Micks Ally Fab in Darwin, Northern Territory | Commercial and industrial

Micks Ally Fab

Locality: Darwin, Northern Territory

Phone: +61 8 8947 7037

Address: 5 Swan Crescent, Winnellie 0820 Darwin, NT, Australia

Website: http://www.micksallyfab.com.au

Likes: 1638

Add/Update information

Reviews

Tags

• Commercial and industrial
• Metal fabricator

23.01.2022 MAF team doing what they do best. Quick turn around refit for Coral Expeditions vessel the Coral Adventurer!

23.01.2022 Another Re-skin recently completed by the MAF crew. Upgraded the hull sheets from 3 mm pressed to 4mm 5083 plate. If you are having consistent cracking issues with older pressed style hulls, this could be an option for you. Drop in and see the MAF team with any queries!

22.01.2022 ~ N O W H I R I N G ~ Micks Ally Fab are looking for another specialist welder / fabricator to join our team. To be considered for the position, we desire you t...o be a self-starter who is able to work as part of a team, but also autonomously. You must be able to weld stainless steel, aluminium and steel to a high standard and take pride in your workmanship. If you think you fit the above, and are looking to join a great business with a highly dynamic range of work coming in the door then please send your resume to: [email protected] See more

20.01.2022 How’s this for a neat simple console. Plenty of access for wiring and the most important part. Two stubbie holders in the top shelf.

19.01.2022 Major refit for the Noble currently in progress. Keep checking in for updates as it progresses. This things going to be a weapon!

19.01.2022 Please be advised Micks Ally Fab office is closed to walk in customers to limit non-essential contact. visitation will be by appointment only! to book an appointment please contact the office on ... 08 8947 7037 or send us an email at [email protected] Thank you for your understanding.

19.01.2022 Turns out this isn’t what Dave expected when I told him he could spend the day on the water

18.01.2022 How neat has this turned out! Our customer didn’t want to burn the paint with a weld on unit so we fabricated and installed a custom electric motor mount/ access step to suit their requirements. MAF is your best bet for anything custom!

17.01.2022 This was a cool little job, design and fabricate a custom camera and light mount for the behaviour of fish to be monitored for a valued client of MAF.

16.01.2022 Nice mornings starting to roll through as we kick off two major repairs for two valuable commercial clients!

15.01.2022 T top back from powder coating and off for final wiring and fit up!

13.01.2022 Quick trip for the team this morning for a repair and site measure up for our upcoming installation!

12.01.2022 Mick is selling his boat! https://www.gumtree.com.au//6-3mtr-noble-super/1225139291

12.01.2022 Here’s a few progress pic’s of the noble refit. Cab and floor linings have been removed, cast deck well on its way to being completed. We removed the existing under floor fuel tank and with a slight design change we managed to get an extra 100ltrs capacity than what the original tank held. I’ll keep posting more photo’s as the refit progresses.

09.01.2022 New stern tubes and some minor hull repair to one of our valued commercial customers vessels.

09.01.2022 Happy 18th birthday to one of our valued apprentices Nathan, Putting some social distance and special candle blowing technique into practice!

09.01.2022 Neat little spa cover recently installed

09.01.2022 Happy birthday to our first year apprentice Louis Byrne who turned 17 earlier this week. MAF prides itself on apprentice training, starting a new apprentice every year. MAF training for the future.

08.01.2022 The noble is progressing nicely, hatches on the casting deck, lower level storage compartments and rod locker plus the console has slotted in perfectly. So close yet so far!

06.01.2022 More noble spam- this is something myself and Matt, our Workshop Foreman, have been working on for sometime. The biggest problem with tee top legs is cracking, hence why you see so much truss tube work. This is to strengthen up the legs while allowing them to flex through the whole frame. It’s quite a labour intensive process designing and fabricating what can sometimes be elaborate designs in the hunt for a perfect combination. With the assistance of the router and a bit o...f previous experience and forward thinking we decided to experiment with heavy plate. This design, I have gone with is 25mm 5083 grade plate. The design was restricted to cut both legs from one sheet in order to produce a cost effective, however strong alternative to the standard tube style legs. If you zoom in you will see the channel we recessed in to allow for all the wiring to get from the console to the roof nice and neatly hidden with a cover plate to finish it off once the wiring is complete. The tee top unit is currently off to be powder coated so keep an eye out for the finished pics in a coming post shortly! See more

02.01.2022 A huge thank you to all our sponsors for their generous contribution to the University Pirates Rugby Union Football Club over the past season. We cannot thank y...ou enough. You are part of the foundation of this Club and without you we would not be the Club we are today! Here's cheers!!! Simon Peters and his squad at AAMS Russell Reid and his team at the Casuarina All Sports Club Paul Winter and George Kamitsis at Habitat NT Calum Page at Physio North NT Mick Carey and the gang at Micks Ally Fab Marg Jenner and the crew at Fannie Bay Cool Spot James de Dassel and his posse at JJs Car Hire Everyone at Kennards Hire Everyone at Nightcliff Community Bank Branch See more

01.01.2022 How’s this for a neat simple console. Plenty of access for wiring and the most important part. Two stubbie holders in the top shelf.