PST Performance Automotive in Slacks Creek, Queensland, Australia | Metal fabricator

Click/Tap
to load big map

PST Performance Automotive

Locality: Slacks Creek, Queensland, Australia

Phone: +61 7 3208 7451

Address: 11 Brennan Street, Slacks Creek 4127 Slacks Creek, QLD, Australia

Website: http://www.pstauto.com.au

Likes: 2204

Reviews

Tags

Click/Tap
to load big map

25.01.2022 Out for a cruise this morning with good people

25.01.2022 Here’s Tony knocking the skins off the big Hj, he drove the wheels off it all 3 days, hot lapping it every day.Tony finished 5 in the 275 outlaw limited class which was a great result, looking toward to the street machine drag challenge to do it all again

24.01.2022 New heart for the torana has arrived, we will flip a nice cam package into into it and fit the cross ram injection then shoehorn it back into the hatchback

22.01.2022 Had this beautiful Hk coupe in built by Pats Pro Restos to sort a couple of minor leaks, this would have to be one of the nicest coupes in the country. Blessed to get to work on some of these quality cars

21.01.2022 Efi conversion time, Ill post-a few pics as we go, # ford Cleveland

20.01.2022 Big block timethis combo arrived today from Dandy Engines. Time to shoe horn it into Louis chevy

20.01.2022 Myself and Ray(Rayje carbs) had the pleasure of playing with this big girl on the Dyno. Gave us a good fight but got on top of it . Car was built by Fakes engineering sporting a Toca power plant,

20.01.2022 Hi Everyone, just a quick one to wish everybody well during these crazy times. We are open and fully operational at this time. We are looking at ways we can help the community with repairs and maintenance on there cars and will post up something in the next 24 hours. We are looking at a no contact type of service at a special rate to try help out . Keep you guys posted and if there is anybody who needs anything in these tuff times please call us, we need to stick together and see this through. Remember to support all local businesses, friends, family neighbours. stay safe

19.01.2022 Efi conversion we recently completed on kens 66 f truck, started as a car by Cleveland and left with a Holley terminator full spark and fuel control efi system Cleveland

19.01.2022 Here’s a quick clip of Paul and Simone’s Camaro, in for a check on the tune and a service , we made a few improvements on the carb so it should drive nicer on the road and save a little on fuel, another beautiful car.

19.01.2022 A clean SS Commodore in for some repairs today, nice to see such a clean example

18.01.2022 Check out this bad ass

18.01.2022 Had a good day at the track yesterday with the lads. Greg racing this hot rod, backed up last years meet with another win

17.01.2022 A little ( actually not so little ) upgrade on Tonys Hj, after a little bit of testing we found we could achieve better results with an Intercooler upgrade, being as it spends 99% of its life on the street, cooler intake temps with a little more boost will keep it reliable which ultimately is our number one goal

17.01.2022 Had a great morning with the lads at the track, Pat was out having a play with his set up, was good to see him and stockr having a skid, it’s been a while, getting the big girl ready for drag challenge

16.01.2022 Had a d a few scary moments out at Warwick today , lucky we kept it of the wall, didn’t manage to get the numbers we were chasing but still kept it respectable with a 5.68 at 130mph.road trip back to Willowbank in the morning and get after it

16.01.2022 The Count Down Has Begun!! 8 DAYS To Go!!!! Entries Close 31st August 11pm!!! PST Hoody & Shirt!

16.01.2022 Tony knocking them skins off and sending his Hj down for a run, this car is awesome, drives it everywhere and doesn’t really spend much time on the track but when it does he hot laps the big girl run after run. Always good road trips with this lad

15.01.2022 Another manifold to mill , Darren in his happy room

15.01.2022 We Are Here to Help. $139Community SERVICE Special Contact FREE 0732087451 We Come To YOU

15.01.2022 Feel Free to Book through Facebook Messanger! Have a fantastic Weekend !!!

15.01.2022 Ls into toranaout it comes for a birthday, very sqeezie fit

14.01.2022 Had a mixed day at drag Challange today, had a great time but got after it on the last pass trying to get our first 7 second pass and the turbo let go, we finished with an 8.12 at 174mph, thanks to Jacob and Ricky and all the lads, we will be back bigger and better

