Weldpro Fabrications in Ravenhall | Industrial company
Weldpro Fabrications
Locality: Ravenhall
Phone: +61 438 926 000
Address: Unit 10 8-10 Vanessa Drive Ravenhall 3023 Ravenhall, VIC, Australia
Website: http://www.weldprofabrications.com.au
Likes: 442
Reviews
to load big map
25.01.2022 New tipper body rear swing doors for a customer in Melbourne, Feel free to call Danny on 0438 926 000 for your steel fabrication and earthmoving repairs, we also do onsite welding and repairs for the smaller jobs in and around Melbourne.
25.01.2022 https://www.weldprofabrications.com.au/line-boring/ Lineboring, worn hole is welded and followed by machining the hole to size for a pressed fit bearing.
25.01.2022 https://www.weldprofabrications.com.au/line-boring/ Line boring damaged bore for a liebherr material handler grab for a customer in Melbourne.
25.01.2022 Repairs to this cracked torque tube due to an over sized bucket being used, repaired cracks and added 32mm straps to the main boss, added gussets and finished up with line boring as the boss has moved with all the heat and welding. Feel free to call Danny on 0438 926 000 to discuss your earth moving repairs.
25.01.2022 Weldpro fabrications New heavy duty car carrier we have just finished, 3.2 tonne rated with 4 inch drop axles and electric brake away unit also has base plate mount for crane with legs at the rear. Danny 0438 926 000
24.01.2022 Weldpro fabrications have just completed this 46 ton bucket rebuild, new floor, edge, esco adapters, side cutters, wear strips etc. Feel free to call Danny on 0438 926 000 for your steel fabrication and earthmoving repairs.
24.01.2022 www.weldprofabrications.com.au Steel fabricated stands to hold 2 hydraulic cylinders 280mm in diameter in the upright position, these are for long term storage for a company in Ravenhall.
24.01.2022 www.weldprofabrications.com.au New belly guard fabricated for a caterpillar machine. Feel free to call Danny on 0438 926 000 for any steel fabrication and earth moving repairs in Melbourne.
22.01.2022 This grapple has been cut and repaired with new sections welded in, all using hard wearing steel. Weldpro fabrications repair all earthmoving attachments. We offer onsite welding for the smaller jobs with our service truck that is equipped with engine drive welder, oxy and power tools. Feel free to call Danny on 0438 926 000.
22.01.2022 www.weldprofabrications.com.au Steel operators cabin just completed fabricated using RHS tubing, zinc sheeting, insulated walls, sand blasted and painted in 2k and finished in safety glass with ceramic tint.
22.01.2022 New floor, edge and adapters fitted to this 46 tonne bucket. Welding with multi passes and rolling bucket over. #fluxcorewelding #bucketrebuild #attachmentrepairs
21.01.2022 https://www.weldprofabrications.com.au/ Stainless steel 3 inch water tank filler pipe.
21.01.2022 Small gate powder coated black for a unit block in Brooklyn.
21.01.2022 www.weldprofabrications.com.au Council access park gates made to order with lock box for a customer in Melbourne.
19.01.2022 www.weldprofabrications.com.au This Liebherr wheel loader had a plastic guard and step that was damaged, we fabricated a new steel step and guard to replace it. #steelfabrication #liebherr #earthmoving
18.01.2022 https://www.weldprofabrications.com.au/line-boring/ Line boring excavator mud bucket and fabricating new 80mm pins at the workshop in Ravenhall.
18.01.2022 Weldpro Steel fabrications Ravenhall have recently completed two stands to house 4 280mm diameter 3 meters long hydraulic cylinders in the standing position, ready to send out for painting. https://www.weldprofabrications.com.au/
17.01.2022 Couple of trolleys for some Kubota gensets I made for a customer, not for road use.
16.01.2022 Concrete skate park steel edging, made using folded 8mm mild steel with reo bars welded underneath for riverwalk estate in Werribee Vic. Feel free to call Danny on 0438 926 000 for your steel fabrication and welding.
14.01.2022 Lineboring caterpillar D6 push arm tilt cylinder, first picture shows the new bearing loose in the hole and last picture shows the bearing ready to be pressed in.
14.01.2022 Caterpillar excavator window guard fitted to protect the glass and cabin from getting damaged.
14.01.2022 https://www.weldprofabrications.com.au/ Steel fabricated 40mm and 25mm heavy duty steps for a caterpillar rubbish compactor for a company in Ravenhall. Weldpro specialise in all steel fabrication and mobile onsite welding in Melbourne. Feel free to contact Danny on 0438 926 000.
