Wicked Wire Works | Vehicle customisation shop

Wicked Wire Works

Phone: +61 432 629 725

Add/Update information

Reviews

Tags

• Businesses
• Automotive repair centre
• Vehicle, aircraft and boat
• Vehicle customisation shop
• Vehicle service

25.01.2022 Always a pleasure working with Cody McKay Motorsports, check out how he’s keeping his skills up in the off season.

25.01.2022 Something Ive grown fond over the last 12 months is 40-60 series land cruisers with Gregs being one of the few Ive had the pleasure of doing an extensive amount of work on recently. As you can see by some of the before photos the 350 conversation was already completed before Greg purchased the 45 but wiring was a mess and had multiple issues. I fitted a ton of new parts and accessories and gave all the wiring a clean up and replaced most of the factory harnesses along the ...way as well. - New LED 7 inch round headlights - New 9 inch Narva driving lights(bullbar) - New 7 inch Narva driving lights(rooftop) - New LED tail lights - New LED clearance lights - New 12,000 pound winch - New horn and washer circuits - New relays fusebox for the conversation - Repaired and replaced all gas wiring and circuit - Wired in electronic power steering We replaced the 45 series Parker/blinker guard lights with round 40 series round blinkers as we moved the parkers into the LED Headlights. Replaced most of the factory switches in the dash including headlight, combination stalk and dash fan I also removed all the other switches and gave them a clean up and checked them over and replaced most of the underdash plugs due to age and becoming brittle or damaged and we added some push/pull switches for the new accessories to be keep the dash looking period correct. As you can see by the end results it came up a treat and we cant wait to add a few more small touches to this as Greg continues with his build.

25.01.2022 We recently installed a dual battery system for Road Test Australia in their new van to run all of their auxiliary surveying equipment. We decided on a REDARC Electronics 40 amp DC/DC battery charger, to charge 100AH lithium battery tucked behind the drivers seat.

23.01.2022 2020 has started off with a bang for us! Check out Mitchs Landcruiser troopie! One of the cleanest 40s series troopies around now has the tough engine to match the tough looks. We completed a stand-alone LS harness, New starting, charging and dual battery system and removed all the factory Toyota harness. To what was needed to operate the factory front end circuits and refreshed all the engine bay wiring. Looking forward to seeing the final results with this one!

22.01.2022 Another cool American car we recently worked on was this Trans Am. With a faulty hazard circuit and a small problems in the power window circuit. We got them sorted and ready for the customer to sell.

22.01.2022 Andrews HJ55VT getting some panel love today at the shop. Check out the build thread on the ih8mud forums. Looking forward to sharing this whole build with you soon!

21.01.2022 We recently did a UHF, driving lights and light bar install on Pete’s triton to help for when he’s out west for work. If you are after something similar, or would like a quote then feel free to contact us!

20.01.2022 The little guys that are unstoppable! Cody McKay Motorsports As most of you know we came on board to sponsor Cody and his team for there debut this weekend at the Newcastle 500! But during qualifying yesterday afternoon unfortunately Cody ended coming into contact with a wall. Which was heartbreaking for us here at Wicked not to mention Cody and his team! ... Straight away we reached out to Cody telling him what ever was needed to call! The team worked late into last night and replaced everything that was needed the parts list is crazy! Somehow the guys got everything done and back onto grid this morning for race 1 but the car was having a few electrical gremlins! Cody gave us call and I headed straight in to sort him out and get him back out ASAP! Unfortunately we missed race 2 today but we got him going and gave the rest of the wiring the once over! Its not over yet! Tomorrows a new day go get them mate!

20.01.2022 Whos keen for this weekend full of racing in Newcastle! We are! Make you sure you keep an eye on the local team Cody McKay Motorsports!

19.01.2022 Just getting in some late night harness play. Giving this main dash harness out of a Datsun 1200 Ute a freshen up.

19.01.2022 New toolbox for the work Ute today. Always a great feeling getting a new box. Now Ive just gotta fill it as you can see the old one was banged up but did Josh a solid 9 years of work!

18.01.2022 Always great when you come across your branding somewhere. Shout out to the boys over at United Speed Shop for the support. Some seriously bad arse builds come out of there!

18.01.2022 Another cool classic we did some upgrades on recently was Matt’s buick. After a quick inspection we discovered that the alternator was charging at 19 volts at idle. The external regulator had failed. We rewired the charging circuit and retrofitted a new internally regulated alternator. Now she’s back to a healthy 14.4 volts and ready for more Cruising.

18.01.2022 And thats 2019 done! What a year, To think when I started this venture that Id be where I am today is crazy. So from us at Wicked Wire Works I hope you all have a safe Christmas and enjoy your break. Lastly a thank you to all our customers who continue to support us. Bring on 2020!

