Jettco Developments in Warrnambool, Victoria | Automotive repair centre

Jettco Developments

Locality: Warrnambool, Victoria

Phone: +61 409 501 192

Address: 10602 Princes Highway 3280 Warrnambool, VIC, Australia

Website: http://www.jettco.com.au

Likes: 2460

Add/Update information

Reviews

Tags

• Automotive, aircraft & boat
• Automotive repair centre

25.01.2022 $450usd the nicest R6R billet sump on the planet IMO! #jettcodevelopments #jettcor6r

24.01.2022 We were stoked to hear that Parker Johnson started his season off with a win last weekend running our R6R & GEN2EFI combination.

23.01.2022 Good luck Digger

22.01.2022 Pumped to see Ryan bounce back after a couple of tough nights. Jettco R6R & GEN2EFI

21.01.2022 This is the stock Yamaha ECU’s electronic version of Donny Schatz and company’s ability to control the throttle, it makes motors in a very unhappy part of the rev range bearable, but it comes at the cost of feel, as shown in the video, with drive by wire you have no direct connection to the throttle, it’s all driven electronically through the ECU.

19.01.2022 We're having some great runs with our R6R's and GEN2 EFI at the moment, Josh Pokarier has now had 3 wins and a 2nd from 4 starts

19.01.2022 It looks like everyone had a great night for the opening of the southern Queensland season at Toowoomba last weekend. It was probably no surprise Liam ran away and hid again, however the race for 2-3-4 and 5 was really good. Ultimately Brady Argles drove a great race around the bottom to finish 2nd, Kristin Brown ran the top (with no RF torsion arm) and was a really strong 3rd, Rookie Ryan Newton was super impressive after starting rear all night to run home 4th and Tarhlea Apelt rounded out the top 5. That gave us a GEN2.1 1-2-3-4 and a GEN2.0 in 5th. On top of that Liam smashed the record with one of R6R’s turning laps in the 11 second bracket.

18.01.2022 Did you know? In early 2018 Danny Carroll from Sacramento CA became the first guy in America to run our GEN2 EFI, he won races and a track championship that year on a bone stock 599 straight from a crashed bikeand it’s never been near a dyno for tuning, and never once had an EFI issue.

17.01.2022 Great work from the Chris and Blake in the CMP house cars, pumped to to hear that at nearly the end of their second season they’ve had zero issues with our GEN2 EFI, and on top of that neither have had a tune update or ever seen a dyno

17.01.2022 This is our new R6R A class EFI, just like our GEN2 it’s very light, very simple and takes up no more room than a set of carbs, the main difference is it runs the stock Yamaha coil, this should make it legal everywhere with a stock coil rule. We’re looking at supply it with either our data logging type ECU or a very simple non logging system, we hope to be able to have them delivered to your door race ready for somewhere between $2600 and $3000USD. The results shown below wer...e recorded on our bone stock 2007 dyno motor and the comparison was made against our carb and ignition combination. For further information please contact me on [email protected] or here on FB Thanks Steve PS. For places like Deming and some others our Outlaw spec GEN2 is available to run the stock coil also PPS. For our Australian customers this is an update or our GEN1.5 system we've been running for the last 5 years. See more

16.01.2022 As I’ve mentioned before we’ve been working hard on a upgrade for our existing customers that gives a higher torque and more forgiving injector spec and tune up. We’ve wound up with 2 options both include a new throttle cable drum for a little more feel right off closed throttle, and both include a new set of ram tubes to suit the Walker carb style air cleaner, labour and return post, however Kit A also includes a new set of runners as well. The comparison I’ve included shows... a motor with last years tune and hardware, it’s a little down on peak torque compared to when it left here the first time but it’s also done a seasons work, including some wins. I simply hooked up and ran this motor as it has been running, then went in changed the injection assembly, loaded the new tune and went again, there wouldn’t have been 15 minutes between test’s or 10f difference in temps. After 500 plus litres of fuel I’m really happy with the gains, I’m sure I’ll flatten out the top end a little more as well, these numbers were also recorded with stock set of schoenfeld headers. Kit A: $1500 Kit B: $800 The video just shows our poor little 2006 dyno motor500liters is a lot of fuel when you’re doing this all day!

16.01.2022 For those that have been waiting we finally have our MyChron Tach drivers to suit GEN2EFI back in stock, please contact me if I’ve forgotten to send yours out...

