Safety and Quality Management Services in Waitara, New South Wales, Australia | Consultation agency

Safety and Quality Management Services

Locality: Waitara, New South Wales, Australia

Phone: +61 420 405 773

Address: Romsey St. 2077 Waitara, NSW, Australia

Website:

Likes: 58

Add/Update information

Reviews

Tags

• Commercial and industrial
• Consultation agency
• Occupational safety and health service

25.01.2022 AS 2809 Road tank vehicles for dangerous goods This Standard specifies general requirements for all road tank vehicles. Additional specific requirements applicable to particular road tank vehicles are detailed in the appropriate part of the AS 2809 series of Standards. The suite of Standards for road tank vehicles comprises six (6) Parts. The scope of the brief given to the Committee was to review Parts 1, 2 and 3. NOTE: Parts 4, 5 and 6 are to be reviewed at a later date... yet to be determined. The following Parts have been revised by the Committee: Part 1: General requirements for all road tank vehicles Part 2: Road tank vehicles for flammable liquids Part 3: Road tank vehicles for compressed liquefied gases This Standard is intended to serve as a reference Standard for the various statutory authorities administering regulations for the safe transport and handling of dangerous goods, and the wording of its title and its scope clauses have been chosen to align with the Australian Dangerous Goods (ADG Code). SCOPE This Standard specifies general requirements for the design, construction, testing, maintenance and inspection of road tank vehicles, irrespective of the cargo, that are intended for the road transport of dangerous goods. The Standard deals with vehicles that are designed and constructed specifically as road tank vehicles. It is applicable also to conventional vehicles that are to carry portable or demountable tanks or tank containers which are filled or emptied whilst on the vehicle and as a consequence are deemed to be a road tank vehicle. The general vehicle and safety requirements are regulated by the Australian Design Rules (ADR) issued by the Department of Transport and Regional Services and these rules are outside the scope of this Standard. Throughout this Standard the term road tank vehicle is used and has the same meaning as tanker. OBJECTIVE The objective of this Standard is to provide designers, planners, operators and regulators with technical requirements for road tank vehicles transporting dangerous goods. APPLICATION Road tank vehicles intended for the transport of dangerous goods shall comply with this Standard, and with such other Part of the AS 2809 series as is relevant to the special needs of the particular cargo. Where a cargo has two characteristics, e.g. toxic and flammable, or where a road tank vehicle is switched from one cargo to another, the requirements of all relevant Parts shall apply. Source : httpe://www.saiglobal.com

24.01.2022 ISO 14000 - Environmental management The ISO 14000 family of standards provides practical tools for companies and organizations of all kinds looking to manage their environmental responsibilities.... ISO 14001:2015 and its supporting standards such as ISO 14006:2011 focus on environmental systems to achieve this. The other standards in the family focus on specific approaches such as audits, communications, labelling and life cycle analysis, as well as environmental challenges such as climate change. ISO 14001:2015 ISO 14001:2015 sets out the criteria for an environmental management system and can be certified to. It maps out a framework that a company or organization can follow to set up an effective environmental management system. It can be used by any organization regardless of its activity or sector. Using ISO 14001:2015 can provide assurance to company management and employees as well as external stakeholders that environmental impact is being measured and improved. Learn more about the benefits of ISO 14001:2015. There are more than 300,000 certifications to ISO 14001 in 171 countries around the world. Learn more about the ISO Survey of Certifications. source: www.iso.org

