Tarlee Custom Engineering | Vehicle, aircraft and boat

Tarlee Custom Engineering

Phone: +61 408 508 480

Add/Update information

Reviews

Tags

• Businesses
• Vehicle, aircraft and boat
• Automotive
• aircraft & boat

24.01.2022 All TCE components are available through : https://www.facebook.com/crusinAUTOMOTIVE/

23.01.2022 I will be looking at making this style of hub to suit Jag front ends. The plan is to narrow the track by 20-25mm per side. The ones in the pic are ones i made for a mate to suit Holden front end with 32mm discs and nissan 4 spot calipers

20.01.2022 Custom Procharger mounting bracket an alternator relocation for 340 Mopar for Paul Pavlo Motors customer

19.01.2022 Just an update. I have 4 differënt size Ozi-Steers 6",9", 12" and 15" now available. I can make different lengths but only as a special order and at additional cost.

18.01.2022 Well havent been making much in the parts department yet but have done a lot of measuring and working out for a few different things. Made quite a bit of tooling for the new mill and managed to finish1 300mm between centres Ozi-steer and only a sprocket short of finishing another.

17.01.2022 Anybody know what i'm supposed to do next. Besides have a beer??

17.01.2022 Well seems i will have to re-think the Jag hubs idea. Cant get the clearance on the calipers. Can be done using sliding calipers but you would be going backward with the brakes even though they would still work fine

17.01.2022 Well the front end's in and all excess brackets removed. Next will probably be the dash swap or the rear end. See what time i have and what turns up first lol

16.01.2022 Next prototype slowly getting sorted. Bit more adjustments and will be ready for the engineer to test

15.01.2022 Couple of pics of the sumps and started welding the holes in the firewall. Don't know why there were so fkn many and still more to go

14.01.2022 Bit of redneck ingenuity. First off drag link made out of galv water pipe

14.01.2022 Well i have a bit of an issue with the trans pans due to core shift & a bit too much material on the sides. Fouling on the valve bodies so will pick the patterns up and modify them. Have similar issue with the sump but i can just add a small addition to the program to machine the relief. Will have to get a quote for the pick-up tube unless everyone wants to modify their own.

14.01.2022 Second the redneck stubby or long neck holders. AAhhh kin jurst pture Bubba aannd Leerooy dravin this to tha local klan meetin

14.01.2022 Well might try and get the donor motor and box out today though might try and get front panels off first without snapping bolts. Could be a challenge

11.01.2022 Here's a pic of the first one fitted to give you an idea of what they do

10.01.2022 Couple of pics of one fitted up

10.01.2022 Custom hubs for my mates 34 Chev

10.01.2022 Chassis is fairly clean for 62 year old pick-up. Even has most of the original paint

10.01.2022 Well new castings have finally arrived. Have some work to do next week machining

09.01.2022 The new shop truck Might even have to use an Ozi Steer just to show it off lol

08.01.2022 Well not much progress on anything lately. Waiting on some tooling to finish the sumps 1UZ alloy sumps before powder coating one and polishing 2 (one for moi). Trans pans the same. Bevel drive gearboxes are at the engineers being tested. Ozi-Steers are finished and available for whoever wants one. Have a few other things in the pipeline but down the track. Can do one offs if you need something or if you come up with something that is no longer available or not yet available let me know and see how we go

06.01.2022 Might try and use these but will have to make some 6 stud hubs to suit Jag front end

06.01.2022 Looks a bit closer to proper height

06.01.2022 Rear end sorted lol

04.01.2022 Well the new shop truck is here. On the hoist, measurements taken, dash is out, wiring nearly removed. Jag front end waiting to go in. Gen 3 and 6 speed waiting patiently for its turn. Just have to decide on the rear end. I can tell you it won't bee Ford shit

03.01.2022 Well its been a long time since I've added anything but getting on top of things finally. The new design chain drives are now sorted. ( some details on the Ozi-Steer page) I have started a new design of exhaust flanges which will be available shortly. Heres a couple of pics'. I have another trimmed back design but have to get some pics off my ph. That's it for now

02.01.2022 Have had these in the pipeline as well for a while. To fit Lexus V8. Rear drop finned alloy sump,trans pan and rocker cover inserts for the old school look. Got a few more things in mind but all takes time.

02.01.2022 Looks like original heater

01.01.2022 Waiting on my parts order then these will be ready to fit