McDonald Bros Racing Products in Thomastown, Victoria | Automotive, aircraft & boat

McDonald Bros Racing Products

Locality: Thomastown, Victoria

Phone: +61 3 9465 0000

Add/Update information

Reviews

Tags

• Automotive, aircraft & boat
• Motorsport shop

24.01.2022 This 4 link clip, running Moly 4 link, wishbone locator and 40 spline Strange floater is going into a Toyota Landcruiser tray for Chris Hawkins in Mackay. Customer will be using his coil overs.

23.01.2022 Hot Rod Magazine feature on race testing the Viking Crusader shocks

22.01.2022 UNPRECEDENTED DEMAND IS DELAYING DELIVERIES A few months ago, with the COVID-19 pandemic looming, we were unsure about our future. We were prepared for the worst: A drop in sales, a scaling back of our production output, or even a "hibernation" of our business. ... Instead, something we could never have foreseen occurred - you rallied behind us, and kept purchasing the McDonald Bros Racing and Viking product range. The support you have shown has not only kept us in business, it has in fact meant that current demand for our products has outpaced our ability to supply. Unfortunately this means, for a short time, there will be some delays on certain products. We apologise for this, but promise we will rise to this challenge. We thank you for your continued support, and ask for your patience while we work through the demand.

22.01.2022 We don't often do Borg Warner diffs. Had a customer that required this Nissan RB31 diff to have our LH-X Torana bracket set welded to it. Configuration worked out well with not a lot of weld on the cast centre section. To supply the brackets and weld them onto your diff is $600.00.

21.01.2022 Customer has a healthy LS motor to install, we were asked to install a mid chassis, tri 4 link, coil over, 9" conversion with mini tubs. As well as install a moly roll cage with a removeable front section.

21.01.2022 We often wonder what our product goes into, when a customer sends through pics of their project, it's great to see the finished product. Great job Ron

19.01.2022 Follow along for the transformation of this ugly duck Bedford van into a super cruiser. Come back with your suggestions on what you think should be done. Taking it to the tip isn't in it.

17.01.2022 COVID-19 UPDATE Yesterday Premier Andrews made an announcement that people living in metropolitan Melbourne and Mitchell shire will be required to wear a mandatory face mask when leaving home due to a concerning number of corona-virus cases in recent days. Because of this we are also stopping external walk in visitors from coming to our store/workshop in a further step to protect our workers at this time. If you do require to attend the store it will be by appointment only and face mask must be worn. We are fully committed to keeping all our workers safe and thank you for your ongoing support during these challenging times.

16.01.2022 We have designed a new T shirt. With the logo on the front breast. Now available for $25.00 + postage. Available in any colour as long as it's BLACK. We don't have them on line to purchase as yet. Contact us on 03 9465 0000 to order.

16.01.2022 Barry requested the rear suspension to be upgraded, we installed new tubs, Gazzard bros single leaf spring and track rods, Viking Crusader double adjustable shocks, anti roll bar, Wilwood brakes. Will be interesting to see the results.

15.01.2022 XY Falcon came into the workshop for mini tubs and tri 4 link kit full floater 9" diff to be installed. A common asked question is does the fuel tank have to be relocated. As can be seen in the pics no it doesn't.

15.01.2022 We have now cloned our Monaro in black. Installed a full floating 9" our race moly 4 link kit with Viking Crusader coil overs. Tube front cross member with the Viking Crusader front struts and 335 mm 6 piston caliper front brakes. Full race moly roll cage and Kirky alloy seats.

15.01.2022 OVERSTOCK ON FORD 9" DIFF GEARS. We have a few sets of the US Gears that we will sell at a reduced price. ALL ONE PRICE $300.00 inc. + FREIGHT, ... NORMALLY $375.00. 3.00 x 1 3.50 x 1 3.70 x 2 3.89 x 2 4.11 x 1 ORDER ONLY BY PHONE 03 9465 0000 FIRST IN BEST DRESSED.

15.01.2022 We have now completed our part of the construction. Off to have the turbo's set up.

12.01.2022 We wish to advise our customers that McDonald Bros Racing is still operating at 100% and will not be laying off employees, we will continue to support our staff & customers as best we can and we will continue to supply. As such we will still be taking phone orders on 03 9465 0000 and using Direct Freight Express to deliver. We are a family owned business and have been operating for 50 years and we will continue to supply our product range in this trying time.

12.01.2022 We have a stand P032 in the Performance Garage Grand Pavilion at MotorEx this coming weekend 11-12th. Come and say hi to us on the stand. Also in attendance on our stand will be Mike Proulx representing Viking Performance. He will be holding a seminar during the weekend, at this time not sure of the time schedule. If you have any questions on setting up your Viking shocks come and say hi to Mike.

