Ynet Technologies in Camp Mountain, Queensland | Engineering service

Ynet Technologies

Locality: Camp Mountain, Queensland

Phone: +61 409 731 321

Address: 16 Mary Orr Court 4520 Camp Mountain, QLD, Australia

Website: http://www.ynet.com.au

Likes: 99

Add/Update information

Reviews

Tags

• Local service
• Engineering service

25.01.2022 Friday Afternoon and getting to the business end of a new 3D Printer Build. Run these last few wires and I can "fire this puppy up".

25.01.2022 For Sale: $500 SOLD FLASHFORGE Adventurer 3 Desktop FDM 3D Printer This fantastic little printer has been refurbished and works like new. The camera works perfectly, as does the wireless connectivity. You can monitor you prints from local network as well as create an account (free) and view from anywhere.... It has been completely cleaned up and serviced. New Print Head (hotend and nozzle) with receipts for warranty. Spare bead plate surface. 3D Printed Spool Holder to use 1kg filament rolls. Firmware is updated to the latest. Comes with sample roll from manufacturer (only a small amount of filament) 1 roll of ABS 1kg 1 roll of PLA 1kg I will offer for free training and software setup on purchase. Just bring along a laptop and allow an hour or 2 and I will have you setup and ready to print. The printer is second hand (one owner only) and has a few scratches but very minor and looks very good.

22.01.2022 Something different... https://www.youtube.com/watch?v=IUp3oCGZOzk

18.01.2022 Creality Ender 3 3D Printer Upgraded and With BLTouch FOR SALE: $500 SOLD This fantastic little printer has been refurbished and works like new. With the upgrades it is 100 times better than it was standard.... Upgrades: BLTouch Auto Bed leveling Anti-backlash Leadscrew Nut BMGStyle Dual Drive Extruder E3D Hotend and Nozzle E3D Hotend Thermistor Latest Marlin 2.0.6 Firmware Comes with 1 Sample roll of PLA I will offer for free training and software setup on purchase. Just bring along a laptop and allow an hour or 2 and I will have you setup and ready to print. The printer does not have the issues these printers com with new. The extruder is a proper Direct drive, which gives the print a far better finish. The BLTouch and leveling system means there is less chance of issues with the first layer adhesion... plus no need to continuesly adjust the level the original system had. The E3D Hotend System is by far the best available. it is also "full metal" so you can print any material upto 300degC. The newest Marlin Firmware gives you not only a safer system with full over Temp Protection the Original systems don't have. The Printer runs smoother and prints in higher quality than it did previously. The printer is second hand (one owner only) and has a few scratches but very minor and looks very good. The Heated Bed plate is used but works well despite the marks. It has also a flexable removable bed plate as well and again has marks but works well. Specifications: Model: Ender-3 Frame Material: Aluminum Profile Printing Size: 235*220*250mm (STD Printer 220x220x250) Printing Speed: 30-60mm/s Precision0.1mm Layer Thickness: 0.1-0.4mm Nozzle Diameter: 0.4mm Heatbed Temperature: 100 Working Mode: Online or Offline Filament: PLA,PETG,ABS,Wood,TPU,Carbon fiber,etc Filament Diameter: 1.75mm

18.01.2022 What do you do with a 3D Printer that uses Chipped Proprietary Filament and has to be always tethered to a PC with the supplied software? Pull it apart and put in a Ramps Motherboard and LCD... now lets see how much better this will be when it's done!

16.01.2022 5x Wilson II's all in a row.

16.01.2022 Another large 300x300mm 3D Printer finished... well almost... as a test it is printing it's own LCD Screen fascia panel. Tomorrow it will be delivered and start a new life 3D Printing STEM Teaching parts.

16.01.2022 3x Wilson II's ready for delivery. All 3 have the latest 32bit Re-Arm motherboards and are ready to take on the world!

14.01.2022 2020 starts with a BIG job! Worked the last week on re-configuring a commercial 500x500x800 FDM 3D Printer. Checkout this 550mm high rocket. Took 11 hours to print and used 300grams of filament.

08.01.2022 New to 3D Printing and not inspired... check this out! https://www.youtube.com/watch?v=JWX1HBB_fjA&t=28s

07.01.2022 Working on one of the smallest 3D Printers around. It's an old MakerBot CupCake CNC I was given maybe 5 years ago. The Cupcake CNC where one of the very early 3D Printer you could buy as a kit starting life in 2009. Tynan decided he would like to have his own printer. So we gutted it and built it up with parts I had laying around. It's a whopping 110 x 90 x 75mm print volume but with modern drivers, a E3D Titan extruder and a heated bed it's a little gem.

07.01.2022 Turning a cheap CR10 into a decent 3D Printer. First prints seems to prove it's a success... I am sure the customer is going to be more than impressed with the upgrade.

07.01.2022 FOR SALE $425 SOLD Wanhao Duplicator i3 Mini 3D Printer Upgraded This little printer has had a total work over making a small but still functional 3D printer for someone wanting a small sized and fairly quiet 3D Printer.... Upgrades: E3D Titan Extruder E3D Hotend and Nozzle E3D Hotend Thermistor Part Cooler Heated Bed Plate with Borosilicate Glass Sheet 15amp PSU Latest Marlin 2.0.6.1 Firmware Increased the Printing Area from 120 x 135 x 100mm to a respectable 125 x 215 x 115mm I have removed the original 24v 2.2 amp Power supply and replaced it with a 24v 15 amp 360watt more than capable of running the heated bed. The heated bed Upgrade makes this far more flexible system and will allow any Filaments to be printed. The print surface is Borosilicate Glass Plate not cheap mirror or window glass, This will handle the constant heating and cooling required without the risk of shattering. The E3D Hotend System is by far the best available. it is also "full metal" so you can print any material upto 300degC. Improved Cooling plus a removable Part Cooling fan. The newest Marlin Firmware gives you not only a safer system with full over Temp Protection the Original systems don't have. The Printer runs smoother and prints in higher quality than it did previously. The printer is second hand (one owner only) and has a few scratches but very minor and looks very good. Comes with 1 Sample roll of PLA I will offer for free training and software setup on purchase. Just bring along a laptop and allow an hour or 2 and I will have you setup and ready to print. Specifications: Wanhao Duplicator i3 Mini 3D printer: Extruder: E3D Titan Single-Extruder Filament Size: 1.75mm Layer Thickness: 100 micron- 400 micron Max Printable Area: 125 x 215 x 115mm (Was 120 x 135 x 100mm) Print Bed: Heated Bed Plate and Borosilicate Glass Sheet File Transfer: SD Card, USB Frame: Steel Frame (Powder Coated Black) Filament: PLA,PETG,ABS,Wood,TPU,Carbon fiber,etc Machine Dimensions: 385 x 435 x 330mm

02.01.2022 Go BIG or Go HOME! Fixing a large Commercial 3D Printer with 500x500x700mm print area.