Kemps Creek Motorsport in Sydney, Australia | Motor vehicle company

Kemps Creek Motorsport

Locality: Sydney, Australia

Phone: +61 402 501 905

Address: Elizabeth drive kemps creek 2178 Sydney, NSW, Australia

Website:

Likes: 814

Add/Update information

Reviews

Tags

• Automotive, aircraft & boat
• Motor vehicle company

25.01.2022 13b Bridgeport built. This is going in a datsun.

25.01.2022 I don't know what to tell you about this car. I don't know how the fuck cars end up like this. Its a 13bpp on e85 with L10c How do I start on this? rip it all off repair the factory loom get that working properly then add the microtech back in. Will update when its finished

24.01.2022 Chris's beautifull rx3 tuned making a healthy 346hp. Engine by morad at m&j mobile mechanic. This needed a few things to make it nice and smooth. The 044 was noisy so I removed it and put a walbro 460. Injectors serviced. New bosch coils. Alternator was charging at 13.5 now 14.1. The blocked fuel filter was great and a catch can fitted. I wish chris the best I complement him on how nice and quiet it drives. no rattles or funny noises it was a pleasure.

24.01.2022 Datsun 180b getting a rotary conversion

23.01.2022 Came with points dizzy and left with electronic.

22.01.2022 Sam's r100 came in as a no start. I done a compression test that was positive. While cranking it was very slow 180 rpm noticed the earth wire was shit so I replaced it with a good one now it's at 270 rpm. The ignition system was good so I went staright straight to the fuel system. I removed the carby pulled it apart gave it a good clean.years of this car sitting around showed. Took a long time to get it running but once it was running timing check showed it was way to advanced. Adjusted the timing to less than half of what it was. Now runs starts and runs good. Quick dyno run shows the afr is in the right place. And I makes a massive 60hp.

22.01.2022 3.5 inch exhaust with aes mufflers done with a plumb back screamer pipe.

21.01.2022 Finished off at 218hp

21.01.2022 The latest addition to the family. Injected 13b Bridgeport with quad throttle bodies. This is going to be a fun car.

20.01.2022 Replaced a steering box on a rx7 series 2. The exhaust manifold had to be removed i thought let me check how flat this surface is, as expected it wasent.

19.01.2022 Brendan's fd rx7 has got its run in tune done. It's a beautifull car and has a one of a kind engine bay. The car came in with engine in and the fabrication done. One of the first things I noticed was the electric water pump. The side mount alternator was not an option as it hits the chassis and cant adjust the belt. So I got a billet boss alternator bracket kit and fitted that and the filler neck had to be modified to suit to clear the alternator. My next problem was getting ...the belt on as the alternator and crank offset didnt line up. I got a full function engineering FC trigger kit and modified the bracket to suit the fd timing cover. Next was the haltech platinum 1000 ecu wired in with fuel pressure, oil pressure and temp sensors fitted and wideband. The factory car harness had been damaged from the driver front wheel so that had to be pulled apart and repaired. The factory dash had the circuitry fried so I installed a microtech dash and had the cluster modified and painted satin black to give it a factory look. The battery mounted in the boot with new cables and an isolater switch. The fuel system was fully replaced with teflon braid hoses to suit e85 with a cj motorsport fuel pump hanger with staged twin 460 walbros. The raceworks fuel rail came with the car but will be replaced once back for the full tune. The gearbox was locked so it had to be removed and sent away to get repaired and refit. Once it was all together anthony had the pleasure of doing the tune. See more

19.01.2022 Johnny's fc rx7 remount intercooler as he wants to put the factory front bar on without it chopped up. Battery remount in the boot with isolator switch, power and grounds all redone. The fan was zip tied on and loose that had to be remounted. Fuel regulator was noisy had to be replaced. Oil cooler lines replaced. Just went over the engine bay and tied up. Car went on the dyno for a health check made 335hp on 9 psi. The afr are in safe range no need for adjustment. Takes the car 5pm friday rings me 12pm saturday blew the diff lol.

