Nonna's Kustoms in Melbourne, Victoria, Australia | Motor vehicle company

Nonna's Kustoms

Locality: Melbourne, Victoria, Australia

Phone: +61 422 600 200

Address: Thomastown 3074 Melbourne, VIC, Australia

Website: http://nonnaskustoms.com

Likes: 615

Add/Update information

Reviews

Tags

• Automotive, aircraft & boat
• Motor vehicle company

24.01.2022 Another rust repair job we completed a few weeks back. We rebuilt a lot of the cowl area and front nose as rust damage was quite severe in these areas. Very happy with the result

24.01.2022 Brendan's VC 5.0 efi show cars been off the road for 14 years. The task was to sort out the ecu and bring it back to life. After a few days we got the go ahead to make a whole new body loom fit the vn brake booster etc for RWC. If you have a engine conversion you've always wanted to do please ask, we can help

24.01.2022 A quick weekend fab job for our friends at White Speckless Cleaning. A custom folding ramp for getting the heavy steam cleaner in and out.

22.01.2022 Our friend chris dropped off his rx7 for a full rewire after having constant starting and other issues. While we had it we also moved the surge tank out of the cabin sealed up the boot and other things that made the car less enjoyable.

21.01.2022 Stevens cammed maloo in for a set of exhaust cut outs. It was a tight fit, but we got them fitting snug under this beast

20.01.2022 Just finished up the 2.5" stainless vband exhaust for the Mercury. All passing through the chassis so it can lay frame

19.01.2022 Daves Rx4 came in for a service before its power tune on 16psi 98. While we had it we installed a central locking kit with alarm,immobiliser, turbo timer, boot release and gps. The running gear from the engine build, wiring , piping and tune was all done in house. Any rotary enquires please ask.

18.01.2022 Luke's VS commodore in the build. We shaved all un-used holes, top's of the frame rails and even deleted the factory battery tray. All sprayed up in preparation for an LS1 conversion

17.01.2022 Another round of work for Stevens Maloo. A vortech supercharger with front mount intercooler and a custom fuel pump setup with injectors pushed the ls3 up to 460kw. Unfortunately we had to GEEDWN when the diff grenaded coming off the line at heathcote, fortunate enough for Steven we were able to swap out the diff over the weekend ready for work on Monday.

17.01.2022 The freshly painted Alfa got its motor back in today. Going to be a very tidy car

17.01.2022 Deans VL turbo conversion Patrol which came in for what was supposed to just be a plug and play Wolf ECU job ended up needing a fair bit of tweaking when nothing was wired or setup correctly. Over a few days we had the car turn key and ready to roll onto the dyno. If anyone is unsure if an ECU is the right choice for them feel free to contact us prior purchase and we can help point you in the right direction.

16.01.2022 A design+fab job we did for a customer. A custom electric winch and i beam set up for lifting and tipping paint into a milling machine. We also made a cradle to tip the bowls once in position. Worked out very well

16.01.2022 Some extensive rust repairs we did on a XW falcon for our friends at Melbourne Custom Paint. These very popular falcons are prone to rust. Good patch panels are only available for some areas. All the others have to be fabricated from scratch.

15.01.2022 Today we finished a very custom project for a good customer. Melton wanted a 1 off trailer he could tow behind his very unique 1938 Ford. From some very rough sketches and a load of rusty old parts, we worked together to build this highly detailed trailer. Its running a 1938 ford transverse leaf front end, coupled to a torque tube draw bar, and 1938 coupe ute guards, finished in blackbutt timber. ... So many hours went into this eye catching design, cant wait to see it at some shows!

14.01.2022 Body off Huberts Mercury for final chassis welding and powder coating

14.01.2022 Currently fitting a tail section to this 1936 Ford. Slowly pulling it from the abyss

12.01.2022 A few custom exhaust builds we completed. A Holden HZ and a 1969 Mach1 mustang

10.01.2022 The 36 has a heart 6.2 Litres of LS3 the question is one snail or two?

09.01.2022 More extensive rust repair surgery on this F100 cab. We replaced drip rails, lower 1/4's and even the floors.

09.01.2022 Our good friend sent us a very special rx7 in pieces expecting the worst, as he was told all symptoms pointed to a rebuild. A ECU rewire had it starting and running off the key. A wideband got installed and a quick plug in with a laptop got it running back to its former glory. We then progressed to putting the pieces back together fixing prior and future gremlins as we went along.

08.01.2022 A trade set up we built and installed in 2 identical vans for an electrical business. Storage racking + Dedicated tool storage area

06.01.2022 A fold off steel rack built for this camping trailer. Just in time for the xmas holidays

06.01.2022 We are happy to announce our new premises in Thomastown is now operational. Thankyou to everyone who helped with the set up, bigger and better things are already on the cards for 2017 with a dedicated fab and auto elec area, we are sure to help with any projects you have

05.01.2022 The 'White Speckless' cleaning van in for round 2 of its trade set up. We made custom racks and storage for all tools and consumables. Because on site, maximum efficiency = maximum $$

04.01.2022 Drive in drive out race package

04.01.2022 Carmelo got in contact with us about a gremlin living in his Rx3 loom. We decided to rehash under his dash with a custom panel mounted to firewall, extending his microtech loom and mounting bases for the relays etc. The gremlin is now gone along with the ticking coming from the ECU. If anyone needs a kustom install or fault you've given up on, pop in and see us or send us a message.

03.01.2022 Micks rx7 came in with an electrical disaster in the engine bay, we sorted the loom out and while we had it gave the engine bay a nonnas touch with polishing kustom battery mount and tidy up. Also went very kustom with red seats, Defi gauges and Apexi speed logger. A very clean fd back on the streets.