Australia Free Web Directory

JH Mobile Welding And Fabrication | Local service



Click/Tap
to load big map

JH Mobile Welding And Fabrication

Phone: +61 488 144 646



Reviews

Add review



Tags

Click/Tap
to load big map

24.01.2022 Back living the dream



24.01.2022 4" food grade purged stainless line

22.01.2022 Start of a few stainless handrails for the week

21.01.2022 Pump site near completion. Roof and engine install to go



21.01.2022 350mm tube chute fabrication and install

19.01.2022 Telehandler repair. Unfortunately this machine managed to snap one of the tilt hitch pins. These are 50mm thick. Tilt assembly had to be removed and bosses welded then machined to correct size for new brass bushes and new 4140 pin. Left side of arm also needed to be removed and re-fabricated from damage caused by broken pin

08.01.2022 Vertical wood stands made to order. These are designed for houses with limited floor space. With these you can stack your wood vertically unlike the traditional wood boxes that can take up alot of room. Very heavy duty, guaranteed to not de-form or break from use.... Can customise designs if your after something fancier. Example: Decorative twisting, loops etc. This standard one shown is $385. It holds two wheelbarrows full of wood, it is made from 40mm x 10mm flat bar with a 3mm base and powdercoated matt black.



06.01.2022 New years eve lip and teeth replacement

06.01.2022 100mm dozer pin removal today. Got a call to remove this pin that had been stuck for nearly 5 days, with a few goes of lancing it out then pressing. I lanced the rest of the way through the pin and took alot more material out this morning to shrink the pin, set up the enerpac and it was out in 4 hours.

04.01.2022 Steam pipe modification. Putting pressure ticket 7 to use.

04.01.2022 Before and after bobcat blade

01.01.2022 Spent the week back at Tafe doing another pressure ticket. 9 years ago I passed 3E and today added number 7 to the list. For those wondering, the picture is of the destructive weld tests that test the weld strengths and open the welds up to check for any impurities inside. Likely a fail if any are found.



Related searches