12.01.2022 We have been making this kit for quite some time, haven't had the opportunity to post any pics of it though. This chassis is for a "69 C10 Chev. The clearance between the top of the diff to the chassis is 75 mm. These kits are available for most Ford F Trucks as well as many Chev applications. As a complete kit including the Viking coil overs and Panhard bar is $1995.00

11.01.2022 HQ Monaro has been set up with mini tubs, braced 9" housing, adjustable upper and lower trailing arms, Viking coil over shocks and an anti roll bar.

10.01.2022 Another very satisfied customer, achieving his best times so far. Car was raced at the Holden Nationals Heathcote Raceway. It Ran 9.76 @ 141.8 MPH. It has a Full built RB30 Turbo motor with a GTX 3582 Gen 2 Turbo and Powerglide Auto. ... Car was scaled at 1575kg prior to the event. It also features a Mcdonald Bros Racing rear end that was all installed by the team at McDonald Bros Racing which includes: 1. Mini tubs with 325/50/15 Radial Tyres. 2. 9 inch 35 spline Diff 3. Factory positioned 4 Link with adjustable Upper & Lower arms. 4. Viking Crusader rear Double Adjustable Coil Overs 5. 30mm rear sway bar. 6. 6 Point weld in roll cage with removable side intrusions. See more

10.01.2022 BURN OUT CHASSIS CLIP on rear, logo on front, T SHIRTS AND HOODIES "T" Shirts available in Small, Medium, Large, XL and XXL $25.00 + postage, usually $20.00 Hoodies available in Large, XL, XXL, $45.00 + postage, usually $20.00.... Call on 03 9465 0000 to place your order.

09.01.2022 How to set up your leaf sprung vehicle with Viking shocks.

09.01.2022 NEED HELP Desparate to find a UC Torana diff housing, only need it to set up a jig. If local will pick up.

09.01.2022 Due to an unprecedented demand on our product range we cannot promise orders placed now to be delivered prior to the start of February 2021. It is still advisable to place your order so that you are in the system.

08.01.2022 FOR SALE New Ford 9" housing with small bearing ends, billet 31 spline Altra 9 axles with bearings, retainers and studs. Ford bolt pattern. Total flange to flange measurement 1130 mm. Asking $1900.00

08.01.2022 Full chassis constructed to go under a MPW Performance customers HQ coupe

07.01.2022 We get a lot of enquiries for 4 link chassis clips but still maintain the back seat. Here is one we have in the process.

06.01.2022 Just a small update on the C300 Chrysler, all the good bits being attached.

06.01.2022 Tri 4 link chassis clip ready to be shipped out. With Viking double adjustable coil overs, anti roll bar to go into a Mazda R100 for Mongster Fabrication. Housing will be cut to length when customer works out rims.

05.01.2022 Have been asked many times if it's OK to run the Viking shocks upside down.

03.01.2022 4 LINK CLIP CHASSIS RAILS NOT SO PERFECT Cheap 4 link clip chassis rails, have wrinkles on some (not all) bends. Are the correct shape though.... Normally $230.00 each, Asking $120.00 each

03.01.2022 An update on the C300 Chrysler, coming along after a stint at MPW for engine and exhaust.

03.01.2022 1967 NOVA Fabricating up a full chassis. Will have a 4 link with Viking coil overs 9". Double wishbone front suspension. Will put up pics as it progresses along.

02.01.2022 If Scotty can do it anybody can. All mini tub kits are vehicle specific, cost is $290.00.

02.01.2022 All of the staff here at McDonald Bros Racing hope that you and your families are safe and well and managing through this Global pandemic. WITH STAGE 4 RESTRICTIONS placed on Melbourne and Victoria and following the advice & guidelines set out by the Victorian Government, from 6/8/2020 McDonald Bros are conforming to the restrictions imposed Our Reception and showroom will be closed until further notice.... We will remain open to service our trade and retail customers Australia wide. Standard trading hours for phone and email contact only 8.30 am to 5.30 pm Monday to Friday. Due to the pandemic we are still experiencing short supply of some outsourced products, please bare with us as we will continue to work on this as a priority Please note we are operating on reduced staff, you may experience delays on the phone. We recommend you place orders via email to [email protected] Our workshop will close it's doors today 5/8/2020 for 6 weeks, unless restrictions are lifted before then. Ray & Russell McDonald

02.01.2022 Always good to see customers projects coming together. These pics were sent to us recently, and it's looking the part. Stepped rails, 4 link, Viking coil overs, fab 9" housing, disc brakes.

02.01.2022 From small beginnings, large projects start. keep them coming.

01.01.2022 We have now got our new web site www.mcdonaldbrosracing.com.au up and running, still fine tuning it. Check it out, come back if you find there are any issues.