TNT Mobile Welding in Forth, Tasmania | Automotive, aircraft & boat

TNT Mobile Welding

Locality: Forth, Tasmania

Phone: +61 427 947 186

Address: Forth Road 7310 Forth, TAS, Australia

Website:

Likes: 212

Add/Update information

Reviews

Tags

• Commercial and industrial
• Automotive, aircraft & boat
• Automotive repair centre

25.01.2022 Another trailer we refurbished with new X-member and new floor plus a few patches on the sides

23.01.2022 This is a hi-ab we fabricated mounting brackets for and fitted to the truck also fabricated mounting plate for control box,just needs plumbing done now......

23.01.2022 The new truck with the sign writing done and......a new employee, things are looking up

22.01.2022 Started working on this last week, lots more to do yet though..........

22.01.2022 This is an access ramp we made for a customer who is confined to a wheelchair and couldn't get out the backyard, the panels on top have been texture coated for non-slip, so burnouts in the wheelchair are out ,stainless steel handrail and gate for carer to access clothes line......

22.01.2022 Before and after pictures of a set of paddock narrows we rebuilt

21.01.2022 Another camping flatpack fire pit, this one has leg extensions (not shown)

20.01.2022 Check this out.........

20.01.2022 A few more pieces sorted.........

20.01.2022 More plate going back in

20.01.2022 Before and after pictures of a woodheater we refurbished with new back on firebox, new baffle plate,new door and glass seals and retainer, and two new length of flue, should last for another 10years.........

20.01.2022 A couple of out of the ordinary type jobs,, a horse shoeing anvil and a roo skinning rack for rear of ute, something a bit different but weve always said that we will have a go at any job...........

19.01.2022 Another fire surround to protect the little ones.....

19.01.2022 These are a couple of hand rails for decks we done a while back......

19.01.2022 Been on this for the last couple months, made a few changes here and there like pot hauler modified and repositioned, old sea door filled in, new sea door made for new position, existing hatches and combing modified and enlarged, new baffle boards made for the center hatch, holding brackets made for the hatches to hold rods for hanging of the larger fish, a new cradle for the dinghy to be mounted on plus a few other odds and ends that I dont have pics of..........

18.01.2022 This is a flat tray I made for one of jacmad engineering customers

18.01.2022 A tandem trailer we modified for a customer, ramps made to hinge so loading and unloading is easier, drop down legs at back and couple of repairs to tie rails.......another happy customer

17.01.2022 This is an access ramp we made for a customer who is confined to a wheelchair and couldnt get out the backyard, the panels on top have been texture coated for non-slip, so burnouts in the wheelchair are out ,stainless steel handrail and gate for carer to access clothes line......

17.01.2022 This is our first automatic sliding gate opener, works well I think......

17.01.2022 A bit of extra storage space underneath a horse float truck.....

16.01.2022 This is a pirethium bin we modified to fit the truck tray it's mounted on which we also modified to make it a tipper with front mounted hoist, came out really good after painting, customer happy........

14.01.2022 Fire pit finished and painted, I think it came out pretty good , I also think it was worth the sweat .....

14.01.2022 This is one of the seams we found that needed half a packet of rods and multiple runs to repair but we got it..........

14.01.2022 This was a job that was not one we normally do but we will try our hand at anything, all worked out well

14.01.2022 This rust bucket came up in December, needing a lot of work......3 months later she was pushed back in the water looking much better, was only a small work crew but I think we smashed it ........

13.01.2022 These are the pics of our latest little job before...... and then after.......a bit of oil or stain and Bobs your uncle.........

13.01.2022 These are a couple of repair jobs we have done over the past few days, a new stub axle on the harvester head and new bushes and pins on the bobcat......

11.01.2022 Some steel fabrication we did a few weeks back for jacmad engineering

10.01.2022 Made these the other day, with a bit of help from Andrew and the guys at Mersey Slipways for the muscle and the use of the guillotine and the bender, they are to be used as treatment baths for sheep feet, customer happy with the results.......

10.01.2022 No probs here, awesome!!!!!

09.01.2022 Could be doing a lot of work on this one soon......

08.01.2022 Another heater we made for shed, works well.....

07.01.2022 Does anybody know anyone who has a full complete wiring harness for 78 to 80 model Yamaha xs1100 that they are willing to part with, I need one urgently to complete a trike project Im working on thanks and cheers

07.01.2022 This is a custom frame we made for a customer who does a fair bit of camping, good storage space inside, all flat nothing to get caught up on, fold down shelf for the barby and the kitchen sink frame is also able to be unbolted for easy storage when not in use or if trailer is needed for something else.....customer was happy with the results

07.01.2022 This is a wood heater we made for a customer to put in their live in shed, needed a flat surface on top to cook on, works well

07.01.2022 Port side cooling pipes fitted up

06.01.2022 Tandem trailer we refurbished with new X-member and new thicker floor......

06.01.2022 This is a portal frame and walkway we made for a company that does rigging tickets, something for them to dismantle and then reassemble for assessing.......

06.01.2022 Couple of little jobs we done over the last few days, diesel tank split and new gate on a stock yard......

04.01.2022 Biggest piece of the puzzle started........the whole deck being replaced

03.01.2022 Made this up today for some friends who wanted a bit more comfort when camping, fits a double bed mattress nicely.....

03.01.2022 New cooling pipes

03.01.2022 This is a pirethium bin we modified to fit the truck tray its mounted on which we also modified to make it a tipper with front mounted hoist, came out really good after painting, customer happy........

03.01.2022 These are before and after shots of a bobcat where we refurbished the bushes and pins for the bucket mechanism, works heaps better now.......

03.01.2022 This has been my work view for the last couple days, almost makes work enjoyable

03.01.2022 A couple of jobs we did on the Mary H over the last few weeks, a new mast made and fitted for all the communication antennas, new rear window fitted to wheelhouse, and modified net hauler.........

03.01.2022 Still more bits of the puzzle..........

02.01.2022 This is a customer's container that is being converted to a holiday shack, needed a bit more security for the sliding door and window so I made up these hinged checker plate screens, fully lockable with tamper-proof lock box, looks great and works a treat.........

02.01.2022 With so many people doing camp outs in the backyard, I thought I'd have a go at making my version of the oz pig, I haven't had a chance to try it yet but I'm pretty confident that it will work well.........

01.01.2022 Another camping fire pot........

01.01.2022 With so many people doing camp outs in the backyard, I thought Id have a go at making my version of the oz pig, I havent had a chance to try it yet but Im pretty confident that it will work well.........