Kustom Garage Metal Shaping | Businesses

Kustom Garage Metal Shaping

Add/Update information

Reviews

Tags

• Businesses
• Motor vehicle company
• Vehicle, aircraft and boat

25.01.2022 Plotting the measurements on the quarter panel template that was made in the past two weeks. A timber buck is being made next.

24.01.2022 This album is to share and show appreciation to all that support Kustom Garage with our coupe products. Here we will show build shots of cars that are using our parts. If you have pictures of our parts in you coupe build, then send them to us and we will put them up here.

22.01.2022 A before and after shot of the top sections of the quarter tig welded..

14.01.2022 Progress shots of shaping and fitting to the Buck

12.01.2022 Haven't posted for a while, so here is some pics of a Xa coupe quarter I'v been shaping.

12.01.2022 A few more pics showing a sample of techniques we cover. We have a couple activity’s planned for the 3 days but like to keep it open. This way as questions are asked we can jump onto it.

12.01.2022 We did it again, Go to www.allmetalshaping.com to see Jamie featured as this month's metal shaper!

12.01.2022 Big vote of thanks to Jeff Edwards and Jamie from Kustom Garage for all the thought put into the WIDE BODY with Graeme. TUBBED TO THE OUTSIDE. We are on-track.

11.01.2022 XA, XB, XC Coupe Verticle replacement panel this panel fits between the lower parcel shelf panel and the upper windscreen valance panel. $400

09.01.2022 Haven't posted for a while so picking up where we left off

05.01.2022 Complete quarter ready to weld, made in four sections.

03.01.2022 Hey guys, We have been overwhelmed with the amount very positive feedback to the quarter panel. I started Kustom garage after finishing an apprenticeship at Blackart fabrication, where I was trained in the art of metal shaping / coach building on vintage and veteran automobiles. The love of the Falcon coupe and the lack of quality replacement parts inspired me to, in between the normal vintage and custom restorations, also make the replacement parts that you may already be f...amiliar with and have used in your restorations to date. As I have a couple years of work ahead of me and the time it takes to produce a quality product, adding the Quarter to our existing coupe range is a must however will take time to produce them for all in need. The cost per side in four sections will be around the $5,500 mark inc. A part of this size is best fitted to the car it will actually be used on to get the correct fit and then welding the four parts together. It can be supplied welded together and finished at an extra cost. If you're interested to take a look at the quarter we will have it on display with a couple other parts @hotrodandcustomexpo at rose hill in Sydney this weekend at the @melomotive stand

03.01.2022 Jamie at Kustom Garage is making great progress on SHQRP with the buck for the quarters pretty well wrapped up