Australia Free Web Directory

HiBoost Automotive | Oil lubrication & filter service



Click/Tap
to load big map

HiBoost Automotive

Phone: +61 431 028 091



Reviews

Add review

Click/Tap
to load big map

24.01.2022 Have had a busy few months haven't posted anything for a while so here's a few things we been up to 65 Mustang engine build, after having a few set backs with his build Gavin ask us to take a look over the engine for him, diagnosis wasn't the best so a full rebuild was in order. The engine received a 20thou bore and hone Hypatech pistons full engine balance Clevite bearing AFR 165 heads and a mild Comp cam with 1.6 ratio roller rocker Melling's oil pump and ARP bolts and st...uds throughout. Engine is topped with a Edlebrock air gap manifold and MSD Atomic EFI.



23.01.2022 Gavin brought his mustang back in after the engine rebuild to have a better sounding and better fitting exhaust fitted. We used pacemker headers modified to suit and a custom made exhaust by Ozzie weld and Fabrication Luke did a fantastic job of the exhaust and it now sounds the part as well as fitting correctly.

22.01.2022 HiBoost automotive is please to announce a New apprentice starting in August

21.01.2022 Jame’s supercharged XR8 came in not running after an unfortunate engine failure, due to a sheared off cam bolt. We removed the engine and stripped it down to assess the damage found the R/H head to have bent intake and exhaust valves as well as broken rockers. We sent the heads away to be serviced and repaired reassembled with genuine and performance aftermarket parts. After checking over the car found the rear cradle was also broken so we fitted a IMS twin diff bush kit. Needless to say James was happy to have the car back on the road again



17.01.2022 Giving my own car some love for a change

16.01.2022 Jake brought his beautiful Breeze Green BF XR6 turbo in for a suspension handling and look up grade while it was here we also added a cat back exhaust. Suspension upgrades were Kings superlow springs front and rear... Koni red shocks all round New superpro bushes in the front lower control arms Exhaust was a twin 2 1/2 inch Venom cat back to give a nice deep idle and throaty note when on the load pedal.

16.01.2022 Matt’s single turbo XR8 manual came in for IMS twin bush diff hat upgrade while we had the back end out tidy up few other issues added super pro control blade bushes as well as replacing the rose joints, rear end definitely felt much more connected to the road afterwards. Unfortunately the day after Matt picked the car up the input shaft sheared in half so we went and picked the car up sent the box away to get the input shaft replaced with a hardened 26 spline item. We also replaced the clutch discs and replaced the slave. Back together again now ready for Matt to enjoy it



15.01.2022 Congratulations to Alicia and Jake on wining best in show for their cars

15.01.2022 Customer had an unfortunate wet weather disagreement with a gutter in his R33 GTST skyline, unfortunately the gutter won and did so substantial damage to the left front of the vehicle. We replaced all the bent suspension parts with Hardrace solid bush full adjustable suspension arms whiteline sway bar and braided brake lines. With the new suspension car feels totally different to drive corners like its on rails and with little to no difference in ride even with the solid bushes.

14.01.2022 We a down at the all ford day come say hello

14.01.2022 All set for the all ford day thanks Steve and Emily @vantageprinting for quality and service for the windscreen banners and promotional flyers

11.01.2022 Hi all having problems replying to messages on fb at the moment bear with me while I try and get this sorted I am receiving just won’t let me reply



09.01.2022 Jordan’s beautiful G6E turbo came in for valve spring upgrade, but once we pulled the rocker cover off we found 2 of the inlet cam lobes were badly damaged so the cams had to be replaced. After some discussions with Jordan while we had the engine in pieces he opted to carry out some more upgrades, so along with the atomic valve springs we added atomic head studs with overs sized washers, atomic timing chain kit, atomic oil pump gear kit and a venom 4 inch dump pipe and hiflow cat. Carried out a minor road tune to stop the engine light coming on and ensure it wouldn’t over boost. Once Jordan has upgraded the fuel pump, reg and injectors and gets a full tune he will have a nice street sleeper on his hands

02.01.2022 RX8 (yes we do Rotary's too) in for an engine swap after the eccentric shaft broke. quick engine swap cold air intake and cat back exhaust and she was back on the road again

01.01.2022 Come down and say hello we are at the all ford day at eastern creek

Related searches