18.01.2022 We recently did a UHF, driving lights and light bar install on Petes triton to help for when hes out west for work. If you are after something similar, or would like a quote then feel free to contact us!

18.01.2022 Yesterday afternoon we had a call out to Newcastle yacht club to investigate a problem with Kents new boat and what a beauty she is. He was having issues with his 24v transfer pumps we found the issue and got it sorted

18.01.2022 Recently fitted a REDARC Electronics 150W Monocrystalline Solar Panel and a 20A solar regulator to Warricks mariner 31 boat while it was out on hard stand to get some maintenance. We set it up charge his house batteries to run his house accessories including lights, power outlets and fridge.

16.01.2022 Recently done a bit of work on Nics Ute. He was having a few small issues and needed a head unit and some speakers installed. Got all his gremlins sorted and fixed up. Looking forward to seeing the finished product when the tray is done.

16.01.2022 Another cool original f truck we had in recently was Daniels 1973 f truck. Having ignition issues we installed a new ignition switch and key barrel and gave the wiring a once over tidying up a few lose ends. Looking forward to seeing what Daniel has In store for this one in 2020. It wont be the last we see of this clean old f truck Im sure.

15.01.2022 How cool is this! We recently got a call as Glens one of a kind club car had stopped running. After a check up it was determined the coil and ignition systems where faulty. Ordered in some new parts and got it up and running again.

13.01.2022 Recently got the privilege to help bring another 40 Series LandCruiser back to life. Tom contacted us to help with the factory wiring after hed done all his paint and panel work as he had encountered some gremlins during the reassembly. We installed a complete new rear harness including; new tail lights and new rear LED work lights that operate either from reverse or toggle switch. Upfront we also installed new headlight assemblies with new H4 headlights plugs and a slimlin...e LED Lightbar. We also tidied up the engine bay wiring, this included fitting and terminating a new internally regulated alternator. We also replaced a few of the factory switches including the headlight switch and combination switch inside the cab. Its great to see another old LandCrusier brought back to its former glory. We hope Tom enjoys daily driving this as much as we helped getting his build finalised!

13.01.2022 Always a pleasure working with Cody McKay Motorsports, check out how hes keeping his skills up in the off season.

13.01.2022 Something I’ve grown fond over the last 12 months is 40-60 series land cruisers with Greg’s being one of the few I’ve had the pleasure of doing an extensive amount of work on recently. As you can see by some of the before photos the 350 conversation was already completed before Greg purchased the 45 but wiring was a mess and had multiple issues. I fitted a ton of new parts and accessories and gave all the wiring a clean up and replaced most of the factory harnesses along the ...way as well. - New LED 7 inch round headlights - New 9 inch Narva driving lights(bullbar) - New 7 inch Narva driving lights(rooftop) - New LED tail lights - New LED clearance lights - New 12,000 pound winch - New horn and washer circuits - New relays fusebox for the conversation - Repaired and replaced all gas wiring and circuit - Wired in electronic power steering We replaced the 45 series Parker/blinker guard lights with round 40 series round blinkers as we moved the parkers into the LED Headlights. Replaced most of the factory switches in the dash including headlight, combination stalk and dash fan I also removed all the other switches and gave them a clean up and checked them over and replaced most of the underdash plugs due to age and becoming brittle or damaged and we added some push/pull switches for the new accessories to be keep the dash looking period correct. As you can see by the end results it came up a treat and we can’t wait to add a few more small touches to this as Greg continues with his build.

12.01.2022 Its all about the finer details. Custom harnesses for anything and everything.

12.01.2022 Another classic cleaned up and back cruising. We recently had Nics mini in for a front harness tidy up as it was well overdue! The engine and front body harness had been changed and chopped many times over the life of the car. So we removed all the front harnesses and started from scratch designing and installing a new front body and engine harness. We also installed a electric fuel pump and did a few small changes to engine electrical to make it more reliable. Its always fun being the old cars back to life! Thanks for the work Nic!

11.01.2022 Work truck upgrades! Shout out to R.M.H BUILT for dropping in and giving us a hand today sheeting in some of our canopy and helping us get the new draws installed!

11.01.2022 Updating old builds are always interesting. Great little find I had today behind the dash cluster.

09.01.2022 Mazda love! Check out this rx7 we did recently. Gordon needed a few small changes made after recently having a new ECU and rewire completed. The following work was done. - Head light repair and new plugs... - Tail lights circuit wired up - Blinker circuit created and wired up - LED warnings light changes Looking forward to getting a few more things sorted for Gordon in the near future

09.01.2022 Shout out to Allan from Wheel Change U Newcastle for the love always a pleasure helping out other local businesses. If you need tyres make sure you check them out!

