Australia Free Web Directory

Maxx Performance Fabrication & Parts in Melbourne, Victoria, Australia | Automotive, aircraft & boat



Click/Tap
to load big map

Maxx Performance Fabrication & Parts

Locality: Melbourne, Victoria, Australia

Phone: +61 3 8759 1301



Address: Dandenong South, Melbourne, VIC 3175, Australia 3175 Melbourne, VIC, Australia

Website:

Likes: 976

Reviews

Add review



Tags

Click/Tap
to load big map

23.01.2022 BF Barra manifold made to suit a twin scroll Turbo Thick stainless steam pipe and maximum dump pipe clearance.



23.01.2022 Big 60mm screamer pipe and a Coolant tank hardpipe we made for a FGX in the shop at the moment.

23.01.2022 Working on a low mount external wastegate design with a high flow and with better heat managment to prevent agains split diaphrams.

23.01.2022 Another Maxx Performance GR Yaris Stainless Catback System! Single 3" into twin 3" rear finished off with 4" matt black tips. #maxxperformance #gryaris #gazooracing #toyota #gr #catback #maxxfabhouse



21.01.2022 FG 50mm External Gate Kit. These kits work extremely well allowing us to run a flat 12psi (spring pressure) and then tune it up to a flat 22psi. These kits avavailable a change over & as a drive in drive out. ... #GFB #Maxxperformance #50mm #Fggatekit #externalwastegate

19.01.2022 IN DESIGN STAGES NOW!! GT/GTX3582 Turbo housing locking plates. As high boost internally wastegated turbos are more common place we now are seeing alot of housing rotate and and in turn de-tensioning the actuator. This is still planning stage and goes off to drawing on monday.... Features - 2mm stainless plate - locking hardware will be stainless next batch - GT will have two locking pins and one with the GTX We will have to install them in the shop with a jig to locate the hole for the locking stud and once locked the housing it will not rotate

17.01.2022 A nice G42 plazzy clamp mod So clean that little extra effort make all the difference.



17.01.2022 Just finished a catback for our Yaris GR. We removed the rear muffler which was fairly restrictive and went for a full 3 and twin matte black exhaust tips to suit the factory rear bar. Has a nice note now and feels a little stronger on the street.... #savge3 #yarisgr #gazooracing #maxxperformance

16.01.2022 Custom 4"exhaust for this killer Turbo Territory As previous the stock exhaust hits a wall at low 300awkws we needed to upgrade nowit has a heap more flow and a tuff note aswell. #Alltheflows #quickbus #turboterry #MAXXFAB

16.01.2022 Super Mang in for a custom exhaust.

12.01.2022 Something a little different... Turbo under the rear of a V8 GT twin outlet oneside will be turbo the other will be a gate exit.

09.01.2022 FGX Falcon Front Strut Brace We fitted out with custom: - Coolant Tank Delete - ECU Relocation ... - Strut Brace We actually noticed a huge difference in the car with this fitted! Now back up to the Dyno for some more 98 power! #maxxperformance #fgx #g6et #xr6t #fabrication #strutbrace



07.01.2022 Todays job a 5" dump pipe to suit this custom stainless manifold to suit a GTX55 #canweld #bigturbotime #allthecolours

06.01.2022 New!! 3.5 track exhaust for the GR Yaris #Maxxfab #GRyaris #alltheflows

05.01.2022 One of Todays Jobs...... Aluminum hotside on a Wicked G42 Barra. #plazzyclamps #G42 #prettywelds

03.01.2022 Custom Stainless Pro-Mod Barra Mainfold Mated up to a GTX55 with a Tial Vband stainless housing. Nice and low. #maxxfab #barra #gtx55 #promod

01.01.2022 GR Yaris Maxx Stainless Turbo-back system! Consisting of: - 3.5" - 3" Dump Pipe with 100cell Cat - 3" mid pipe ... - 3" Catback single outlet with a fake tip. #maxxperformance #maxxfabhouse #gryaris #gr #gazooracing #catback #turboback

01.01.2022 Thats today done coldside Nizzy cooler pipes and a few other small jobs #G42 #plazzyclamps #bigboypipes #theboycanweld #maxxfab

Related searches