Ironstar Engineering in Burleigh Heads, Queensland | Engineering service

Ironstar Engineering

Locality: Burleigh Heads, Queensland

Phone: +61 7 5593 6834

Address: 22 Junction Rd 4220 Burleigh Heads, QLD, Australia

Website: http://www.ironstarengineering.com.au/

Likes: 27

Add/Update information

Reviews

Tags

• Engineering service

25.01.2022 Hot dipped galvanised trailer chassis we fabricated for a client who is building a mobile food van.

22.01.2022 This is a stainless steel fan we have fabricated and machined for a large air blower. It is 1170mm long x 670mm in diameter and was balanced to ISO 1940-1:2003 G6.3 Australian standard after machining.

21.01.2022 Starting to assemble the rear end of the Barracuda Buggy. So far so good :)

21.01.2022 Out with the old, in with the new. Auger drive that we completely manufactured from scratch for Visy Recycling.

18.01.2022 A little more progress on the Barracuda buggy. Rear drive assembly parts water jet cut on our in-house water jet cutting machine. All parts assembled and welded into rear of frame.

18.01.2022 Back on the Barracuda, made all of the parts for the rear drive and starting to assemble.

17.01.2022 6mm thick stainless steel disk rotor cut on our water jet cutter for a single seat off road buggy we are building.

15.01.2022 Machining keyways in conveyor drive pulleys that we manufactured for Visy Recycling Plant.

14.01.2022 A full steel entrance staircase that we have fabricated for a beach home in Fingal Head, Nothern NSW. We fabricated it in modules, had it all hot dipped galvanised and the treads were silver gum Modwood. Scroll through for start to finish photos.

14.01.2022 Getting very close to having the front end completed.

14.01.2022 Fabricated rear custom wheels for the Barracuda.

11.01.2022 This is a patrol trailer for Kurrawa Surf Life Saving Club. It is a full aluminum trailer and is 1 of 4 we have fabricated. We are about to start another one for a local surf club. Keep an eye out for progress photos.

08.01.2022 This is a steel fabricated concrete swimming pool mould we manufactured for Australian Plunge Pools. These pools are then poured, tiled and delivered to sight finished.

07.01.2022 This is our hydraulic beam straightening press. At Ironstar Engineering, we straighten all of our beams after welding and galvanising, so when they turn up to site, we have a perfectly straight beam.

07.01.2022 2 fabricated aluminium skateboard racks. These racks get bolted to a wall. Skateboards hang and can be padlocked for security. These were made for Kingscliff High School.

07.01.2022 Setting up and machining another tail drum for a local quarry conveyor.

07.01.2022 A little more progress on the Barracuda buggy frame.

06.01.2022 Taking on the task of fabricating a Barracuda single seat off road buggy. We purchased a full set of workshop drawings from a WA company who built this one. So far so good!

04.01.2022 Getting the rear suspension and drive hubs machined and fabricated for the Barracuda Buggy.

04.01.2022 Excavator idler wheel machined from solid shaft, 400mm in diameter.

02.01.2022 Starting to machine rear wheel drive hubs for the Barracuda Buggy