LS Tuning and Performance Centre in Albury, New South Wales, Australia | Automotive, aircraft & boat

Click/Tap
to load big map

LS Tuning and Performance Centre

Locality: Albury, New South Wales, Australia

Address: 8/32 Fallon Street 2640 Albury, NSW, Australia

Website:

Likes: 8065

Reviews

Tags

Click/Tap
to load big map

25.01.2022 My16 Z71 Colorado in for a custom dyno tune. This one had a chip fitted previously so we gave it a run with the chip installed before removing for a standard comparison. Making the same peak power and torque with small gains down low being the only difference! With our custom tune it gained 120nm of torque and 26kw of power across the range ending up with 600nm and 140rwkw on the 33 tyres. Proper custom ecu mapping for the win #lstuningandperformance #tunedbyls #colorado #holden #z71 #mainlinedyno #dieseltuning #hptuners

25.01.2022 A while back we had completed a stage4 Harrop upgrade to the LSA powered VF Clubby wagon. 483kw wasn’t enough for long so back it came for another round of mods. We had Nathan Higgins port the heads, blower and blower snout. ... We strengthened the intercooler brick, hand ported the throttle body and fitted a Kenne Bell fuel pump booster. Back together and on the dyno for a retune making impressive gains. The crisp cool air today helping inlet temps it ended up making 527kw at the hubs and 900nm of torque. 13psi and 98 pump fuel!

20.01.2022 Jordan brought his JP Performance parts hauler over this afternoon to finish dialling in the boost after recently adding a Killaboost turbo set up. A couple tweaks of the eboost, fuel and timing locked in and the valve spring upgrade only LS1 punches out a staunch 800nm/440kw on 9psi and 900nm/484kw on 12psi. #lstuningandperformance #jpperformance #killerboostmanifolds #turbosmart #s475borg #boostedls1forthewin #mainlineprohub #hptuners

15.01.2022 A Manual FG XR6T Ute in for a power up. We supplied an intercooler kit, high flow cat, ID1000 injectors, and a walbro intank fuel pump. The customer fitted everything bar the injectors himself and added an Antz turbo side intake. Today we fitted the injectors and backed it on to our Mainline roller dyno for a custom tune. 324rwkw and close to 1000nm of torque at the rollers. #lstuningandperformance #tunedbyls #injectordynamics #nizpro #walbro #mainlinedyno #fgxr6turbo #barraturbo #ford

LS Tuning and Performance Centre in Albury, New South Wales, Australia | Automotive, aircraft & boat