Bevel Rubber in Ferntree Gully, Victoria | aircraft & boat

Bevel Rubber

Locality: Ferntree Gully, Victoria

Phone: +61 3 9758 0476

Address: P.O.Box 87 3156 Ferntree Gully, VIC, Australia

Website: http://www.bevelrubber.com.au/cart

Likes: 2430

Add/Update information

Reviews

Tags

• Business service
• Automotive, aircraft & boat
• Automotive
• aircraft & boat

25.01.2022 1 set left until I get more stock. https://bevelrubber.com.au/cart/index.php

24.01.2022 DIY inertia dyno & engine test bench is coming along. Using a truck brake via load cell as an alternate braking load.

23.01.2022 Just letting everyone know that Bevel Rubber is still currently open and shipping orders around the globe. We are fairly self sufficient here as we manufacture parts and components in-house and can continue to do so for as long as materials and consumables are available. Stay safe everyone.

22.01.2022 Aftermarket selector springs that are the wrong gauge. The gap that the springs sit in is 8.5mm wide. The original springs (pictured right) are 2.8mm. The aftermarket ones (pictured left) are 3.2mm. When in position they are 3 coils wide.

18.01.2022 Noice! - and what’s even noicer is the helpful guys at Maxton. :-)

16.01.2022 Soon to be available.

16.01.2022 Coronavirus Isolation quiz question time: M7x1mm is not a common thread. On a standard issue Ducati 1975 900 SS, how many instances is there of an M7x1mm thread?Coronavirus Isolation quiz question time: M7x1mm is not a common thread. On a standard issue Ducati 1975 900 SS, how many instances is there of an M7x1mm thread?

15.01.2022 Not my work but soon to be available, LED’s inside.

15.01.2022 Left - Malossi Nickel Plated alloy type slide 58g. Right - Mikuni chrome plated brass slide 317g. Honestly I nearly fell over when I felt the weight of the Mikuni slide on it’s own, almost half the weight of the whole carby body.

15.01.2022 Port drilling done. More time taken setting up tooling than actually drilling the holes.

13.01.2022 Been needing to make these for a long time now.

13.01.2022 Todays molding jobs - Topping up stocks of the Singles Jelly Mould tank caps, made from phenolic resin (Bakelite).

11.01.2022 Finally finished another batch of rear shock shrouds - polished & black, for collets and without.

11.01.2022 Always busy making something.

10.01.2022 GT40 kit car. Wouldn’t that be a fun project.

09.01.2022 Hopefully will get some time soon to get back onto these, birch P5 motors. Approved by MA for racing in period 5. Just time & money!

09.01.2022 Maybe time to finish these off? Been sitting on the shelf for last 10 years.

09.01.2022 One thing have always wanted to build - an engine dyno.

09.01.2022 Complete switch with bakelite key.

08.01.2022 Lovely brembo disc. 13 kgs unsprung weight! :-)

08.01.2022 It’s probably obvious but any guesses?

08.01.2022 Missing doing this job.

06.01.2022 At least Bevel Ducatis have the crank going in the right direction. https://www.motorsportmagazine.com//why-motogp-going-backw

06.01.2022 Mystery Wednesday - any guesses? It’s found on certain bevel twins from the factory. Ok enough people have answered correctly now. It is the epoxy filler Ducati put in the RH side of the die cast 750 cases near the oil plug. Obvoiusly they had a porosity problem and so did all of them regardless. This one I noticed was loose so pulled it out complete with a self tapping screw and a slide hammer.

04.01.2022 Saturday morning - toast, coffee and sand casting patterns.

03.01.2022 The good thing about isolation is getting some of these little jobs squared away.

02.01.2022 I just really like this picture.

01.01.2022 Working on a bitsa GT. I guess I will just leave the frame number like this?