Subarugears in Perth, Western Australia | Automotive

Subarugears

Locality: Perth, Western Australia

Phone: +61 419 243 275

Address: 85b Beechboro rd South 6053 Perth, WA, Australia

Website: http://www.subarugears.com

Likes: 6663

Add/Update information

Reviews

Tags

• Automotive, aircraft & boat
• Automotive
• aircraft & boat

23.01.2022 Mitsubishi 4G63 Subadaptor and Sti 6 speed flywheel setup. For those using the evo motors.. :-)

21.01.2022 Explaining.how the dual.range input gears work with the counter gear.

21.01.2022 Assembly into the case.

20.01.2022 VW beetle front Subabrakes to suit Subaru STi setup now in stock. Drilled for 5x100 and center drilled for 4x130, 5x130, 5x114.3

19.01.2022 Mitch going for a very nice long drive in his Subarugears T3. Th is setup has done over 40,000 kms.

19.01.2022 Installation of the Subanose cast nosecone and checking all gears select perfectly.

19.01.2022 Check out Chris's turbo notchback with Subarugears 5 speed!

18.01.2022 A little bit of company representation on the test Vanagon :-)

18.01.2022 So we got stuck into the cladding on the 61 Snail Motorhome yesterday!!. If you wanna follow along on the journey of our Kombi Snail / RV builds feel free to cl...ick and like our biz page Retro RV Info: - Upper and lower Berths made out of steel for strength - Remainder of frame fabricated out of 25x25x2mm Aluminium to keep weight down. - 3mm alupanel used for outside cladding - 3M VHB (very high bond) double sided tape to stick alu-panel to frame and then sikaflex on every upright and cross bar from the inside. Definitely no rattles in this old girl. - Engine EJ25 subaru - Gearbox Subarugears reversed 5 speed See more

17.01.2022 Dual range transmission identification

16.01.2022 We've now combined our 3 days of short videos into one DIY 5mt disassembly, conversion and assembly video. Easy to follow :-) https://youtu.be/8lRP0udwjDs

16.01.2022 Another Subaflywheel and adaptor released today....VW type 1 aircooled with flanged crank for big power...can now be bolted up to the Subarugears 5 speed transmission. Check out our adaptors page with 14 different adaptors already available : http://www.subarugears.com/Adaptors/Adaptors.html

16.01.2022 Pinion nut assembly and torque to specification.

16.01.2022 Assembling the 2WD hi power pinion into the driven gear assembly.

16.01.2022 Input shaft installed. Sealing the case halves together and leaning over the pinion retaining nut.

14.01.2022 Set the contact point of ring and pinion...listen for zero backlash.

14.01.2022 Fitting the optional Subashifter and cutting the hockey stick shorter for compact installation.

13.01.2022 Another snail camper taking shape using the Subarugears driveline to power it

13.01.2022 Preparing to find the contact point of ring and pinion.

13.01.2022 Installing the pop-in stub axles and oil filler cover.

12.01.2022 We've upgraded our Pinion Depth tool to one manufactured from precision laser cut stainless steel with quality steel dowel pins. Available separately for $150 shipped or FREE with every Rear Drive conversion kit or Ring and Pinion purchased.

10.01.2022 Checking the mesh pattern again with less shims. Preparing to install the input shaft.

08.01.2022 Loic's beautiful turbo 5 speed whitestar

08.01.2022 Rear drive conversion kit with FREE Subanose cast nosecone, FREE Subamount transmission mount, FREE installation tools (pinion depth, backlash measuring, backlash adjuster, marking grease). $2800 of value for $2000 SHIPPED WORLDWIDE. Also the amazing Subadiff limited slip differential with Subastub stub axles. Just $700 shipped with stub axles included. Usually $1000.

07.01.2022 Inspecting the mesh pattern.

06.01.2022 Installing O ring onto the bearing retaining cups.

05.01.2022 2wd Hi power pinion fits into the driven gear shaft without the bearing locking collar.

05.01.2022 We are out of the office for a week from today with limited access to social media. We'll respond to messages when we get back. Thanks for your understanding.

05.01.2022 https://www.facebook.com//suba/permalink/3540838522594361/

04.01.2022 Kurley's Subarugears 5 speed splittie limousine continues to impress clients....

04.01.2022 The reason dual range cannot be used with the reversed ring and pinion.

04.01.2022 Disassembly of the pinion shaft and components

04.01.2022 Showing the AWD pinion gear vs the 2WD hi power pinion gear differences.

03.01.2022 Just finished 3D printing the final prototype for the reversed Subaru 4EAT automatic transmisson cover plate with integrated Vanagon mount. A little more clearance to sink the bolt heads and we're ready to make a billet one to update our test bus. Total length of reversed Subarugears auto is 655mm plus 25mm in mount depth. Compared to the reversed 5 speed manual at 565mm so the auto is 90mm (3 1/2 inches) longer.

03.01.2022 The Subarugears test Vanagon gets it's lowered gowesty springs all around. Visually it looks a bit more squat. To drive, it's fantastic. Not as high as a truck anymore, far better roadholding and a comfortable, progressive spring.

03.01.2022 Black Friday is almost here, look out for our 2020 Black Friday deal THIS Friday 27th November :-)

03.01.2022 Vanagon Subarugears 5 speed shift kit repair parts available soon. Improved over the original seller's items as well.

02.01.2022 Adjusting for zero point again by winding the lower bearing retainer.

02.01.2022 Setting the backlash by moving the bearing retainers out on ring gear side and in on non-ring gear side, plus add preload.

02.01.2022 Fitting the Subarugears VSS solution for transmission without their own VSS driven by the gearset.