23.01.2022 AS/NZS 4801 Occupational Health and Safety Management Systems Why is occupational health and safety important?... The protection of the health and safety of all employees is vital to the success of all organizations. Poor performance in occupational health and safety (OHS) can take a heavy financial toll on any business, not to mention the human cost of work-related illness, injury, and fatality. In our continually changing workplace environment, the effective assessment and management of OHS issues is paramount. How can occupational health and safety be managed? Organizations can help to protect themselves and their employees by implementing an occupational health and safety management system (OHSMS). Such a system helps to ensure that your business: Has an effective OHS policy and objectives Can establish, assess, and review its own OHS procedures Can demonstrate its commitment to OHS to others, via self-declaration or certification. Reduce workplace illness and injury This is the primary aim of an effective OHSMS. The implementation of such a system can also help your business to deal with the legal imperatives, ethical concerns, industrial relations considerations relating to workplace safety, and to improve its financial performance. AS/NZS 4801:2001 is used as the benchmark to assess Occupational Health & Safety Management systems for organizations. Whilst this is an Australian/ New Zealand Standard, organizations in other countries have adopted the requirements. NSW Government Tenders Tenderers for all NSW government construction projects must comply with the NSW Government OHS Management System Guidelines. Australian Government Building and Construction OHS Accreditation Scheme The Australian Government Building and Construction OHS Accreditation Scheme as a prerequisite, the applicants OHSMS must be certified to Australian Standard AS/NZS 4801:2001 Occupational health and safety management systems Specifications with guidance for use Source: www.saiglobal.com/

22.01.2022 ISO/TS 22003:2013 Food safety management systems -- Requirements for bodies providing audit and certification of food safety management systems ISO 22000: specifies requirements for a food safety management system where an organization in the food chain needs to demonstrate its ability to control food safety hazards in order to ensure that food is safe at the time of human consumption. It is applicable to all organizations, regardless of size, which are involved in any aspect... of the food chain and want to implement systems that consistently provide safe products. The means of meeting any requirements of ISO 22000 can be accomplished through the use of internal and/or external resources. ]SO/TS 22003:2013 defines the rules applicable for the audit and certification of a food safety management system (FSMS) complying with the requirements given in ISO 22000 (or other sets of specified FSMS requirements). It also provides the necessary information and confidence to customers about the way certification of their suppliers has been granted. Contents of ISO/TS 22003:2013 Introduction 1.Scope 2.normative reference 3.Definitions 4.Principles 5.General requirements 6.Structural requirements 7.Ressource requirements 8.Information requirements 9.Process requirements 10.Management system requirements Contents (2)- the annexes Annex A classification of food chain categories (Normative) Annex B minimum audit time (Normative) Annex C required food safety management system (FSMS) competence (Normative) Annex D Guidance on Generic certification functions (Informative) Annex E food safety management systems and product certification (Informative) reference: www.iso.org

20.01.2022 ELECTROMAGNETIC COMPATIBILITY (EMC) 61000-4-15 Testing and measurement techniques Flickermeter Functional and design specifications This part of IEC 61000 gives a functional and design specification for flicker measuring apparatus intended to indicate the correct flicker perception level for all practical voltage fluctuation waveforms. Information is presented to enable such an instrument to be constructed. A method is given for the evaluation of flicker severity on the... basis of the output of flickermeters complying with this standard. The flickermeter specifications in this part of IEC 61000 relate only to measurements of 120 V and 230 V, 50 Hz and 60 Hz inputs. Characteristics of some incandescent lamps for other voltages are sufficiently similar to the values in Table 1 and Table 2, that the use of a correction factor can be applied for those other voltages. Some of these correction factors are provided in the Annex B. Detailed specifications for voltages and frequencies other than those given above, remain under consideration. The object of this part of IEC 61000 is to provide basic information for the design and the instrumentation of an analogue or digital flicker measuring apparatus. It does not give tolerance limit values of flicker severity. See more

20.01.2022 ISO 13485:2003Medical devices -- Quality management systems -- Requirements for regulatory purposes ISO 13485:2003 specifies requirements for a quality management system where an organization needs to demonstrate its ability to provide medical devices and related services that consistently meet customer requirements and regulatory requirements applicable to medical devices and related services. The primary objective of ISO 13485:2003 is to facilitate harmonized medical device... regulatory requirements for quality management systems. As a result, it includes some particular requirements for medical devices and excludes some of the requirements of ISO 9001 that are not appropriate as regulatory requirements. Because of these exclusions, organizations whose quality management systems conform to this International Standard cannot claim conformity to ISO 9001 unless their quality management systems conform to all the requirements of ISO 9001. All requirements of ISO 13485:2003 are specific to organizations providing medical devices, regardless of the type or size of the organization. If regulatory requirements permit exclusions of design and development controls, this can be used as a justification for their exclusion from the quality management system. These regulations can provide alternative arrangements that are to be addressed in the quality management system. It is the responsibility of the organization to ensure that claims of conformity with ISO 13485:2003 reflect exclusion of design and development controls. Reference: www.iso.org

