Fireshield Render | Company
Fireshield Render
Reviews
to load big map
23.01.2022 Fireshield render has been tested toAS 1530.4-19997Sections 2&3 for a non load bearing panel.The FIRESHIELD RENDERED(INSULCRETE)panel was subjected to a rigourous 2hrs fire test with temps reaching 1100 degrees,after passing this test it was decided to continue and a further 2hrs was achieved( temps 1200 degrees) before ending the test. Which makes it one of the highest F R L's ever tested in an actual BUSHFIRE FLAME test(- /240/180)
11.01.2022 In a bushfire event about 10 per cent of the houses are in the flame zone directly affected by fire. While safe evacuation is the cornerstone of any bushfire plan, it is vital to ensure that houses that end up in the direct path of a fire are as resistant as possible. With our product, you have a much greater chance of your house surviving in the event of a bush fire.
09.01.2022 Not only retro fitting your old weatherboard home with Fireshield Render do you protect your home from bushfire, it can save you up to 70% on your heating and cooling bill!
07.01.2022 Bushfire protection without the compromise of executive style
03.01.2022 The majority of houses destroyed in bush fires actually survive the passage of the fire front, only to burn down during the next few hours due to the fire spreading from ignitions caused by windborne burning debris. Whilst direct flame contact and radiant heat also play a part in the ignition and destruction of buildings, these mechanisms are generally only significant during the few minutes it takes for the fire front to pass. Showers of burning debris, on the other hand, may attack a building for some time before the fire front arrives, during the passage of the fire front and for several hours after the fire front has passed. This long duration of attack, to a large extent, explains why burning debris is a major cause of ignition of buildings.
