for drifting. Weve done a few of these lately including lock kits, upper and lower lcas, coilovers and dual caliper hydro kits. ... Are these going to replace the skyline and silvia as a base for a drift car????

11.01.2022 Heres one for the Stagea fans! Custom stainless 2.5 intercooler pipes with new silicone joiners and clamps, custom 3 stainless intake, air flow meter delete, new pod filter, plumb back factory bov and plumb the rocker cover breathers in. We also gave the intercooler a quick lick of paint as well as the timing cover. Next step is a check up on the dyno. #nissan #rb25det #stagea #turbo #haltech #japan #jap #wagon #jdmwagon #street #circuit #stainless #tig #fab #intercooler #tidyup #gsautoworksau @ GS AUTO WORKS

10.01.2022 Support your local wa business!!! Need any 5-0 ignite products for your next build? Pick up and install is available at GS AUTO WORKS!!

10.01.2022 We sent the s13 RB25det neo conversion back to its owner today!! The car turned up with no engine or gearbox. We fit a RB25det neo, RB25 turbo gearbox, completely re wired to suit the new engine, custom mounted alloy radiator with fans, custom exhaust and intercooler pipes, custom mounted intercooler, custom tail shaft, forward facing plenum, new fuel injectors and fuel lines, aftermarket ecu and sent the car off for dyno tuning. Weve also built the car to suit engineering ...as the customer wanted to get it legal straight away. All the hard work has payed off and its moments like this that make it all worth while!

08.01.2022 Another Zed at the shop this week. Oil change, check over, front brake pads and disc machine.

07.01.2022 Super clean Toyota Supra in today for a Direct Clutch twin plate. We also fitted a pull to push conversion to suit the new clutch!

07.01.2022 Whos purchased a haltech ic7 for a project and hasnt installed it yet?? Weve ordered one for the r34 and back order will be tight for power cruise. If anyone has one that I can buy/borrow that would be great!

07.01.2022 As well as an ecu upgrade we decided to upgrade the ignition system too with a set of R35 gtr coil packs, loom and bracket from 5-0 Ignite. Weve sold a few of these sets now so its great to be trying a set for ourselves. Not only are they genuine gtr coil packs but they actually fit and seal around the spark plugs. ... Best kit on the market in our opinion!!

07.01.2022 So weve decided to take the r34 to Powercruise Promotions this year! Who else is entering? Who wants a lap in the R34???

07.01.2022 We had this ceffy back for a few more repairs. Lowered and adjusted the suspension arms to suit the new wheels, rolled guards to suit 2 new tyres for the VSKFs... Removed the intake manifold and replaced all of the heater hoses with genuine items New timing belt, seals, water pump and replaced a leaking welsh plug Few more small repairs and it will be ready to hit the road!! Ps. How cool do vskfs look on 90s jap sedans!!!

05.01.2022 Just a little bit of race car prep going on over the last few weeks. Evo 3 from Spraytek in for a brake check, fluid flush and bleed R32 Gtst in for wiring, suspension work, fuel system, bonnet fitted, catch can, oil cooler and a heap of small jobs... Our r34 in for a check over, gearbox swap and oil change Another r32 in for a compression and leak down test

05.01.2022 We had this monster of a GU patrol in for some preventative chassis strengthening. Full side weld on plates, coil tower weld on braces and bolt on coil tower brace. Should be good for a few more years now!!

05.01.2022 So 2020 ended up being a massive year at GS AUTO WORKS. With heaps of exciting jobs done and out the door this year we can’t wait to see what builds 2021 brings! We have some big changes happening next year and can’t wait to see how it all pans out! ... What’s your favourite build from 2020? What’s everyone’s plans for their car for 2021? Merry Christmas and a Happy New Year to all!

03.01.2022 Heres one for the Ford and Holden fans, not sure who will be more upset though! Barra swapped VS vacationer sedan!!! We mounted the intercooler, welded a 90 deg elbow to the turbo outlet, fabricated some 3 stainless intercooler pipes and modified the radiator to suit. ... Will be a super cool sleeper when its all done!

