New Generation Fabrication in Warburton, Victoria | Automotive

New Generation Fabrication

Locality: Warburton, Victoria

Phone: +61 475 383 942

Address: 68 Big Pats Creek Road 3799 Warburton, VIC, Australia

Website:

Likes: 1938

Add/Update information

Reviews

Tags

• Automotive, aircraft & boat
• Automotive
• aircraft & boat

23.01.2022 Another neat canopy set up out this week. Come up an absolute treat! Jump across to out Insta page and give it a like

22.01.2022 The cousin is happy with how his new hound crate turned out, as are we!

21.01.2022 So about 4 weeks ago Chris picked up his new crate. This crate was not built for his Ute but still looks the part. Frame 32x32x2 Doors 25x25x3 Roof sheet 2.5 Walls and doors 1.6... Light strong and a happy customer

21.01.2022 ITS HERE The long wait is over it is finished and on the old faithful ranger! Our new aluminium tray is ready for you! Your choice of an underdraw or not and your own design In the head board!! Full aluminium tray constructed of 80x40x3mm outer frame and headboard, 40x40x3mm cross members under a 4mm hardened plate floor and 100x50x3mm main chassis rails with 76x40x6mm C Chanel mounts. This super tough yet light tray is ready to take on anything you throw at i...t!!!! Msg us for a quote for you new aluminium tray.

21.01.2022 Just a quick little job done yesterday 204mm stainless water pipe with slip flanges for an industrial cooling tower

19.01.2022 Half dry half crate all finished up and out the door. Powder coated mat black, grease able hinges, whale tail locks.

19.01.2022 A nice 4 bay hound crate out the door ready for the season! Nice and neat.

17.01.2022 Had this GU come in with the coil tower almost torn out!!! So we had to straighten the tower and fabricate this custom coil tower brace. It has 50mm holes in the top plate for those who run air bags. Fabricated all from 6mm steel. High tensile 8mm bolts. Can build to order. This brace will NOT fit under a wagon.

17.01.2022 Sorry to everyone, I haven’t been posting lately I have just been flat out and have so many jobs on the go. Hears a snorkel made and fitted today. New mounting bracket designed and new mesh on the end.

16.01.2022 Beach launching set up/spair wheel rack.

16.01.2022 Another set up out the door. Big dry boy with a in house fridge slide for the 80 litre. Gun safe, ammo safe and shelve. The deluxe dog box for the upper class hounds. With 12mm ply floors and half walls to keep them nice and warm.

15.01.2022 Steve’s tray setup is finished! We built this tray over a year ago and he has come back to get the box made. Small gun/goodies box up top. Dog box up front and a big dry box at the rear for all his camping/traveling gear to go in. We are pumped with the out come!!!

14.01.2022 Finished up this tray and hound crate last week. Was a long build but was good to see it finished and on the car. The crate has extra support bars threw the middle of the mesh. Has mounted timber floors and a timber roof to stop condensation and to keep the hounds warm.

13.01.2022 International T-line truck front quarter made from aluminium. The old fibre glass one was taken out on a post so I didn’t have much to work with but it come up a treat. Had to repair and weld the cast aluminium step and now off to paint

13.01.2022 Another internal police style dog box done and dusted. Fitted to a new Nissan navara The colour was a good match for the trim. Plenty of room for Talia’s scent detection dogs

12.01.2022 So I have been flat out lately and sorry that I haven’t posted much but hears a intercooler and pipe upgrade on a GU patrol. Was a tight fit but it’s all going to be changed in a months time after the big Cummings go’s in

11.01.2022 Just out in time for the weekend! But of a tricky notch out around his short tray side posts and a little neat Sapir wheel rack on it!come up looking the part on the 79!

10.01.2022 Aluminium tray an canopy we did a little while ago on a brand new 2020 D-max 4mm hardened plate floor of tray Under tray boxes Under tray draw Jack off canopy ... Tradie rack Central locking on rear draw and canopy Stay tuned as a new aluminium tray is coming

09.01.2022 So finally I got to finish off my own tray a few weeks ago for my 2012 PX ranger Had to get a bit fancy. PM for a quote

08.01.2022 A quick little roof top tent frame for deans cruiser 40x40x3 frame 2.5 roof sheet

07.01.2022 A canopy done last week off to get canvas. Come up looking the part. All built from Australian aluminium 32x32x2mm frame 25x25x3mm door Dimond mesh ... 3mm roof with tie rails 2.5mm false floor And a little 400mm hood at the back for fuel containers and what not Give us a msg for a quote

06.01.2022 A steel crate built for a good mate over in SA to cart all his working dogs around the farm

06.01.2022 A big hand rail we have done in the last few days. 25 meters long all out of 304 stainless steel. All mandrel bends so that means no sharp corners. Customer is happy we are happy

06.01.2022 So little job left today. Aluminium removable bait board with drain tube and rod holders, Powder coated and ready to get the butcher board put on. Also a drybox/lockbox for all the good stuff.

06.01.2022 So we have been pulling out the old tools and doing some panel bashing this week. Rear quarter was built of bog . So we have wheeled and folded a new section to be welded in. A bit over the top for an old patrol but better to be done right the first time. To be continued

05.01.2022 So I got to finish up this BIG BEAUTY today. Been on and off it for a few weeks now but the end result come up amazing! Happy customers!! Custom built outdoor open fire place. 1500x1000x700 WHD All built out of 10mm plate. Has a 6mm butterfly in the flu ... 12 flu See more

05.01.2022 Another one out the door! Big 700mm dry box and 4 hole crate All build from Australian marine grade aluminium

04.01.2022 Mr Willy Smiths dry box and hound crate come up a treat! Custom built to his specs with a gun box in the top of the dry box and a flat floor.

03.01.2022 This tiny come in looking rather sad and left looking the part! Flat floor casting deck up front with under floor storage. Wide gunwales. Electric motor mount and EVA foam fitted. If you need any mods to your tinny send us a msg

03.01.2022 So cats don’t always land on there feet.... So we got to do some nice panel forming. Customer is happy and it is off for paint.

03.01.2022 Alrighty guys a new tray is coming soon!!! Get over to out Insta page and follow it and follow us in the new build @newgenerationfabrication

02.01.2022 Another crate and dry box out the door ready for the season. All fully tig welded all locks key alike