MWS Custom Distilling & Brewing Equipment in Rockingham, Western Australia | Commercial and industrial

MWS Custom Distilling & Brewing Equipment

Locality: Rockingham, Western Australia

Address: 4/8 Carlston road where not always here, please call or message the page before coming in 6168 Rockingham, WA, Australia

Website: http://www.mwsperth.com.au

Likes: 2755

Add/Update information

Reviews

Tags

• Businesses
• Commercial and industrial
• Metal fabricator
• Metal & steel company

22.01.2022 New Brew On Premises 4125l pot set up for Brew U in Canning vale!! These guys are producing some awsome drops, the Coconut Kolsch and Wet-Hoped Golden Ale are definatly top of my list!!

19.01.2022 Hand made copper reducer There a bit more work than picking up a plumbing fitting but worth for Australian made products!!

18.01.2022 Site works not all bad

18.01.2022 Some 30l kegs turned into pressure fermenters, 4 inch float dip tubes fitted with thermowells to the bottom to keep the float tubes centerd

15.01.2022 Some little mods to these pots and 29l kegmenter!

15.01.2022 Weve been working on some new parrots these ultra low capacity hold 70ml total and 55ml with the 165mm alcoholmeter at 94%!! Can be made to suit any high abv and will be making some to max out at 70% that should take out another 10-15ml out

12.01.2022 Compact Portable CIP unit anyone? We have made this up for a customer tight on space keeping it nice and tight its 825mm long x 630mm wide and 900mm high. Both kegs have 8inch tc tops, center bottom drains running into the pump manifold with custom 4 way tee, mandrel bent elbows to reduce welds and the right keg with element and temp probe port. Return to the unit will be by hose, can be made up with hard piped manifold for return. Will be making up 4 keg system @ 1690mm long with hard piped manifold for return line. These can be made in 50,58 and 118l in kegs or custom-made vessels to any size.

11.01.2022 Nice little spot for smoko!

10.01.2022 New life for this Ex wine barrel! Can be set up with single, double or tripple taps with a very snug fit on 3x19l corny kegs and 2.6kg co2 bottle inside!!

09.01.2022 Upgrade time 4 inch stainless (copper internal on the plates, packed section packing& condenser) bubble plates system off to join forces with a 260l boiler we made up earlier this year!

07.01.2022 Barrel leaking?? No worries we'll put a couple screws in there to tighten up those bands ;)

07.01.2022 Nice little 30l keg with a 15l hop/infusion basket on an 8 inch triclover

06.01.2022 Big thanks to our local neighbourhood methry for the awsome front door job!! Unfortunately its the wrong colour so weve gone and made a new one up ;) they may have thought there smart parking up the street but the cctv weve of them and the licence plate of that peice of shit white statesmen is going to come in very handy! No need to worrie tho, no stills were harmed in the making of these idiots breaking in!!!

06.01.2022 Our Custom made tees from our custom made equipment When theres no Australian made option theres only one thing you can do!

06.01.2022 Snuck out with the crew to get keg fill for our NYE party!! these 2 will be on juice boxes for the night tho they'll need to be straight headed to assist me with some keg stands!! Campus all grain Draught on tap tonight its going to get messy!

05.01.2022 Another pallet of legally obtained used kegs for us to stick our teeth into!! $300 for the left electric and right gas set up with side drain and 450 for the center botom drain with butterfly valve. 2x 2300w elements are $150 and 2x3000/4000w elements are $180. $110 to swap the triclover blanking cap for a triclover screw on sight glass.

05.01.2022 So we wrapped up 2020 with a little something for our homebrewing fans!! 50l pressure fermenter with a valved chamber for purging co2 and dry hoping under pressure(a bit over the 200g of the hop pellets we've got on hand), 4 inch ball post lid with thermowell and center guide for the float dip tube! We didn't get time for turning these into conical fermenter this year but well be back in the shop on the 11th and getting stuck into the the 30l and 50l conversions. Hoping everyone has merry Christmas & a Happy New Year!!