Wood Floor Drying in Bayswater, Victoria | Home improvement

Wood Floor Drying

Locality: Bayswater, Victoria

Phone: +61 1300 654 684

Address: 6/413 Dorset Road 3153 Bayswater, VIC, Australia

Website: http://www.woodfloordrying.com.au

Likes: 148

Add/Update information

Reviews

Tags

• Home improvement
• Damage restoration service

25.01.2022 It is important that flooring contractor test the substrates before installation of any flooring. Here is an article on understanding your moisture measure when looking at a hardwood floor. WDF suggest to get in a Specialist to help in assessing a flooring defect. ... Give us a call on 1300 677 823 https://www.woodfloorbusiness.com//sponsored-blog-how-to-m

22.01.2022 If you have pets or considering to have pets there are some things that you may need to consider. Here a article related to this matter by floor coverings https://www.floorcoveringweekly.com//flooring-for-fourlegg

19.01.2022 Important note to wood floor installation let it be hardwood or engineer floors. The slab must be dry and tested. Your contractor must show a moisture test map so you aware the substrate is dry before installation. Call us at Wood Floor Drying for concerns 1300677823 or email [email protected]... Here an article what happens when you have a untested substrate: https://www.woodfloorbusiness.com//slab-moisture-heat-crea

19.01.2022 Result in 24 hours into it and the slab is not suited for a direct stick - slab is reading from the in-situ test was above 95%. If you have question with slab give us a call 1300 677 823

17.01.2022 Sometime a little tender love care to your old floor is all it needs. Here and article on a white pine restoration https://www.woodfloorbusiness.com//wood-floor-rescue-whali

15.01.2022 Great info from the Australian Timber Flooring Association with COVID-19 https://www.atfa.com.au/

11.01.2022 Is your slab dry? https://www.woodfloorbusiness.com//mitigate-moisture-reduc

10.01.2022 Is your wood floor having issue that you suspect it due to moisture in a slab? Here is a video to show how we test slabs moisture. Call 1300 677 823 we can answer your questions

07.01.2022 Let talk about ASTM test standard for concrete substrates. These test are important and all Floor should be tested before any direct stick floor are applied. Today we look at the ASTM1869 - calcium chloride testing is really used in australia https://www.f1869.org/

06.01.2022 Sometime you just need to change the floor and joist but when you do so make sure the subfloor is not forgotten. We added some subfloor fan and have a moisture data logger in the subfloor to stop issue...!! This design is to be alerted with an instant issue arise and stop further damage by drying the subfloor. If you have a troubled floor contact us on 1300677823

04.01.2022 Here an article from ATFA Australian Timber Flooring Association on Volatile Organic Compounds on wood floors https://www.atfa.com.au///17_Compliance-Guide-for-VOC.pdf

04.01.2022 Water in material not correctly measure can create insure to your wood floor installation. Here a case study: https://www.woodfloorbusiness.com//mysterious-moisture-thi

03.01.2022 Wood floor contractor! Slab moisture test is important- sometime non penetrating testing is not sufficient. In this job the non-penetrative reading was recorded after we pulled this floor up. The reading was around 5-4.5% contractor believe it ok to lay direct stick. We tested the floor by drilling hole following the ASTMF2170 standard. The test results show the below grade slab was reading around 95% which is not suited for a direct stick floor. Site preparation included the... investigation of the exterior building where rooms of flooring being laid and internal test on the flooring. This will reduce issue to your floor job in the future. Call 1300 677 823 if you have query

03.01.2022 At Wood Floor Drying we are committed to being involved in the standards organisation. The ASTM D78612 purpose is to provide wood products manufacturing,distributor, and retailer with a system to provide a clean objective information to communicate to customer regarding product conformance to different wood fibre tracing system within specific forest management a or forest certification program. Here is the web page the ASTM D78612 committee have developed... I encourage you to have a look. Great work ASTM D7 team https://responsiblesource.com/