Raslarr Engineering in Lilydale, Victoria, Australia | Shopping & retail

Raslarr Engineering

Locality: Lilydale, Victoria, Australia

Address: 5/122-130 Beresford Road, 3140 Lilydale, VIC, Australia

Website: http://raslarr.com.au/

Likes: 21278

Add/Update information

Reviews

Tags

• Shopping & retail
• Vehicle parts store

12.05.2022 Did you know we do Jerry / gas bottle holders. These give u the option of two 20L Jerry cans or one Jerry, one gas bottle. They’re steel construction with multiple fixing spots for your cargo to meet gas bottle carrying laws. These are available on all RASLARR rear bars and come standard with mounts for our optional self

22.04.2022 Couple of very slick new style 200 series rear bars fitted up . These are now a full one piece design so install is considerably easier then ever.These have had many upgrades in the last few months and we couldn’t be happier with the end result.

17.04.2022 PHONES DOWN! We are filming some instructional videos today so we will be not answering calls. Please email all urgent Enquiries to [email protected] DOWN! We are filming some instructional videos today so we will be not answering calls. Please email all urgent Enquiries to [email protected]

29.03.2022 Toyota 300 series sliders are not far away

16.03.2022 300 Series Front Bar First trial fit of our new 300 front bar has gone extremely well. A few revisions to come but we are very happy with what we have produced. We have focused heavily on increasing airflow to the coolers without changing our signature look. We have improved our existing design by adding radius corners, inbuilt recovery points and have kept the original plastic cooler ducts in place. These bars will come with ... -Plug and play loom kit for sensors -30 Light bar provision -In built recovery points -Stedi fog lights -Full side bash plates for intercooler water pump protection and centre bash plate to connect to the under body protection. -Camera relocation -Will fit any low mount winch We have a huge list of improvements for the front and rear bars now that they have been tried and tested over a period of time. The new and improved versions will be on in the next couple of weeks and then production will commence! The big question is, should we do a headlight hoop version?? And yep, it definitely needs a slimline number plate

24.02.2022 Very clean Gu fitted up with our new spec rear bar and dimple die Sheetmetal feet rock sliders. Complete with our max trax holder. Proudly 100% Aussie made and owned

20.02.2022 CLOSED FOR THE LONG WEEKEND

06.02.2022 https://www.facebook.com/152063128163732/posts/5003421696361160/?d=n

24.01.2022 Sneaky peak on a new product for the y62 range we are trialing . These will suit Blind spot and rear winch . Just another project to try when we get let out of vic jail again. Hope everyone is travelling well

23.01.2022 Another year done and dusted! Huge thanks to every customer in our toughest year yet. The team will be away from today until the Monday the 11th of jan. We will do our best to check in on emails as much as we can while away.... Merry Christmas and a happy new year to all ! So proud to be 100% Australian made

23.01.2022 New project we are working on with the Livn 4x4 boys. Our online fitting instructions!!! So far we have our GU Rear Bar and Rock sliders and rails instructions up on Youtube and are working on the Y62 Patrol next. If you haven’t already, check out the Reed boys over at Livn 4x4. https://youtu.be/CzgxaDw3rM0 https://youtu.be/7Go99xJ8Kwg

23.01.2022 We have had to expand our office white board slightly to keep up with everyone’s orders on the go atm. Did you know we can customise your sliders with your own logo or wording. Australian manufacturing at its best

22.01.2022 New Product , first 3D printed sample of our new stub covers we have been working on. These will be available very soon

20.01.2022 Some nice Y62 action courtesy of @zacy_62envy #raslarrengineering #y62patrol

20.01.2022 S&M engineering for all your vic roads certification needs .

19.01.2022 FAT TD was in for an old school tube tray this week to complete its Raslarr barwork. Has to be one of the coolest Gu patrols I’ve seen in a while.