15.01.2022 Great to see Taylor Morgan get herself another win in the junior class at Brisbane last week too. Jettco R6R

14.01.2022 Liam had another win up at Brisbane last weekend. Jettco R6R & GEN2EFI

14.01.2022 That’s the most impressive thing I think I’ve seen on Facebook in years, I could swear they’re floating on air

14.01.2022 I'm about to do some video's about Jettco and specifically our GEN2 EFI and oil pan for those that have been contacting us recently from the USA. Please jump on our website (jettco.com.au) and have a look through it, if you have any specific questions we haven't answered on there please contact me on [email protected] i'll I'll try and get them answered :) Thanks Steve

11.01.2022 It was great to see Josh Pokarier carry the flag at Maryborough last weekend, Josh has been a great supporter of our EFI since day one. Well done also to everyone at DavKat for their huge effort fielding and presenting their cars the way they do #jettcodevelopments #jettcor6r #gen2efi #600microsprint #microsprint600 #microsprintracing #jettcoefi #600sprints #walkerperformancefiltration #linkecu #pmpchassis

11.01.2022 We now have our replacement close ratio 4th gear back in stock to suit the 2006-2020 R6R Yamaha , these allow you to gear for the bottom in 3rd and if you have to move to the top, you can shift into our 4th and it's the equivalent to taking a 1.25 teeth off the back or dropping around 350-400rpm. We've been using the same gears now for 10 years and have never had one failure or set wear out yet. These would be great in any rpm limited class's that requires a full gearbox, and any serious Outlaw build :) $520USD delivered to your door or $722 plus GST Thanks Steve

10.01.2022 Getting closer After basically having the whole year off, Dan Mognaga with his GEN2.1 ran second last week first night out. This week he went quick time at Delta CA and was running a comfortable 3rd in a tough field until they had some trouble with the bottom end a few laps from home.

10.01.2022 Our Big Bang R6R, for those that never heard it run at Laang, these cams and our GEN2 EFI would make an awesome non wing combination

06.01.2022 What an awesome night this was In the last couple of years there’s only been 2 Jettco built and dynoed motors compete in Cali, both had limited runs but both got wins on them!

06.01.2022 If you're in the market for a new EFI kit and you think you might run better with a little more torque and in most cases a much wider power band please have a look at our video's and get in touch with us directly or have your favorite engine builder contact us. If you would like to hear from a some of our US or Australian based customers already using GEN2 please contact me either here or at: [email protected] So we’ve done a couple of video’s to introduce and explain what our GEN2 EFI is, the first video is a basic introduction, the second is a more detailed version, so if you have any interest at all please put a side a few minutes and check out our videos on YouTube at Jettco Developments. Thanks Steve Thanks to Bret at Bret Trigg Visual for the great filming and editing https://youtu.be/sYono24Iqvo

06.01.2022 We have made a few small changes to our carb and mechanical injection harness’s, they’re just a little tidier again. If yours is getting little ragged looking we have these in stock ready to go Harness only: $275AUD or $175USD delivered to your door Harness & ECU ready to run for Yamaha, Suzuki, Kawasaki or Honda $620AUD or $395USD delivered.

05.01.2022 What a solid run from Smith Bros Racing, their win last weekend made it 10 wins from 10 starts and Jettco is pumped to be a part of it #jettcoInjection #jettcoR1 #jettco #jettcoefi

05.01.2022 After switching to our GEN2 EFI Kaydon Iverson has a had pretty solid run too, starting last year with winning his first 600 speedweek title using one of R6R's and GEN2, this year he's also had 3 wins from 3 starts and he dropped out while leading the 4th race.

05.01.2022 2 great looking Swift Chassis cars running our Suzuki GEN2EFI from Jesse and Dean Ellston. Thanks to Corey Gibson Photography for the image

04.01.2022 Great to see Scott get his first win for the season last week. Jettco R6R & GEN2EFI

04.01.2022 Did you know? Austin Stone won the prelim feature of the Cal Cup at Lemoore CA on the weekend, by doing that he became the first American to win on both our carbs and our GEN2EFI. #jettcoefi #gen2efi #600microsprint #microsprintracing #pacechassisusa #walkerperformancefilteration #linkecu #serosraceengines PS. Solid effort in a stout 34 car field and running a 599.

04.01.2022 I forgot to attach these to the post below..

03.01.2022 3 generations of Davis - Jonsson family were involved in getting Brodie over the line at Mareeba with their Kawasaki and GEN2EFI, well done to all involved with the #39