Australia Free Web Directory

Sketsch | Science, technology & engineering



Click/Tap
to load big map

Sketsch

Phone: +61 411 433 538



Reviews

Add review

Click/Tap
to load big map

25.01.2022 Cut and fill earthworks plan. Useful information for earthwork volumes between Survey Surface and Final Design Surface.



24.01.2022 The Flinders Link Project has achieved a major milestone, completing the installation of 20 steel beam bridge girders which form the base of the elevated bridge... deck. The steel girders range between 30-50 metres in length and form the 10 spans installed as part of the project. Each span required two bridge girders to be lifted into place, each using two cranes. In total, 1,550 tonnes of steel was used to construct the 20 steel beam bridge girders, and all were fabricated in South Australia from Australian steel. The Flinders Link Project will extend the existing Tonsley rail line to the Flinders Medical Centre, creating new connections to the health, innovation and education precincts.

24.01.2022 The Gawler East Link Road is opening next month! This is yet another important project being delivered by the Marshall Liberal Government which will improve s...afety and efficiency for Gawler and Barossa commuters. The $67.7 million project has supported 110 local projects during construction, and will make it much easier for people travelling from Springwood, Kalbeeba and the Southern Barossa to bypass the Gawler town centre and get to Main North Road. Heres a sneak peek from behind the scenes a couple of months ago, which shows just how much work has been going on!

24.01.2022 Earthworks, retaining walls, fences, site access, levels, building pads. Remote locations. When you need accurate drawings so construction crews have everything they need on site get SKETSCH to draw up the plans. A few days in the design office can save days of travel and construction delays. With proper design there is no excavation at the base of the tower.



24.01.2022 Getting into the structural engineering design and detailing.

23.01.2022 Major works for the construction of a roundabout at the intersection of Torrens Street and Crozier Road, Victor Harbor will commence on Thursday, 5 March. Along... with the construction of the roundabout, the works include the modification of existing kerb, gutter and footpaths, installation of LED lighting, new road construction and resurfacing, pedestrian refuges, and line marking. The upgrade will assist to address crashes and improve overall safety at the intersection. The majority of works are expected to be undertaken between 7am and 5pm, Monday to Friday, however some weekend work and night work may be required. All roads will remain open to traffic during construction, with a 25km/h speed restriction in place while workers are on-site. Works are expected to be completed by mid-2020, weather permitting.

22.01.2022 An existing gravel park with historical landmark. Upgraded to sealed parking, caravan parks, lighting and safe pedestrian access.



22.01.2022 You may see others offering rendered images outsourced offshore. They are nice pictures. When you need engineered plans and calculations contact SKETSCH. There is still a rendered 3D image and building model, but there is also the rest of the structure, reinforcement, connections, building code requirements, decades of experience and much more. Call Simon: Mb 0411 433 538 or email [email protected]

22.01.2022 Got a minute? Follow along this quick #Revit tutorial to learn how to build your own custom steel connections and boost your productivity. Find more helpful tips here: https://t.co/exOdqRs1SU https://t.co/rtd9Csxrnb

21.01.2022 This may look like a photo of a street with lovely autumn leaves on trees (and it is) but what is interesting about this street is that it's Mackirdy St, Fulham..., which has recently been resurfaced using asphalt made out of used car tyres! This road has about 200 tonnes of crumbed rubber asphalt mix, or tyres from 600 passenger vehicles! An added bonus is that because it's crumbed rubber it's much less likely to crack like traditional asphalt mixes. See more

21.01.2022 Come along to an info session for the Port Wakefield Overpass and Highway Duplication Project to meet the project team, ask questions and provide feedback about... the project. The info session will be held on: Wednesday, 4 November from 3pm 6pm Eagles Sports and Community Centre, Drake Crescent Port Wakefield The project will reduce traffic congestion on two important State Highways and improve road safety on one of the State’s key intersections. To ensure COVID-19 physical distancing requirements are met, attendees must register prior to attending the Information Sessions by emailing: [email protected] or calling: 1300 161 407.

20.01.2022 In this 5 module series, you will learn the fundamentals of Mobility Simulation. We will cover Industry trends, project examples, Mobility Simulation concepts, ...and the in-product tools to get you started with producing your own simulation models. The course will teach you how to create projects from scratch, perform pedestrian, traffic, and multi-modal simulations. We will also cover reporting and how to apply physical distancing constraints for COVID-19 scenarios. Module 4: Multi-Modal Simulation - Build on Modules 2 & 3 with a Multi-Modal Network. Learn More: https://autode.sk/3355Zvw



17.01.2022 Are you fed up with gravel access ways and car parks? Pot holes, mud and dust? Do you need some help with upgrades? SKETSCH can sketch sketches to develop ideas, help with cost estimates and do the engineering to see it through construction. Contact Senior Civil & Transport Engineer Simon Kretschmer on Mb 0411 433 538

15.01.2022 Planning ahead? Call SKETSCH and get engineered animations. Not just pretty pictures with cost blowouts, but realistic outcomes with engineering data. Design with full understanding.