08.01.2022 Quick little dash camera with a reverse camera function for the guys over at Totally Workwear Newcastle on there new work van yesterday. Thanks for the work guys appreciate it.

08.01.2022 Another one ticked off the list. We recently did some work for Woodys Towing Service on the central coast brining their new truck up to date with all new LED lighting and a new in car multimedia system. Work carried out included: - New emergency beacons and bullbar lights... - New Narva LED tail lights - New Narva LED headboard taillights - New Narava LED clearance lights - New Kenwood Wireless CarPlay headunit with reverse camera and speakers - New 87Db Reverse beeper - New 12v accessory sockets inside the rear of cab In the process we removed all old harnesses and repaired existing harnesses the pictures speak for them self. If your on the central coast and see Lez in his new truck make sure to say hi grab a card and let him know how good the truck looks.

08.01.2022 We often post our more unique jobs but we also an array of more common jobs like this 2016 Ford Ranger which had starting issues. This vehicle was previously mine certified with both battery and starter isolators and other accessories, The customer gave us a call as every now and then the vehicle would not start. Upon inspection we found multiple issues liked to the starting and charging systems so we replaced the starter battery and removed the isolators.

06.01.2022 Another classic cleaned up and back cruising. We recently had Nic’s mini in for a front harness tidy up as it was well overdue! The engine and front body harness had been changed and chopped many times over the life of the car. So we removed all the front harnesses and started from scratch designing and installing a new front body and engine harness. We also installed a electric fuel pump and did a few small changes to engine electrical to make it more reliable. It’s always fun being the old cars back to life! Thanks for the work Nic!

06.01.2022 Always a pleasure to help the greater Newcastle car community that supports us here at wicked. So today we are at the 2019 Maddie hill breast cancer charity car & bike show with Josh providing the entertainment.

05.01.2022 Another one out the door! I recently finished this full build for Scotts 79 series Land cruiser. I designed and installed a well rounded system for work and pleasure. Packed with REDARC Electronics and Roadvision products and powered by kickass batteries in our in house custom behind seat dual battery tray. The install included Roadvision h4 LED headlight globes.... Roadvision hb4 LED headlight globes. Roadvision 9 dominator extreme LED driving lights Roadvision surface mount LED work lights. Roadvision sidewinder LED work lights. Roadvision Surface mount LED number plate lights. Roadvision surface mount taillights. Custom in-house LED lighting in canopy and draw. REDARC 40 amp DC/DC charger. REDARC 2000w pure sine wave inverter. Kings 160w flexible solar panels. Custom in-house break out box. GME TX3350 super compact UHF. The breakout box includes 50A Anderson plugs, USB charger, cigarette socket, 12v voltage gauge, as well as switches for fridge, canopy lights, water pump and work lights. Its a great feeling to watch a truck go from a Stock trayback to a build of this level. Looking forward to sharing the next one with you.

05.01.2022 Recently had James 1971 charger in with a few electrical gremlins. Such a cool old classic was a pleasure to work on this one. Thanks James for trusting us with your pride and joy!

04.01.2022 Another cool classic we did some upgrades on recently was Matts buick. After a quick inspection we discovered that the alternator was charging at 19 volts at idle. The external regulator had failed. We rewired the charging circuit and retrofitted a new internally regulated alternator. Now shes back to a healthy 14.4 volts and ready for more Cruising.

04.01.2022 Getting ready for the weekend like.... Recently had Jons Land Rover defender in for a Roadvision lighting upgrade! Installing a massive Roadvision 50 inch DC2 series dual row light bar to the under side of his roof cage and set of Roadvision H4 LED globes as well.

04.01.2022 Big News! We are now officially a reseller for Teralume Industries driving lights and light bars in Newcastle, Lake Macquarie and port Stephens areas! We can’t wait till our first shipment of products comes in, So we can give them a run! If your in the market for some serious good driving lights, light bars and work lights. It’s hard to go past the Teralume products with awesome after sales service Australia wide!

02.01.2022 Another American classic last week was Glens c3 corvette. After recently bringing this across from the states Glen wanted us to give it a once over and get a few little things sorted with the factory wiring. Such a cool original car!

01.01.2022 Recently had Chriss truck in from Lake Macquarie Towing in with the lights on his head board not working a few lights out. After checking it out we found some bad joins and messy wiring. We got it all cleaned up and working and gave all the lighting circuits a once over. Glad we could help Chris and you back on the road!

01.01.2022 Just a little video of Gordons rx7. Nothing quite like the sound of a Bridgeport.