18.01.2022 OHSAS 18001 Occupational Health and Safety Management OHSAS 18001 sets out the minimum requirements for occupational health and safety management best practice. Work with us to bring OHSAS 18001 into your business and you can achieve the maximum return for your employees, your operations and your customers. What is OHSAS 18001?... OHSAS 18001 is a framework for an occupational health and safety management system. It can help you put in place the policies, procedures and controls needed for your organization to achieve the best possible working conditions, aligned to internationally recognized best practice. Also in Australia there are other standards for occupational health and safety that will be described in another post. Source: http://www.bsigroup.com

15.01.2022 ISO 22000 - Food safety management The ISO 22000 family of International Standards addresses food safety management. The consequences of unsafe food can be serious and ISOs food safety management standards help organizations identify and control food safety hazards. As many of today's food products repeatedly cross national boundaries, International Standards are needed to ensure the safety of the global food supply chain.... The ISO 22000 family contains a number of standards each focusing on different aspects of food safety management. ISO 22000:2005 contains the overall guidelines for food safety management. ISO 22004:2014 provides generic advice on the application of ISO 22000 ISO 22005:2007 focuses on traceability in the feed and food chain ISO/TS 22002-1:2009 contains specific prerequisites for food manufacturing ISO/TS 22002-2:2013 contains specific prerequisites for catering ISO/TS 22002-3:2011 contains specific prerequisites for farming ISO/TS 22002-4:2013 contains specific prerequisites for food packaging manufacturing ISO/TS 22003:2013 provides guidelines for audit and certification bodies The final updated version is expected early 2017. source: www.iso.org/

13.01.2022 ISO 31000 - Risk management Risks affecting organizations can have consequences in terms of economic performance and professional reputation, as well as environmental, safety and societal outcomes. Therefore, managing risk effectively helps organizations to perform well in an environment full of uncertainty. Scope... ISO 31000:2009 provides generic guidelines for the design, implementation and maintenance of risk management processes throughout an organization. This approach to formalizing risk management practices will facilitate broader adoption by companies who require an enterprise risk management standard that accommodates multiple silo-centric management systems. The scope of this approach to risk management is to enable all strategic, management and operational tasks of an organization throughout projects, functions, and processes to be aligned to a common set of risk management objectives. Accordingly, ISO 31000:2009 is intended for a broad stakeholder group including: - executive level stakeholders - appointment holders in the enterprise risk management group - risk analysts and management officers - line managers and project managers - compliance and internal auditors - independent practitioners. ISO 31000:2009 ISO 31000:2009, Risk management Principles and guidelines, provides principles, framework and a process for managing risk. It can be used by any organization regardless of its size, activity or sector. Using ISO 31000 can help organizations increase the likelihood of achieving objectives, improve the identification of opportunities and threats and effectively allocate and use resources for risk treatment. However, ISO 31000 cannot be used for certification purposes, but does provide guidance for internal or external audit programmes. Organizations using it can compare their risk management practices with an internationally recognised benchmark, providing sound principles for effective management and corporate governance. Source: www.ISO.org, www.wikipedia.org

