One Shot Directional Drilling Australia Pty Ltd | Commercial and industrial

One Shot Directional Drilling Australia Pty Ltd

Phone: +61 400 905 524

Add/Update information

Reviews

Tags

• Businesses
• Industrial company
• Commercial and industrial

25.01.2022 Mark Way, Mudgeeraba 66m x 63mm communications conduit (+ 5 pit installation) @oneshotdd

25.01.2022 Installing a 180mm water main amongst a heavily congested bank of services for a new industrial complex at Molendinar on the Gold Coast. @oneshotdd

25.01.2022 50m x DN250 PN16 SDR11 PE100 Installing a 250mm rising sewer main under a main road at Casuarina in Northern NSW. Experienced some challenging ground conditions as this area is renowned for it's very dry and fine granular beach sand. @oneshotdd

20.01.2022 Upgraded a 125mm water main along Currumbin Creek yesterday....... not a bad backyard to be working in!

17.01.2022 Delivering a 110mm communications bore pipe under a footpath in rebar mode - 65 metres in sandstone. Parkinson, Brisbane.

14.01.2022 Installing a 100mm sleeve for a new water service via Horizontal Directional Drilling on the Gold Coast

14.01.2022 110mm electrical residential upgrade having to bore under the road and linking to electrical pillars either side of the road. - Eight Mile Plains, Brisbane.

13.01.2022 Currumbin Waters, Gold Coast 60m x DN355 PN16 HDPE Sewer Rising Main Job Duration: 2 days We were contending with tidal changes and ground water due to the bores proximity to Currumbin Creek and difficulties associated with drilling in sand. Were required to drill under a proposed DN1500 stormwater at depths of 4.2m and crossed under a live, asbestos DN350 sewer rising main.

13.01.2022 Installing a 110mm electrical conduit via a HDD under road bore for a new flood alert sign in Clagiraba on the Gold Coast.

12.01.2022 Back up to Calamvale, Brisbane to complete our project in Benhiam Street. 3 x HDD road crossings - installing 110mm carrier pipe (sleeves) for new water services.

12.01.2022 Limited access for a 4way electrical / communications under road bore to upgrade power for a new subdivision in Calamvale, Brisbane. Was a tricky bore to navigate, needing to drill over the stormwater and under the water main - both under the road with not alot of room for error!!!

11.01.2022 Installing a new 110mm sleeve for a new water service via HDD through rocky ground at Worongary on the Gold Coast.

10.01.2022 110mm electrical bore in very dense rock - some of the hardest rock we have drilled! 17m road crossing with a 600mm diameter stormwater in the middle of the road with an invert of 1.4m (successfully drilled under at 1.8m and hit the exit at 1 metre). Great effort in those ground conditions with little room for error over such a short distance.

10.01.2022 Installing a 40m section of 110mm communications pipe under a thick, industrial concrete driveway for a busy factory in West Brisbane via horizontal directional drilling. Telstra to install a new optic fibre.

08.01.2022 44m x DN250 PE100 PN16 SDR11 Rising Sewer Main - Casuarina, Northern NSW. HDD was the chosen methodology to bore under this dry creek bed in such an environmentally sensitive area. Not only were we faced with challening ground conditions (groundwater / fine granular sand) but we also had to bore underneath a 450mm trunk main, a 150mm sewer rising main, 2 banks of HV & LV electrical conduits and a major fibre. @oneshotdd