Riverside Racing in Werribee, Victoria | Vehicle parts store
Riverside Racing
Locality: Werribee, Victoria
Phone: +61 3 9974 0920
Address: factory 19 49-55 Riverside ave 3030 Werribee, VIC, Australia
Website: http://www.riversideracing.com.au
Likes: 2415
Reviews
to load big map
25.01.2022 Question - if you had a glorious sounding high revving v8, too much carbon, a love for aero, and a fetish for rusty old Datsuns, what would you build...? #wtac #afccomposites #ambaero
24.01.2022 One fat ass you can actually be proud of
24.01.2022 Happy days when she comes in milimeter perfect
24.01.2022 Goodmorning all, with this Coronavirus growing in stature over the last few days we will be closing the doors to all visitors for our own safety and yours. We will continue with the projects (have some exciting toys in the shop that we will post up in the near future) in the shop as the Motorsport world we be in full swing once this virus passes! If you feel the need to contact us, call either Liam - 0410 755 964 or Gary - 0425 827 121
24.01.2022 Whilst away at Phillip Island we received one of the last pieces needed for the driveline of our new mustang, custom design bellhousing to suit the layout of the car.
23.01.2022 Motorsprt is a cruel mistress at times, after unlocking alot of dry weather pace on friday, we finally got a crack at a dry track... then this happened. The cars a bit of a sad sight, but there should be enough time to have it repaired for the next round at Queensland Raceway.
23.01.2022 Yellow rocket is starting to look like a car once again, still a mountain of work to be completed but odds are on our side to make it to the bend next week!
23.01.2022 ETS historic 102 octane unleaded getting the job done, our little engine is cranking along at the same speed as the big banger on Agas now #ETSRacingFuels #PoweredByETS
23.01.2022 Bit of tarmac rally a9x for your Friday
22.01.2022 On Friday we headed down to Winton for a test day to sort out a few things with Robbos rocket. With such a bunched up first half of the season, no testing and crazy weather conditions the cars really been behind the 8 ball set up wise. We were lucky enough to get Darren Hossack into the drivers seat for a few sessions and relate some really good feedback that we could work with to improve the car. For someone who hasnt been in the drivers seat of a car like this for quite some time, he was bloody impressive! All in all it was an extremely successful day, we tried a lot of things to which the car reacted really well and displayed some genuine pace, looking forward to QR in a few weeks now!
22.01.2022 Few last minute upgrades on Michael Robinsons Monaro
22.01.2022 The BMW is back in the workshop after a stint down at GR Motorsport Electrics having an m150 ecu and the new paddle shift set up wired in. Big thank you to Garry and crew for squeezing the car in between rounds.
21.01.2022 Looks like the new colour on the BM was a good omen! After a fairly substantial rebuild after smp, Woody gave the old girl some stick and scored his first national series podium for the weekend as well as knocking 3 seconds off his PB! An absolute credit to everyone who was involved in getting it back on track. Marc and Larry Fay from Australian Fibreglass Composites for recreating a hell of a lot of new body work.... Scott Beeton from AeroDesign - Race Car Aerodynamics for the quick turn around on a new rear wing. Landells Signs -Corporate and Business Signs for making it all look pretty! James McCabe from Race Engineering Services for resurrecting the smashed dampers in conjunction with Adam Deborre and well and truly improving them!
21.01.2022 Landells Signs -Corporate and Business Signs have weaved their magic with the new livery, what do you guys think of how its come up?
20.01.2022 The old BM has had a bit of a birthday since Queensland raceway, She was taken back to a bare chassis, paint blasted off, put on a big diet had quite a few aspects refined. Now to get it back in one piece and head off for a test day to put the fresh power plant through its paces before the final round at Phillip Island in November. Wed also like to thank ETS Race Fuel for jumping on board too
20.01.2022 Wed like to congratulate Shane Woodman on another great year in the DEA Performance National Sports Sedan Series, securing 3rd place in the championship in the last race for the second year in a row Wed like to thank a few people who have made this year happen. Simon Ingram from ETS Racing Fuels Australia, Simon has supplied us with all our rocket fuel needs for the past 12 months, with our second engine in the car, its been an absolute testament to his fuel with the ...engines performance narrowing the gap to our race engine on avgas. James McCabe from Race Engineering Services, his engineering world, methodical nature towards the set up of the car has been world class. Mark from M.B.Performance, Mark has looked after our engines from day dot with this car, as we all know the sb2.2 isnt the friendliest of engines to work with but Mark is a bona fide wizard of them, as a side project to racing this year weve had Mark refresh and improve the main engine, cant go wrong with a bit of extra straight line handling. Scott Beeton from AeroDesign - Race Car Aerodynamics, from designing our aero package to sorting wings on very short notice after we aquired some damages, couldnt be more thankful. And also a shout out to everyone behind the scenes running the series, mostly John Gourlay and Michael Robinson, without these guys none of this would be possible. Until next time...