18.01.2022 Time to put this back together

18.01.2022 We took Mike's car to wakefield park after mike spent the last few years putting this car together. I was very happy that he enjoyed his day. First time for him on the circuit we didnt get any times we just enjoyed the day. The first session was on 22psi I thought was abit much as I didnt have the logger going. The next 4 sessions were on 18psi and finally got the logger going thanks to jon blanch. The last session at the end of the day Mike's car hit the boost cut on 25psi didnt bother diagnosing we loaded the car up and headed home. I'm pleased the day went well. Dave broadhurst engine still going strong after being about 10 years old. Enjoy the video

17.01.2022 Murad rx4 off the run in tune with his new combo. The goal was 500hp, we got it up to 18psi made a solid 480hp. We turned it up from there and we had to stop as we got a problem. Murad still happy with the result, he will enjoy the car for a awhile before we have to make some changes.

17.01.2022 Rx3 coupe in for engine, gearbox mount, custom exhaust manifold, 3.5 inch exhaust with AES mufflers, mount radiator, oil cooler, intercooler and intercooler piping. I forgot to take photos of the finished job. It was all stripped and sent for coating. Once the car comes back will post photos.

16.01.2022 Main power supply for the microtech on the blue rx7. Straight in the bin.

16.01.2022 Don't limit yourself

15.01.2022 Dusan rx7 came in to redo the intercooler piping, battery relocation, pwr radiator shroud and spal 3000cfm fan, walbro 460 fuel pump, id 1300x fuel injectors, fuel rail kit, microtech lt10s upgraded to a c series so the 3.5 inch dash could be installed, also an e boost street. i successfully remounted the power steering pump to drop it approx 3 inches so that the cooler piping would run over the pump instead of under it. I done this with the factory mount just modified to suit . Back on the dyno the car made the same hp unfortunately the rear turbo housing wouldnt allow more power as its to small. Will be back on once its replaced. In the mean time have fun dusan.

14.01.2022 Jeff's xr6 turbo in for fuel system. Plasmaman surgetank system as well as a fuel rail and turbosmart fuel regulator with braided fuel lines. Valve cover sprayed gloss black and just a few bits and pieces tidied up.

10.01.2022 Anthonys car dyno finished at 440hp unleaded fuel just to start off. Now injector change and e85 and turn the boost up. Haltech nexus done a great job. Wired by stewy tuned by Anthony.

10.01.2022 Mark recently purchased this little mazda 1300. Me and morad built this car at the shop in wetherill Park. Its a 12a turbo with a jatco. Im happy mark brang the car back to me for a going over. On the graph is boost 1 and boost 2 Engine by morad at m&j mobile mechanic tuned by Stewy. Have fun with this mark.

09.01.2022 Kevs freshly painted fc rx7 back on the rollers. Finished at 371hp

09.01.2022 Diagnosing problems can be tricky unless u have the right tools.

09.01.2022 Kris's rx7 series 3 12a turbo to4z 337 on 12.5 psi nice and easy on a 37 degree day Have fun

06.01.2022 The boys at campbelltown auto body done a fantastic job with my engine bay. Highly recommended. Now to put this together without scratching it.

05.01.2022 Dump pipe done on vl turbo.

05.01.2022 Thats us done for the year. Merry Christmas God bless. Ryan's rx4 20b the last car on the dyno this year. It finished at 530hp, there is still more to go on this beast with a few changes. See you all in the new year.

05.01.2022 Brendan's fd dyno time

04.01.2022 I hope I dont have to that again soon.

02.01.2022 Sounds funny in fast forward

02.01.2022 Khouder Mazda r100 in for maintenance. Replace front brakes, machine rear drums adjust handbrake. Replace brake master. Was a pleasure road testing this car. The owner built 12a bridgy goes really well.

01.01.2022 Microtech wire up in a ke 70 corolla with a 5 inch dash, oil and fuel sensors, power and ground done and dusted. Have fun with little beast karl