NextGen Race Cars in Pakenham, Victoria | Automotive, aircraft & boat

NextGen Race Cars

Locality: Pakenham, Victoria

Phone: +61 3 5941 3223

Address: Tarmac Way 3810 Pakenham, VIC, Australia

Website:

Likes: 6090

Add/Update information

Reviews

Tags

• Automotive, aircraft & boat
• Automotive manufacturer
• Vehicle customisation shop
• Motorsport shop

25.01.2022 Alan’s Camaro shaping up to be one badass street car!! Back half 4 link chassis custom designed in house by us still retaining a near on standard backseat just narrowed a bit, connected all the way through to the front, 315x radials, 4.5l whipple blown 434ci dart based ls engine, Reid powerglide, Race products floaters and sheet metal housing, gazzard bros anti roll bar, Afco shocks, fully engineered. Ride height still needs to come down in the back and up in the front. All painted in factory butternut yellow, Hanging to see this thing all together and running!

24.01.2022 Some progress on John’s XW back half 315 car

22.01.2022 The guys at C&A Auto Fashion sent down Dave’s vl Calais for a 6 point bolt in andra cage, to make it completely removable and run through the dash, we’ve also had to modify the dash frame making a removable piece to be able to get it in and out.

22.01.2022 Moe’s Nice vh sle in from garage worx service Centre for an anti roll bar, setup afco coilovers, shorten diff to make the 19x13 Simmons fit and factory commodore brakes on 35 spline axles, and mount 2 kirkey seats

20.01.2022 For anyone who’s interested, head over and give our other page a like, and as always if we can help out with anything, feel free to shoot us a message on here or on there. We offer 1 off parts or multiple parts, if you don’t have a dxf/dwg drawing we can draw it for you, we just need dimensions/sizes or a template to work too. Thanks... https://www.facebook.com/NextGen-Plasma-Cutting-100120218927377/

20.01.2022 Cutting some 12mm thick stainless header plates for a turbo header build we are about to start

19.01.2022 Our new cnc plasma cutter being installed, this should help out with workshop efficiency, now we will be able to cut all our custom chassis rails, brackets of all kinds and pretty much anything steel, stainless and Aluminium up to 16mm and 1500 x 3000

19.01.2022 Leightons impala came back a little while ago now to mount the Big block Chev, trans and Procharger setup, we have only just got a chance to get stuck into it after it had been patiently waiting. Engine and trans are mounted with 1 off mid plate and engine plates, designed and cut on our cnc plasma, we have began mocking up and measuring up for the steering rack and pinion conversion, we will be building some stainless headers for this beast also and doing a transmission tunnel to allow clearance for the carbon shaft that will go in. Looking forward to the finished result of this one We are still extremely busy in the shop still, getting through some of the jobs, we are just jammed in with big jobs at the moment so please be patient as we work through them.

19.01.2022 Something we have been working on in the background, Glen Forster’s Promod mustang has come in for an extensive list of work to be done to get it ready for some testing. We have setup and fitted his engine, transmission and turbos. Re designing together new mid and front engine plates, turbo mounts. We have also fitted his racetech seat which required a lot of modifications to the cars rollcage to suit his driving position, re setting up the pedals, changing parachute lever ...position, basically changing anything that needed changing to get him comfortable in the car. We have cut some new stainless header plates and are about to begin fabrication of the hot and cold side of the turbo setup. Along with a long list of other jobs, fabricating and mounting a new fuel tank, mounting of dry sump tanks, oil pump etc. We are looking forward to seeing this machine hit the track very soon...

17.01.2022 So we decided to take over the factory next door as well... watch this space!!

12.01.2022 Our cnc plasma is up and running, here we are cutting some 6mm mild steel diff brackets

12.01.2022 Thanks to the guys at Speed Pro for organizing more Racetech seats for 1 of our builds, Racetech seats are the ultimate seat for comfort and safety with a good range to suit different applications

11.01.2022 It must be time to get started on our own build after gathering up a few bits to get started, our euro trash bmw e46 coupe will have a 540ci dart based big block Chev, twin 94mm precision promod gen2 turbos, t400 trans, modular rear end, it will be a full tube frame dedicated race car sitting on 15x14 billet specialties fitted with 315x radials

08.01.2022 A quick video of a 6061 1/4 mid plate we designed and cut out for a big block Chev for one of our jobs in the shop at the minute on our new cnc plasma

07.01.2022 This weekend we had James’ senator back at the track, with a consistent string of 8.40s throughout the day and a p’b for the car of 8.41@165mph with a boost cut up the big end. A few changes and we will be back out again.

02.01.2022 Deans Rx7 coming along, pretty stoked with how this one is coming up, hanging to finish this little pocket rocket up and get it to the track!!

01.01.2022 Our good friend James is putting the feelers out on his VZ Senator, consistent 8 second car, with the best of everything in it. Shoot him a message if interested