Martin Boys Chop Shop | Automotive
Martin Boys Chop Shop
Phone: +61 417 909 851
Reviews
to load big map
25.01.2022 Xy Ute tubs back in. Ready for the rails to go back in this week. Brand new factory tubs got split and widened, raised up. And moved all the inner tub out to get the 295s right up close to the outer quarter any rust repair, resto work give us a call 0417909851
25.01.2022 Made a start on the v8 bike this weekend
24.01.2022 Another one of Daves cars waiting to be finished not much left of the EH body full fabricated chassis/floor/firewall aluminium Donovan sbc halibrand quick change diff and lots of other custom bits #ehholden #halibrandquickchange #willwoodbrakes
24.01.2022 Xy Ute getting there. Floor welded back in. Rails and tubs welded back in place, rear quarters in primer. Ready to start the rear crossmembers and 4 link next week.
24.01.2022 Lx hatchback fresh out of the booth. Painted in a custom candy green over black from house of kolor.
23.01.2022 Quick rear airbag setup this weekend on this xl falcon wagon. Bit more welding then onto the front airbag setup
23.01.2022 Made a start on the 68 camaro firewall
22.01.2022 Rear end all welded up and done now onto raising the tunnel #baggedfalcon #baggedford #xlwagon
22.01.2022 Vj charger finally back off to its owner hopefully see it finished one day.
21.01.2022 Might be a new plan for shirts and hoodys will keep you posted
21.01.2022 Another xy falcon in this week for rust repairs panel and paint. New outer sills, new door skins, and radiator support panel.
20.01.2022 Hq Holden Ute chassis we done last week. Parallel 4 link, coilovers and 9 diff fitted. Tail shaft loop and finish shortening the diff in the jig next week then paint.
20.01.2022 Vl Calais engine bay done.
20.01.2022 Tony’s 55 Oldsmobile chassis coming together. Shockwaves mounted all round and billet specialties front drive bolted up
19.01.2022 Mazda rx2 painted this week back to a factory colour
18.01.2022 Got the dodge polara painted this week. Just needs diff and assembly
17.01.2022 Got the roof painted on the dodge polara yesterday
16.01.2022 Xw Fairmont ready for final assembly
16.01.2022 Xb coupe we done a heap of work on couple years ago finally back to fit up windows etc
16.01.2022 Tonys f100 back from the auto sparky. Quick cut and buff before the final assembly. 4 link rear end, custom front suspension grafted into the factory chassis,quadcam v8 out of late model falcon, all engineered and finished off in two tone house of kolor paint
15.01.2022 Boot floor made up today for the 55 Oldsmobile project
15.01.2022 Xy Ute floor and rear pan almost done. Engine bay got tidied up with some Aeroflow hinges.
15.01.2022 Change of plan with the merch teamed up with @el_locothreads shirts and hoodies are now available through them click the link in bio have to get a minimum of 20 to get started so get on it Cheers. https://el-loco.com.au/product-category/martin-boys/
15.01.2022 Camaro looking a bit different. Should see some paint next week
15.01.2022 Made a start on Josh Hoskings hq wagon build. Should make a tough streeter. Mini tubbed with 15x10 billet specialties and a 295 on the back. Fabricated 9 and full floating hubs, adjustable 4 link with coilovers and wilwoods all round, full cage and big single turbo ls combo.
14.01.2022 Got the camaro back from sandblasting today. Ready to start fitting the brand new panels. Old quarters were cut off after finding an inch worth of bog under the paint
14.01.2022 Dragged tonys 55 Oldsmobile out of storage today. Keen to see this one done. 4 link and 9 rear end, hq Holden front rails grafted into the factory Oldsmobile chassis, tubular front arms with airbags all round. Powered by 6L ls and 6 speed Manual
13.01.2022 Finally got some decent weather to get the rx2 sand blasted. In for rust repairs, panel and paint
13.01.2022 Hz Ute on the go. Will be getting full rebuild. New paint, suspension, motor and interior.
12.01.2022 Bit more done on the hq Ute chassis tail shaft loop pan hard bar and some more bracing next week floaters fuel cell and exhaust #hqute
12.01.2022 4 link and braces welded in And quarters got blocked and back in primer
11.01.2022 59 Cadillac bonnet we de-skinned, and got Sand blasted. Ready for rust repair sections then panel and paint
10.01.2022 Got some colour down on the xy Ute this week
09.01.2022 Xy we had in this week for new suspension, clean and paint the underneath, supply and fit wilwood brakes.
08.01.2022 Another camaro dropped off for panel and paint.
07.01.2022 Xy painted and ready for fit up
04.01.2022 New rear quarters, and all new panels fitted and gapped this week on the camaro.
04.01.2022 68 camaro in fit up stage full rewire just completed new power rack arrived from retro rack waiting on front tubular arms and coil overs
04.01.2022 Added a bit of orange to the polara this arvo
04.01.2022 Shaved engine bay for FRYGMH
03.01.2022 53 Buick convertible getting closer to paint
02.01.2022 37 Chev roadster chassis back rolling. Just waiting on shockwaves still from air ride
01.01.2022 More parts rocking up for the 34 ford truck build.
01.01.2022 Next project started for Jesse Martin, Xl falcon Ute. Will be getting the full chop shop treatment. New quarters, custom rear floor, 4 link, and airbagged front and rear.
01.01.2022 Engine bay done and dusted
01.01.2022 37 chev roadster mocked together and off to Clive at the hammerworks for new door skins and boot skin.
Related searches
- Kaye Toplis
Businesses Beauty, cosmetic & personal care Product/service Beauty cosmetic & personal care
+61 419 704 190
26 likes
- Kassidy Yang Photography
Businesses Local service Photographer Photography and videography
+61 466 632 040
4364 likes
- HSV For All Occasion’s
Businesses Vehicle, aircraft and boat Automotive aircraft & boat
+61 432 012 096
69 likes