13.01.2022 www.weldprofabrications.com.au Line boring center dog bone bosses after plates have been replaced. #earthmoving #bucketrepairs
13.01.2022 www.weldprofabrications.com.au Repairs to a D6 caterpillar blade that had the trunnions replaced by another company under 300 hours ago and they are already coming apart from the welds, also old cracks in the gusset not repaired and no weld preps, all welded vertical down. Cut all plates out and fitted new plates.
12.01.2022 https://www.weldprofabrications.com.au/ Fabricated and galvanised 5 shooting target stands for the Lara pistol club ready to be delivered to there club in Lara.
11.01.2022 Table frame with legs to be powder coated for an outdoor setting.
11.01.2022 https://www.weldprofabrications.com.au/ Heavy duty steel fabricated truck wheel wash floor grid, these had to start at 110mm high and finish at 55mm high to fill in a void on this concrete exit ramp.
10.01.2022 Caterpillar dozer grab rails fabricated for a customer in Melbourne, feel free to call Danny on 0438 926 000 to discuss your earth moving steel fabrication needs.
09.01.2022 Aluminium vandal guards with lock boxs for this Hitachi excavator. Danny 0438 926 000. #vandalguards #excavatorvandalguards
08.01.2022 www.weldprofabrications.com.au Repairs to these bent 20mm plates that got pushed out due to the pin snapping in half, bent plates had to be cut out and new plates cut to shape along with new bosses machined and welded back in ready for line boring. #earthmoving #bucketrepairs #steelfabrication
08.01.2022 www.weldprofabrications.com.au Steel handrails 25 meters per side hot dip galvanised for a walkway at saltwater estate in Point Cook Melbourne.
07.01.2022 Oxy cutting holes to suit bigger bolts for a customer in Dandenong. Weldpro fabrications specialise in bucket repairs steel fabrication and onsite welding all over Melbourne or at our workshop in Ravenhall Melbourne. Feel free to call Danny on 0438 926 000 to discuss your needs.
07.01.2022 www.weldprofabrications.com.au Line boring excavator quick hitch for a customer in Melbourne.
06.01.2022 Full set of vandal guards for this Case Excavator for a customer in Melbourne. Weldpro fabrications are located in Ravenhall, please call Danny on 0438 926 000 to discuss your steel fabrication and earthmoving repair needs.
06.01.2022 Line boring Komatsu wheel loader z bar, all bores had wear and had to be welded and machined to suit new pins. https://www.weldprofabrications.com.au/line-boring/
06.01.2022 Started rebuild on this 46 tonne rock bucket this morning, getting a new floor, edge, shanks and wear plates. #bucketrebuild #arcairgouging #grinding #oxycutting.
05.01.2022 https://www.weldprofabrications.com.au/ Weldpro steel fabrication in Ravenhall have just completed a new operators cabin as the old one in the background was damaged, ready to send out for paint then back to the workshop to fit the safety glass and send to site.
04.01.2022 Caterpillar dozer D6 blade and push arms getting skins fitted, Trunnion was also replaced.
03.01.2022 www.weldprofabrications.com.au Repaired fingers in this 20 ton excavator grab that had seen better days. For all earthmoving and steel fabrication please call Danny on 0438 926 000.
02.01.2022 Cutting some plates with the magic eye profile cutter using cardboard templates.
01.01.2022 Excavator aluminium vandal guards made using 3mm tread plate folded and curved to suit all window shapes and sizes at Weldpro fabrications.
Related searches
- A PLUS
Businesses Local service Home improvement Construction company Industrial company Telecommunications company
+61 1300 789 879
346 likes
- Wards House Raising and Restumping
Businesses Industrial company Commercial and industrial
+61 7 3200 0809
209 likes
- Sunbuild Constructions
Businesses Industrial company Commercial and industrial
+61 459 245 838
7 likes
- Pryde Measurement Pty Ltd
Businesses Industrial company Commercial and industrial
+61 3 9567 0700
12 likes
- GCG Health Safety & Hygiene
Businesses Industrial company Commercial and industrial
1300 424 474
219 likes
- Dexion Acacia Ridge
Businesses Industrial company Commercial and industrial
+61 7 3711 7288
373 Bradman Street 4110
28 likes