13.01.2022 ISO 9000 - Quality management The ISO 9000 family addresses various aspects of quality management and contains some of ISOs best known standards. The standards provide guidance and tools for companies and organizations who want to ensure that their products and services consistently meet customers requirements, and that quality is consistently improved. Standards in the ISO 9000 family include:... ISO 9001:2015 - sets out the requirements of a quality management system ISO 9000:2005 - covers the basic concepts and language ISO 9004:2009 - focuses on how to make a quality management system more efficient and effective ISO 19011:2011 - sets out guidance on internal and external audits of quality management systems. ISO 9001:2015 ISO 9001:2015 sets out the criteria for a quality management system and is the only standard in the family that can be certified to (although this is not a requirement). It can be used by any organization, large or small, regardless of its field of activity. In fact, there are over one million companies and organizations in over 170 countries certified to ISO 9001. This standard is based on a number of quality management principles including a strong customer focus, the motivation and implication of top management, the process approach and continual improvement. These principles are explained in more detail in the pdf Quality Management Principles. Using ISO 9001:2015 helps ensure that customers get consistent, good quality products and services, which in turn brings many business benefits. Certification to ISO 9001:2015 Checking that the system works is a vital part of ISO 9001:2015. It is recommended that an organization performs internal audits to check how its quality management system is working. An organization may decide to invite an independent certification body to verify that it is in conformity to the standard, but there is no requirement for this. Alternatively, it might invite its clients to audit the quality system for themselves. Read more about certification to management system standards. Source: http://www.iso.org/

07.01.2022 CONFINED SPACES Code of Practice This Code of Practice on how to manage the risks associated with confined spaces in workplaces is an approved code of practice under section 274 of the Work Health and Safety Act (WHS Act).... SCOPE AND APPLICATION This Code provides practical guidance on how to meet the requirements under the WHS Regulations in relation to work carried out in a confined space. It applies to persons conducting a business or undertaking who have management or control of a confined space, and to designers, manufacturers or suppliers of plant or structures that include, or are intended to include, a confined space. This Code will help determine when a space is a confined space for the purposes of the WHS Regulations, what the potential hazards are and how to eliminate or minimise the risks when carrying out work in a confined space. Confined spaces pose dangers because they are usually not designed to be areas where people work. Confined spaces often have poor ventilation which allows hazardous atmospheres to quickly develop, especially if the space is small. The hazards are not always obvious and may change from one entry into the confined space to the next. The risks of working in confined spaces include: loss of consciousness, impairment, injury or death due to the immediate effects of airborne contaminants fire or explosion from the ignition of flammable contaminants difficulty rescuing and treating an injured or unconscious person asphyxiation resulting from oxygen deficiency or immersion in a free-flowing material, such as grain, sand, fertiliser, water or other liquids. http://www.safework.nsw.gov.au//confined-spaces-code-of-pr

06.01.2022 AS/NZS 4804-2001 Occupational Health and Safety Management Systems - General guidelines on principles, systems and supporting techniques This Standard provides guidance on the development and implementation of occupational health and safety management systems (OHSMS) and principles, and their integration with other management systems. The Guidelines are applicable to any organization, regardless of size, type, or level of maturity, that is interested in developing, implementi...ng or improving an OHSMS. The Guidelines are intended for use as a voluntary, internal management tool and are not intended for use by OHSMS certification/registration bodies as a specification standard. Effective implementation of an OHS management system should seek to ensure the organization complies with relevant OHS legislation, standards and codes of practice. However, the implementation of any of the part of this Standard, does not in any way assure compliance with legal requirements, or other obligations placed upon the organization by a statutory body. Hence, the implementation, either actual or intended, of this Standard, or parts thereof, would not preclude any action by a statutory body. For organizations wishing to implement, develop, improve, or in some cases audit an OHSMS, a pair of linked and complementary Standards is available to provide guidance. This Standard is the primary Standard relevant to all organizations and provides general guidance on how to implement, develop and/or improve an OHSMS. AS/NZS 4801, Occupational health and safety management systemsSpecification with guidance for use establishes an audit framework principally for use by third party bodies that have been asked by an organization to conduct an independent audit of the organizations OHSMS. The framework can also be used as a reference point for internal auditing procedures. It is envisaged that not all users of this primary Standard, AS/NZS 4804, will need to use AS/NZS 4801 as illustrated below. Readers wanting certification for an organizations OHSMS or an internal review of their system are referred to AS/NZS 4801, Occupational health and safety management systems Specification with guidance for use. The objective of this revision is to align this Standard closely with AS/NZS 4801:2001 by removing differences in definitions and the use of technical terms that could confuse readers. Source: www.saiglobal.com/