17.01.2022 -- ANOTHER COVID-19 UPDATE -- In compliance with the Victorian Stage 4 COVID-19 restrictions, Raslarr Engineering has implemented the following protocol: We are open and operating at a reduced capacity. By operating at a reduced capacity, the office will be closed onsite and working from home. The office can still be contacted on (03) 9736 4932 as well as [email protected]... Bookings that are to be freighted will run as normal. Pick up can be arranged following the 'click & collect' style protocol i.e. contactless. There will be no public access within our factories/offices and customers are asked to phone prior to entering. Unfortunately there will be no jobs to be fitted for the next 6 weeks. All existing jobs will be placed on hold until after the lockdown. Raslarr has implemented our COVID Safe plan and adhere's to all requirements in regards to operating safely and in accordance with the Governments guidelines. We would like to thank all of our loyal customers and suppliers for their continued support through these tough times, and everyone here at Raslarr wishes you all the best. Stay Safe!

17.01.2022 WELCOMING RASLARR MERCH All new merch now available. We have a small amount of stock available, shoot us a message! Following this we will be doing monthly preorder through our new website coming soon! PRICES:... - HOODIES (Adults $ Kids) $70 - MENS & WOMENS SINGLETS $45 - TSHIRTS $40 - POLO $45 - PUFFER JACKETS $110 - BEANIES $25 See more

17.01.2022 Great news So in a complete backflip the vic government has decided to change its mind today and steel manufacturing can continue under new Covid rules . So at this point we believe we are back to business as Covid usual tomorrow. Sorry for all the confusion and we will keep everyone posted as final details come to light hopefully tomorrow

16.01.2022 Another awesome build from ontrack featuring one of our sexy rear bars.

16.01.2022 ~~~POWER OUTAGE~~~ We’re currently experiencing no power here and we are unsure when it will come back on. We ask for all enquiries today to be via email. ... Apologies for the inconvenience.

14.01.2022 Flash back of the 200 series . https://youtu.be/UkJxogVVfjI

13.01.2022 Melbourne Cup Day With restrictions starting to ease, fitting is slowly starting to recommence (if you live in the designated radius of course!) Below are some photos of a few jobs that have gone out the door in the last couple of weeks . Thanks for all the support during this crazy time, Rob

13.01.2022 Another one of our Y62 S5 rear bars fitted by ontrack 4x4 . Amazing work as always. https://www.facebook.com/324826520994420/posts/2057248634418858/?vh=e

11.01.2022 POWER OUTAGE. We currently are experiencing an unexpected power outage at our workshop. Please email through your enquiries or Facebook. ... Apologies for the inconvenience.

11.01.2022 Good morning Guys and Gals! Due to the power outage, unfortunately we are closed. If you need to reach us, please shoot an email to [email protected] Cheers! Good morning Guys and Gals! Due to the power outage, unfortunately we are closed. If you need to reach us, please shoot an email to [email protected] Cheers!

10.01.2022 We’re all tracking well down here in Dan’s prison camp(Victoria!) In saying that, this is one of the busiest times we’ve ever experience in Raslarr history. So please bare with us in regards to emails, production etc. We are currently booked until late November. We’re hoping to get this lead time down a bit as we progress through the rest of the year. However if you’ve got plans for when we’re all allowed out (aka Christmas holidays) please ensure you let us know as soon... as possible so we can do our best to accomodate. All custom work is already fully booked for this year. So any enquires for custom, please be aware it will be sometime in 2021. We hope everyone is staying safe!!

10.01.2022 All orders for hoodies will be finalised on Friday. if you're wanting one, please call, email or DM us !!

10.01.2022 RASLARR NATIONAL JUNIOR TITLE As many of you will know, our family are heavily involved in junior speedway. We are extremely proud and excited to be this years major sponsor for both the Junior National and State titles held at our home track of Alexandra! Both of our boys, Linken and River will be competing in this. With 60+ junior entries Australia wide so far, we are going to be in for an amazing event. ... Ash Media will be live streaming the event for free so everyone can watch. Otherwise, get down to the track to support the next generations best racers, and our sponsored event. Cheers to Alexandra Speedway National title dates: 8, 9, 10th of April State title dates: 15 & 16th of April

09.01.2022 Hi all , we hope everyone is travelling well in this crazy COVID period. Here’s just a few of the many jobs we have fitted up recently. We are currently experiencing a huge influx of enquiries and we are doing our best to keep up with them all, but we are struggling, so hang in there! Currently, our lead time is 12-14 weeks on most products and we are trying to improve on this. We have been lucky enough to secure another skilled welder to grow our team to 8 full time employees and we are very proud to produce 100% Aussie made products. Moving forward we are looking to expand our 60mm slider/scrub bar range for some of the newer models. Thanks to everyone for your patience and business in this very crazy world we currently live in. All the best, Rob.