03.01.2022 This R33 Gtst got a bit of a suspension makeover. New BC Racing Australia coilovers New HARDRACE castor rods Replaced upper inner bushes... After fitting some new tyres and a wheel alignment we got this R33 driving and handling like it should.

03.01.2022 Before and after fitting some @bcracingaus coilovers. We also replaced the worn castor rod bushes and gave this r34 a wheel alignment. #nissan #r34 #gtt #sedan #streetcar #bcracing #coilovers #rb25det #gsautoworksau

03.01.2022 Soo many good shots from last weekend at jacks hill!!

03.01.2022 S15 silvia in for a fog light install. Customer supplied a pair of oem fog lights. We had to mount them to the fibreglass bumper and wired them up to that factory switch to give it that oem look. ... Its not all rbs and skylines at GS AUTO WORKS.

03.01.2022 Cant wait to here this one on full noise!!! 3 turbo back stainless steel exhaust Bonnet exit screamer pipe Custom 3 stainless intercooler pipes

02.01.2022 How good are these pics from @blithephotog of the r34 at jacks hill! Cant wait to get back there a kill some more tyres. #nissan #skyline #r34 #drift #rb25det #garrett #tial #tomei #gktech #gtr #ppg #dogbox #directclutch #4door #sedan #jdm #bcl #bigwang #screamer #perth #jackshill #barbs #gsautoworksau @ GS AUTO WORKS

02.01.2022 We’re about to place an order for some GS AUTO WORKS T-shirts’. Available in sizes from kids up to adults! Shirts are black with white writing front and back. As colour brand so they’re good quality. ... $30 each. Please pm the page so I can keep track of orders. Thanks!!

02.01.2022 Havent seen one of these #turbosmart 48mm wastegates in a while! They have definitely come along way and are now half the size. Still managed to track down a flange to weld to this #6boost manifold for a customers r33 gtst. Finally got to crank up my new unimig welder and give the fupa cup a whirl. #nissan #skyline #rb25det #turbo #boost #jdm #perthjdm #streetcar #oldschoolgate #screamer #tig #weld #fab #fupa12 #gsautoworksau

01.01.2022 How good was the 90s for jdm cars!!! R32 gtr and GTi-R pulsar hanging out together at the shop this week! #nissan #gtr #gtir #rb26dett #sr20det #turbo #90sjdm #perthjdm #pulsarturbo #pulsar #skylineturbo #skyline #gsautoworksau

01.01.2022 We had this gtir in for a few small repairs, oil change, set of plugs, Haltech Elite 1500, haltech boost control solenoid and a set of 1000cc injectors. Dyno is booked for a few weeks so will be good to see what we can make from the standard setup.

01.01.2022 More Nissan wiring fun today!! R34 gtt running a little too low and caused some serious damage to the loom resulting in the reverse lights being stuck on. Always a good idea to tuck the loom up as high as possible when running big wheels and a low ride height.

01.01.2022 I hope people dont start asking for 5 dump pipes because trying to squeeze a 4 one in an engine bay is hard work!! Custom stainless 4 dump with expander flange off the turbo, @bendbrothers 4 Flexi down to a 3.5 v band to suit the current cat. Next step is to do a plumb back section for the 50mm gate. #nissan #cefiro #rb26dett #g35 #garrett #turbo #sleeper #jdmtaxi #90sjdm #perthjdm #rbpower #turbo #gsautoworksau

01.01.2022 Got to love a set of na stainless steel headers!!! AE86 in for a set of headers, exhaust fit up and a set of bc racing coilovers. We also replaced a heap of bushes, ball joints, steering arms and wheel bearings. ... #toyota #ae86 #trueno #sprinter #4age #na #streetcar #ultimatejdm #jdm #hachirocku #86 #gsautoworksau