13.01.2022 So this come into the shop this morning, got a noise in the brakes.probably the worst Ive seen in a long time. Please folks dont ignore a noise, better to get it checked out

13.01.2022 Hi everyone, here are a couple of cabin filters we have checked today, these are your filters that filter the air into the cabin of your vehicle, its important now more than ever to keep these clean and hygienic in these nasty times

12.01.2022 Doing a clutch today on a light truck, pretty sure they got every last little bit of life out of the old one

12.01.2022 Darren has made a nice set of pipes for the Peugeot

11.01.2022 Silkys hotrod headed back home, time to put some laps on the old girl, just needs a set of sticky Tyres now

11.01.2022 Efi conversion on Louis caprice tank coming along nicely. Jacob getting it sorted ready for its efi big block

10.01.2022 A bit of fun on the lie detector today, volume up

10.01.2022 Got silkys radiator today, PWR has gone a cracker job as always, will fit it tomorrow and hit the road for a test run

09.01.2022 A little under car porn to keep everyone motivated

09.01.2022 In it goes, we are going to dress it up real nice, going to be one cool ride when shes done

08.01.2022 We are chasing a qualified Auto Electrician to join our team. Immediate start available for right applicant. Please email resume to [email protected] or call during business hours.

08.01.2022 Anyone chasing a process west stage 3 Intercooler to suit an fg falcon we have one here to sell, was purchased for a job that has now changed direction, its brand new in a box, we can fit it as well if required

07.01.2022 One of the best car events I have ever been involved in. Shared this to juice up Pat,one bad ass hot rod

06.01.2022 First pass today was our best, tried to put a little more to it but buzzed it out of the hole, road trip to Warwick was a success so try again tomorrow

06.01.2022 Louiss caprice (aka chapo) recently completed with a dandy engines big block Chev, everyone in the shop feel in love with the big girl over the build, nice to work on something a little less mainstream. This bad boy is running a Holley sniper fuel only efi system and so far we gave been happy with the results. Louis has been upgrading the car since he owned it and its getting better and better with each go, definitely a bit of a sleeper First pic is the start of the engine upgrade

05.01.2022 Had a cracker weekend with lots of good people, drove the wheels of the Prem, Jacob and Ricky got us across the line all 3 days and we managed to come home with the win again, we also picked up a trophy for the wildest ride which isn’t one we really want. Time for a little maintenance and get the old girl ready for the street machine drag challenge

04.01.2022 Manifold ready to go, wire in Holley efi tomorrow,

04.01.2022 Let the games begin

03.01.2022 Just a quick update to let everyone know we have renewed or distributor agreement with Procharger. Anyone needing anything please feel free call or drop a message

03.01.2022 Out for a cruise rain hail or shine

03.01.2022 PST Giveaway goes to Simone Carius and Jason Wenham! Come on down to the shop or give us a call. Thank you to all that entered!

02.01.2022 Sorry Louis, with all that engine in there the bonnet just wont closeguess we are going to have to rethink the whole sleeper look now

01.01.2022 PST GIVE AWAY!!! Simply - Like the PST page Share this post& Tag 3 Friends in the comment below and you are in the draw for a PST Shirt or Hoody!!! Will draw the lucky winners at the end of the month!!!

01.01.2022 Bretto was steering the wags, we were sneaking up on it and it was coming together and then we cracked the case on the gearboxguess we found its limit, we will get a Reid case and bring it back out and keep pushing, it went mid nines at 144 mph with plenty left in the tank, big thanks to all the boys at the shop for there efforts with a late decision to get this going, massive thanks to Tricky Ricky for the effort as well, can’t wait to see where this thing can go

01.01.2022 Pick your poison both would look good in the shed hey , couple of nice examples in the shop today

01.01.2022 This is definitely one of my happy places.

01.01.2022 Angelos neat Torana in for some steering and suspension work,ride height reset and then onto the rollers for a tune

PST Performance Automotive in Slacks Creek, Queensland, Australia | Metal fabricator