08.01.2022 ------COVID-19 UPDATE ---- As most of you would have heard, parts of Melbourne have been forced into a 6 week lockdown. Unfortunately the category of manufacturing (us) falls into one of the businesses that need to close. As of Wednesday 5th of August at 11:59pm we have to close our doors and cease all manufacturing. The office will be 'working from home' with reduced hours (Mon-Fri) so if you do need to contact us, email is preferred.... NEW OFFICE HOURS: 11am - 1pm (Monday - Friday) All existing jobs, fitting or manufacturing will be put on hold until we reopen. Upon reopening, we will pick up from where we left off. You will all be contacted via email over the next few days. If anyone feels the need to cancel or postpone their booking, please get into contact with us as soon as possible so we can reschedule work. Unfortunately this lock down is out of our control and we apologise to all customers (VIC and interstate) if this has caused any kind of inconvenience. We're waiting for further information from the VIC Government in regards to finer details. From everyone here at Raslarr, we hope you stay safe and we'll see you on the other side!

07.01.2022 RASLARR IS HIRING We're currently looking for a competent person to join our warehouse/packaging team. This is a full time position with a 3 month trial. Hourly pay at above award rates with a 38 hour week.... Outer Eastern suburbs, Lilydale, 3140. Job consists of: - Pick & packing orders related to 4WD accessories - Managing stock levels - Some heavy lifting involved (2 person lift) - General assistance with the operation of the factory. Skills Beneficial to the Position: - General 4WD knowledge - General knowledge of bolts - Forklift licence (not essential but preferred) If you think you’re suitable for the job or know someone who is, please send your resume to [email protected]

07.01.2022 It was a very exciting day today with the long awaited arrival of our new CNC pipe bender! This machine will allow us to bend up to 3 pipe in house, just another process to help speed up our production time. Our plan is to make all new 60mm slider and scrub rail combinations. Also pumped to welcome another team member to the Raslarr crew as of Monday, bringing the number to 9!

06.01.2022 Finally we have our new stub covers , these are injection moulded and we are exceptionally happy with them. These will be added to our website shortly and we have good stock.

05.01.2022 On a brighter note. Here’s a couple of chops leaving today

04.01.2022 https://youtu.be/5ug4JgC-OiM

04.01.2022 Just an update, we have had a bit of rain and most of the eastern side of Melbourne is without phone , internet or power till Monday so there telling us. We will keep everyone updated as we can but our office will be closed till Tuesday at this stage . There’s 14 trees down on our factory’s road alone . Shoot us an email and we will get back to you when we can. Rain or rona how goods vic

03.01.2022 Customer just sent us these images of our bar work all fitted up and they’re too good not to post up. 25 years on and 80s are still going strong.

03.01.2022 Y62 Patrol Slider video up on Youtube! Thanks again to Adam at LIVIN 4X4 for the video! https://youtu.be/_OdiWTrdO48

03.01.2022 LEAD TIMES UPDATE We are booking Oct-Dec for various products. (Custom work is into next year.) To get in before xmas, please call or email us to enquire. 9736 4932 [email protected] TIMES UPDATE We are booking Oct-Dec for various products. (Custom work is into next year.) To get in before xmas, please call or email us to enquire. 9736 4932 [email protected]

02.01.2022 No1 S4 y62 prototype winch bar, suits 20 light bar , all steel 3 piece design, 51 kg. Few little changes to be made but very close. S5 next And yes I need a slimline no plate

02.01.2022 CLOSED TODAY Just reminding everyone that we are closed today as Victoria has a Public Holiday for the Grand Final we don’t have . Anyway, I hope everyone is travelling well and let’s cross every part of our bodies that we can be let out of jail a little more as of Sunday.

01.01.2022 Final trial fit up of our S-4 front bar complete and ready for production. These can now be ordered through our office at [email protected]. Pricing is the same as our S5 bars at $2,995 with roadsafe recovery points included and will fit Stedi 20 light bar and fogs. Another quick update ,yes we are in lockdown in vic however we are working as per normal but with no fitting.