06.01.2022 ISO 55000 In 2004, the British Standards Institute (BSI), together with the Institute of Asset Management (IAM), released Publicly Available Specification 55 (PAS 55). This specification was very successful, with widespread adoption in the energy, transport, mining, process, and manufacturing industries. In 2008, 50 organizations from 15 industry sectors in 10 countries worked together to release the latest update to PAS 55, known as PAS 55: 2008. It contained two parts:... 1. PAS 55-1: Specification for the Optimized Management of Physical Assets, and 2. PAS 55-2: Guidelines for the Application of PAS 55-1 The new update provided clear definitions and a 28-point requirements specification for establishing and verifying an aligned, optimized, and whole-life management system for all types of physical assets. In late July 2009, BSI, supported by IAM, submitted a proposal to form a "Project Committee" to develop an International Standard. This ISO Standard would be based upon the good work already captured in PAS 55, and include input from other industries and learned societies located worldwide. Thus, in January 2014, under the umbrella of the International Organization for Standardization, the ISO 55000 family of standards for asset management was published. Generally referred to as ISO 55000, this standard includes three key chapters: 1. ISO 55000 Asset Management Overview, principles 2. ISO 55001 Asset Management Management systems Requirements 3. ISO 55002 Asset Management Management systems Guidelines for the application of ISO 55001 According to the IAM, These three international standards are important not only for their content, but because they represent a global consensus on what asset management is and what it can do to increase value generated by all organizations. In addition to outlining the definition and terminology of asset management, ISO 55000 standards can integrate with other major management systems standards. These include, ISO 9001 for quality management, ISO 14001 for environmental management, OHSAS 18000 for occupational health and safety, and ISO 31000 for risk management. The ISO 55000 family is also the first management system standard to implement the new ISO Annex SL, which establishes a consistent basis for all management systems, enabling better integration and coordinated monitoring, audit, and certification. To align with this new template, other management system standards will be updated to meet these criteria. ELEMENTS OF ISO 55001 ISO 55001 contains seven areas of compliance (per the publically available table of contents): 1. Context of the organization 2. Leadership 3. Planning 4. Support 5. Operation 6. Performance evaluation 7. Improvement

03.01.2022 Australian Standard AS 1100.1011992 Technical drawing... Part 101: General principles This Standard is one of a series dealing with technical drawing, the other Standards in the series being as follows: Part 201: Mechanical drawing Part 301: Architectural drawing Part 401: Engineering survey and engineering survey design drawing Part 501: Structural engineering drawing We will review other standards in future posts. This Standard sets out the basic principles of technical drawing practice. Section 1 sets out abbreviations. Section 2 specifies materials, sizes, and layout of drawing sheets. Section 3 specifies the types and minimum thicknesses of lines to be used and shows typical examples of their application. Section 4 sets out the requirements for distinct uniform letters, numerals, and symbols. Section 5 sets out recommended scales and their application. Section 6 sets out methods of projection and of indication of the various views of an object. Section 7 sets out methods of indicating section and provides information on conventions used in sectioning. Section 8 sets out recommendations for dimensioning including size and geometry tolerancing. Section 9 specifies conventions used for the representation of components and repetitive features of components. Appendices provide information on the various projection methods, geometry tolerancing and comparison with other Standards. The basic principles given in this Standard are intended for adoption in the fields of engineering, architecture, surveying, drafting technology, and education in the preparation and interpretation of technical drawings, diagrams, charts, and tables for the purpose of conveying technical information. Technical drawings include such things as: (a) Detail drawings. (b) Assembly drawings. (c) Plans. (d) Illustrations. (e) Schematic diagrams. (f) Pictorial drawings. (g) Installation drawings