15.01.2022 Residential: conceptual through to engineering detail Call Sketsch on Mb 0411 433 538

15.01.2022 The many uses of Styrofoam in construction!

14.01.2022 We’re excited to announce that the hybrid+ design is the preferred option to deliver the Torrens to Darling...ton (T2D) Project. This solution will see a combination of tunnels, lowered and ground-level motorways, as well as overpasses/underpasses at key intersections. The hybrid+ design will minimise business, community, social and heritage impacts and, once complete, is expected to save up to 24 minutes of travel time between the River Torrens and Darlington. This final and most complex section of the North-South Corridor, is South Australia’s largest infrastructure project to date and will deliver a 78km, non-stop traffic-light-free connection between Gawler and Old Noarlunga, with links to the port and airport precincts. For more information and to register for project updates, visit www.dit.sa.gov.au/torrenstodarlington

10.01.2022 Some who have been using SKETSCH services to assist their staff have shovel ready projects that are shovel ready. A push for design and documentation on a number of projects, already with preliminary work done for pre-planning and budget allocation, finalised for construction when budgets became available. Sketsch helped bring forward projects that are now ready to go, ready to pick up a shovel to start today. If you are in an organisation that needs help to get projects shovel ready to take maximum advantage of current government funding, give Senior Civil & Transport Engineer Simon Kretschmer a call on Mb 0411 433 538 during business hours.

09.01.2022 Real CAD construction models with full engineering. The civil construction drawing set brought to life for detailed analysis and virtual reality exploration.

09.01.2022 Interested in design collaboration? Join our #AEC experts on November 3rd for a new #BIM360 Design for Revit webinar series: https://autode.sk/3di1QHU #bim360 #collaboration #bim #bimworkflow #revit #revit2021 #autodesk

08.01.2022 Have you seen the updated artist impressions for the Regency to Pym Street (R2P) Project? These latest artist impressions are based on the final project design..., and provide a glimpse into the future showing an illustration of what the upgraded North South Motorway, South Road surface roads, Regency Road overpass, pedestrian and cycling overpass, and landscaping is planned to look like after completion at full maturity. For more information about the R2P Project, visit www.r2palliance.com.au or contact the project team by calling 1300 110 906 or emailing [email protected]

08.01.2022 Laying out ideas.

08.01.2022 Laying out ideas. Right hand turn protected lanes, pedestrian and bike movements.

07.01.2022 Sketsch uses Autodesk Civil 3D extensively, using the latest version and keeping up with the latest industry information.

07.01.2022 Electrical switchroom to Mordialloc in Victoria with Andrew Dawson and Luke Work....5.6m wide , 5.1m high and 32m long on trailer

07.01.2022 Do you need road design? Driveways, subdivisions, council roads, major upgrades, minor streets or private access roads? SKETSCH has done hundreds of km and thousands of construction plans for roads and pipes over 20 years.

06.01.2022 Arthur Radebaugh

04.01.2022 Sketsch is getting up to date with the latest release for AutoCAD Infraworks 2021. It appears to have GDA 2020 has default replacing GDA 1996 so there has been a slight realignment of maps and likely precision update to terrain levels. It won't take too long to resolve

04.01.2022 Seems safe #jerryrigged #automechanics

04.01.2022 As more people return to the workplace, design decisions take on new significance. Whether youre designing for the safe arrangement of desks, the width or spac...ing of aisles, or other needs. See how Generative Design in #Revit can assist to safely re-design the workplace to comply with physical distancing guidelines. Join our #AEC experts for a free webinar on August 18 at 10am PT: https://autode.sk/2OQ691B See more

01.01.2022 Sketsch engineering plans are drafted in 3D using the latest software, aerial photography and site investigation to develop meaningful plans for collaborative design. www.sketsch.com.au, Simon: 0411433538

01.01.2022 Bringing ideas to life. A sketch by Sketsch becomes a 3D model for design, review, engineering analysis, environmental performance analysis, conceptualisation, visualisation, collaboration, virtual reality and 3D printing.

01.01.2022 Need vehicle turn movement checks? Call Sketsch on mb 0411 433 538. https://7news.com.au//adelaide-bus-driver-holds-up-traffic

Related searches