Mr Pajero in Bullsbrook, Western Australia, Australia | Automotive

Mr Pajero

Locality: Bullsbrook, Western Australia, Australia

Phone: +61 418 942 167

Address: Resonator Lane 6084 Bullsbrook, WA, Australia

Website:

Likes: 4864

Add/Update information

Reviews

Tags

• Automotive, aircraft & boat
• Automotive
• aircraft & boat

25.01.2022 So I enjoy sharing my knowledge and helping out where I can, dont expect anything in return but when someone takes the time to give me a shout out, it certainly puts a big smile on my face. Thanks for going to the trouble of making the vid and mentioning me Michael If you cant be bothered watching it all, go to the 5 minute mark https://youtu.be/fnNZre9ENuk

25.01.2022 So altered the offset of the wheels and it looks way better, only issue now is I cant turn. Will have to go 35s or 36s. Dont pay attention to the current camber.

24.01.2022 I challenge anyone to beat the build up in this upper manifold think this one take the win! I was expecting the lower manifold to be far worse.

23.01.2022 https://www.whichcar.com.au/car-news/pajero-for-australia

22.01.2022 I thought it was a reasonable diagnostic suggestion?

22.01.2022 Rusted tow hitch removal, extreme measures required.

21.01.2022 Rear winch and centre bumper section in steel done

21.01.2022 We are proud to announce that we are now an authorised distributor for KAON products. We are currenty taking pre orders. *Rear table to suit NS/NT/NW/NX. Will also fit gen2’s and gen3’s but current instruction sheet included is for gen4 only. $285 Plus shipping.... PRE ORDERS *Parcel shelf to suit NM to NX. $275 plus shipping. *Light cargo barrier to suit NS onwards, should also fit NM/NP but waiting on stock to arrive to confirm. $315 plus shipping. I have not setup a facebook shop as yet so please PM me if you are interested.

20.01.2022 Ok final decision right here. 37 rears, 31 fronts

19.01.2022 Well that was a heck of allot easier than I thought. Will Do for now until I come up with a complete rear bar. Not finished obviously and those bumpers pieces are just spares but Im pretty happy with the concept

19.01.2022 Not a Pajero but we work on allot the Tritons too, good comparison with the overrated Hilux. https://www.facebook.com/102036654504967/posts/212023386839626/?vh=e&d=n

19.01.2022 This was awhile ago, volume up to hear the full send hahaha. Got me stumped why my motors dont last?

19.01.2022 Not exactly Pajero but to the right, Kings 1/2 extension, left Stanley, cant recall ever seeing a 1/2 extension bar bend like this. Still did the job I guess.

18.01.2022 New boots for the wifes squishy, you wanted big and chunky sweetheart, well here you go. Rolling on 33s now.

17.01.2022 UPDATE: ALL CURRENT KITS SOLD! Due to the overwhelming interest, will will be going into mass production very soon. If you are interested in the next batch, please PM me to register your interest. Subframe drop kits, 2000 NM to Current. These kits have been precision made and tested to ensure the stability and traction control is not altered in any way. ... The kit will provide 2 lift whilst retaining the factory CV angle. A 2-3 suspension lift can be added to this kit to give you a total 5 lift. Kit consists of the following. Custom extended trailing arms. New Trailing arm Bushes. Extended Steering knuckle. Front strut Spacers. Custom Dobinson IMS big bore rear shocks to suit 2-5 lift. Front and rear subframes spacers. Bolts with precision machined collars. Power steering reservoir drop bushes and bracket. Radiator drop bushes. Transmission crossmember drop bushes. Everything needed is included in the kit. We have done our very best to keep the cost down as much as possible without compromising quality. These are not adr approved and are sold as for off road use only $2650 supply only, fitting available. Kit can also be supplied without the Dobinson rear shocks if you want to source your own shocks. Very very limited number and no further kits will be made once these are sold out.

17.01.2022 Might just be me but I love the offset stance (wont stay that way tho), 50mm wider on the rear

16.01.2022 ARB twin compressor 9 ltr air tank Winch wired Draws installed Step ladder to get to the fridge TBA... Slowly but surely getting through the list Dont forget to like and follow for more updates and Pajero related posted and vids Checkout Black label storage solutions for the best draw systems on earth. This one was one of his very first, he has come a long way since and has some fantastic ideas and solutions. https://www.facebook.com/blacklabelstorage/

16.01.2022 And people wander why I cant remember the message they sent me last week, this is just one days worth hahaha

15.01.2022 How bloody terrible is this. NS Pajero went in for repairs and came out half NP and half NS, they repaired the front end of this NS with NP parts. The fenders, bonnet, headlights and grill are from An NP, bull bar and rest of vehicle NS. You can see the bull bar doesnt even match up properly. Panel beater tried to convince the customer that they were NS parts when they would have full well known they werent. Unfortunately was the private repair (not through insurance) and the panel beater has now gone bankrupt. In my opinion this car is now close to worthless. Feel sorry for the owner.