20.01.2022 Always nice to pluck them off the jig
20.01.2022 Nice day for a shake down at the island
19.01.2022 Successful day for us down at the bend with the BM, after securing p6 in a very wet quali and moving up to p4 by the end of race 1, looking forward to push on tomorrow!
19.01.2022 When you cant buy something, you may as well make it! Were excited to finally fit up our prototype individual throttle body manifold to suit a 9.2 deck height d3 headed ford engine. All going well youll see these beauties on the market in the near future
19.01.2022 The new Tilton Interiors Evo 9, the next evolution. Keeping the same philosophy and concept of the old rocket, just a little bit lighter! Its been an absolute pleasure to work with Kosta and the tilton crew, next week the chassis will be sent up to Sydney for them to fit it out till shes race ready.... World Time Attack Challenge
18.01.2022 With such a chaotic start to the season with 3 rounds in less than 2 months weve finally got the yellow rocket back in for some much needed refinement before the next round at Queensland raceway.
16.01.2022 Shes a little battered after yesterday. Replace the front right corner, few new panels, new wing and rack, rack mounts and shes set to go
14.01.2022 Tested, prepped and now shes ready to be thrown in the back of the truck for a month before we head off to round 1 of the National Sports Sedan Series at SMP
14.01.2022 After a successful dyno session on MPCs dyno with the m1 ecu and ETS Racing Fuels Australia jungle juice. Next step was to do some real world testing, however with no track time available on Sunday, we were forceto bite the bullet and let her loose on the local runway to do some systems tuning. Now to prep her and head off to Tailem bend next week! #ETSRacingFuels #PoweredByETS
14.01.2022 One more of the Pony
13.01.2022 Starting to play with the paddle shift
12.01.2022 Last week we received Dave Hobils rx8 back after it spent 12 months at his place, in that time he went back to school via YouTube and learnt all the tricks to making carbon panels, to which he then manufactured and mounted a full carbon body, air ducts and interior!
10.01.2022 Our own toy... something we dont really need but would love to see it on the Sports Sedan grid in the near future. We will continue to build the car but its for sale at any point.
08.01.2022 Just a little reminder, our Mustang is always for sale at any point in time... however it does come with a driver!
08.01.2022 Jump on board for a lap of Sydney Motorsport Park in our BMW with John Bowe at the helm. Was a pleasure to have John beghind the wheel for half a dozen laps, smooth operator!
08.01.2022 For sale - Albins transaxle, freshly serviced, ready to go, even full of oil. 1.13 drop gear set (like a 3.5 in old 9 talk) ... 16k +gst Located in Werribee
06.01.2022 Back on her feet
06.01.2022 Surely that cant be comfortable
05.01.2022 Test day ready
04.01.2022 700+hp tube frame Sports Sedans racing within milimeters of each other, what more could you want? ETS Racing Fuels Australia National Sports Sedan Series Australian Muscle Car Masters
04.01.2022 She’s a pretty one, should look at home in the rusty old datto... #wtac
03.01.2022 When you can’t buy something, you may as well make it! We’re excited to finally fit up our prototype individual throttle body manifold to suit a 9.2 deck height d3 headed ford engine. All going well you’ll see these beauties on the market in the near future
01.01.2022 Cutting it a little fine! weve finally got her fired up and running, now to chuck all the panels on and then the car into the truck to head off to tailem bend tomorrow
01.01.2022 Time to start chucking her back together, new spec power plant in for this round, very different to what weve run in the past, so should be interesting to see how it goes in comparison. Massive shout out to Mark from M.B.Performance for his commitment towards the engine over the last few weeks and Lou from Dandy Engines for short notice dyno time. Now to find a test day before we head off for Island Magic
Related searches
- Adelong Service Centre
Automotive, aircraft & boat Automotive repair centre
+61 2 6946 0673
2 Selwyn Street 2729 Adelong, NSW, Australia
566 likes
- Complete Trucks
Automotive, aircraft & boat Vehicle dealership
+61 3 5821 3214
55 Grahamvale Rd 3630 Shepparton, VIC, Australia
236 likes
- Auto Electrics
Automotive, aircraft & boat Motor vehicle company
+61 425 218 181
Mobile 2290 Newcastle, NSW, Australia
142 likes
- Exmouth Smash Repairs
Emergency roadside service Automotive, aircraft & boat Automotive repair centre Vehicle body shop
+61 8 9949 2468
3 Patterson Way 6707 Exmouth, WA, Australia
399 likes
- Jetski Worx Service, Repairs and Performance work
Automotive, aircraft & boat Marine service station
+61 7 3133 8137
5 Moss st 4172 Slacks Creek, QLD, Australia
521 likes