Norton Engineering in Carrum Downs, Victoria, Australia | Metal supplier

Norton Engineering

Locality: Carrum Downs, Victoria, Australia

Address: 12/3 Yazaki Way 3201 Carrum Downs, VIC, Australia

Website: http://www.nortonengineering.com.au

Likes: 225

Add/Update information

Reviews

Tags

• Business service
• Industrial company
• Commercial and industrial
• Metal supplier

25.01.2022 One of the first jobs to roll out of the new premises, a Davit (aka hoist) for a yacht at Royal Melbourne Yacht Squadron.

24.01.2022 A few photos of a dual swivel chart plotter housing/mount for a Raymarine Axiom 12 unit. All stainless steel 316 polished, with the unit flush mounted to conceal all the electrical cables. Unit can swivel on two axis to be able to be used both inside the cabin and at the helm of the catamaran.

23.01.2022 A little frame we designed and fabricated to surround a large tree to create a seating area on this home in Brighton. Came up a treat!

22.01.2022 A couple of photos of a few stainless steel architectural frames we fabricated for a shopping centre playground.

21.01.2022 Photo of a couple of double fender baskets we fabricated for a Beneteau motor yacht, then welded on site. Tight deadline with the boat heading up the coast the same day.

21.01.2022 Before and after photos of a repair on a Caribbean after it had a bit of a bingle. All done on site as removing and transporting the rail would have proved costly and difficult.

20.01.2022 Couple of photos of a architectural gate/door we designed and fabricated for The Blacksmith Bar in Richmond. Cad designed and laser cut with a solid 25x25mm outer frame.

20.01.2022 Photos of some of our recent Balustrading work for a park entry at a recent land development.

20.01.2022 A few photos of a set of some architectural screens we fabricated for a bar in Richmond.

19.01.2022 A few photos of recent balustrading work we completed. Added a few mild steel posts to match existing, and 10mm stainless steel rods throughout to make the area safe and secure for children.

19.01.2022 A couple of photos of a high capacity/volume dive compressor we fabricated for a customer recently.

18.01.2022 A few photos of our recent work! Been a busy few months keeping up with the Christmas rush!

18.01.2022 Pictures before and after paint of a frame we fabricated and installed in a new bar opening in Richmond shortly. Finished photos to follow!

17.01.2022 Been a busy few weeks completing 60 or so of these handrail panels. 9 tonnes of steel, 8500 welds and a fair bit of prep work, happy to see them delivered today! Looking forward to seeing the finished product at a new land development.

17.01.2022 Start of a new project. Removal of an old Vacuum pump, modifications to the mount to take 3 replacement units, followed by running a new 3 inch stainless vacuum line through the ceiling and to a cryo-vac machine.

17.01.2022 Happened do drive past these steel table tennis tables we completed last year. Great to see them painted and installed! These weighed in at 750kg each!

16.01.2022 A few photos of a architectural pool fence we recently designed, fabricated and installed. Made entirely from stainless steel and powdercoated for longevity. The curved section also included a drop of 120mm to comply with regulations due to the step on the veranda. Very happy to see it installed and looking forward to seeing the landscaping completed!

16.01.2022 An on site 800l diesel tank we recently fabricated and fitted!

16.01.2022 A few photos of an architectural pool fence we designed, fabricated and installed. Made entirely from stainless steel with a powdercoated finish, for longevity. The curved section also required a drop of 150mm to comply with regulations due to the step at the veranda, making things a little tricky but very happy with the result. Looking forward to seeing it once landscaping is completed!

15.01.2022 Our new website is online @ www.nortonengineering.com.au, check out some our latest work and the services we can provide!

15.01.2022 Start of a new project. Removal of an old Vacuum pump, modifications to the mount to take 3 replacement units, followed by running a new 3 inch stainless vacuum line through the ceiling and to a cryo-vac machine.

15.01.2022 A few photos of a architectural pool fence we recently designed, fabricated and installed. Made entirely from stainless steel and powdercoated for longevity. The curved section also included a drop of 120mm to comply with regulations due to the step on the veranda. Very happy to see it installed and looking forward to seeing the landscaping completed!

14.01.2022 Couple of stainless steel powder coated planter boxes we fabricated.

14.01.2022 Replacement rudder for a Couta boat all installed!

13.01.2022 An installation of these Corten weathering steel planter baskets in Elsternwick. Made from 1.6mm thick sheet and ranging in sizes from 400-700mm diameter. If you would like to purchase one of these for your garden or outdoor area please get in contact!

13.01.2022 Stainless steel rubbish collector for a food and beverage sewer pit. Featuring a nitrile rubber gasket.

13.01.2022 Rear rail on a power boat we recently fabricated and fitted.

13.01.2022 Another project we completed prior to the end of the year. 5000 litre custom stainless steel Interceptor for a restaurant in the CBD.

12.01.2022 Happened do drive past these steel table tennis tables we completed last year. Great to see them painted and installed! These weighed in at 750kg each!

12.01.2022 Vacuum line all done and commissioned.

10.01.2022 Replacement powder coated stainless steel boom vang attachment for a yacht after the original cast aluminium part failed. All 316 with bronze bushings. Reverse engineered from the casting to match holes and shape.

10.01.2022 A little stainless steel hand rail we fabricated and installed.

09.01.2022 We are looking for an apprentice to start next year in the metalworking industry, to enroll in a Certificate III mechanical trade Based in Carrum Downs. Will consider mature aged. For more details please send us a message.

09.01.2022 Before and after of a slip on exhaust tip to keep the soot off the transom of this yacht.

08.01.2022 A little fireplace cover we fabricated for a nursing home, perforated steel powder coated black.

08.01.2022 A few photos of some our recent work.

05.01.2022 A nice little yacht piece we fabricated from stainless to replace the anodised aluminium original after it corroded and was chafing the ropes.

04.01.2022 A few photos of a BBQ mount we fabricated for a Beneteau Yacht. Featuring a adjustable friction hinge.

04.01.2022 Photo of a table frame we designed and fabricated recently, mild steel powder coated white.

03.01.2022 A little bit of WOS (workplace organisation and standardisation) hanging a couple of trays and adding shelves to a food pack out area! Get in touch if your workplace could do with a tidy up and increase in productivity.

02.01.2022 Custom fab work to mount a universal joint GPS on a new Beneteau.

01.01.2022 After a busy end of the year moving machines and organising things, we have now moved into our new workshop at 12/3 Yazaki Way, Carrum Downs. Merry Christmas and a Happy new year to all our customers!!