14.01.2022 Ok here we go again, after a great deal of feedback I am tending to agree that the hoopless bar doesnt suit. Planning on swapping out for the hooped one in pic2. So pic 1 or 2?

14.01.2022 NS Pajero, 137ks and valve clearance adjustment never been done!

13.01.2022 Catch can bracket

13.01.2022 Finally stocked up with Dobinson, Webco and Lovell suspension components and more to come. Hit me up if your looking for a lift kit from budget entry level kits to high end kits. We keep stock of Webco/Lovell and Dobinson but can supply and fit any configuration you desire.

13.01.2022 Before I start drilling, pic one or pic 2?

12.01.2022 Had my mate Antz do some basic tuning on the V8 Paj, still lots to do but getting closer

11.01.2022 So I hate to say it but I really dont like the look at all. Very much dislike the flares regardless of colour but my flare budget is now depleted so I am stuck with them. I still need tint, rock sliders, roof rack, winches, graphics antennas but there is something missing, doesnt look tough at all. On that note, any window tinters wanting to do Mr Pajero a great deal ... Few bolts still missing from the flares, need longer ones. Im on the fence with bull bar lighting too. PLEASE LIKE AND FOLLOW MY PAGE FOR FURTHER MODS AND TO STAY UP TO DATE

10.01.2022 gave the Apprentice the choice on todays jobs

09.01.2022 Just tacked everything together, few mire small bits to cut and tac and it will be off to the zinc platers then raptor coated.

08.01.2022 Ready for powder coat or maybe Linex, havent decided yet. Either way I will be getting it zinc plated first so it doesnt rust when scratched

08.01.2022 Thats not a Pajero!

08.01.2022 Number plates for the V8 Pajero are in

07.01.2022 Test fitted 35s onto the Monsta Paj, there is room to go 37s but Im just not sure what size to go?

07.01.2022 So Im not much of a drinker but it still puts a massive smile on my face when customers roll up with these goodies. Makes me think I might be doing something right. I havent bought alcohol in years, love you all and love Pajeros

05.01.2022 Only first light coat, ran out of paint. I think white will look ok.

05.01.2022 Generation 4 Pajero rear door strut fix.

05.01.2022 Well it fits but I am really at a loss as to how to trim around the door handle etc to make it look good.

05.01.2022 Who else has to use a step ladder to work on their 4x4?

05.01.2022 So Im jumping ship, many of you would know Im a big fan of Lovell and Bilstien lift combos but their product availability has been shocking for awhile now. Thought I would try an alternative and went Dobinson. Their IMS range is a little cheaper than the above combo and I have to say as far as suspensions go, they are one of the sexiest setups out their. Chunkiest front struts by far, tough looking and the ride is beautiful. From now on I will be recommending Dobinsons over Lovell/ Bilstien.

03.01.2022 Anyone know the legalities of external barwork as per my toddler like drawing efforts lol

02.01.2022 So had no intentions of making another rear bar but here we are again. This one is more like a skirt or centre infill to accommodate the winch. Nothing special this time, cheating and leaving the corners as is. Might create a support so I can hang a wheel carrier off it for the 37 tyre but thats about It I think. It is contoured in the middle but cant see it in the pic.

02.01.2022 Little more progress on Pajzilla (cant use Monstapaj as thats being used already). Reshaped the front flares ready to trim and paint. Did a heap of wiring inc 3 thermo fans, fuel pump relay and a couple other things. Progress still slow but not getting much spare time to work on it.

01.01.2022 So trial fitted the real crappy fitting flares as my replacements have been stuck in KL for over a month now. Managed to get them to fit fairly well. Now I know some of you may cringe but I am taking them off and painting the white, same colour as the car but in Raptor coating using a Shultz gun also known as a splatter gun to give it a nice texture. Can always paint them black again if it doesnt look good.

01.01.2022 135 litre ultrasonic, picture of end result in comments.