Hendry's Performance Engines in Mackay, Queensland | Automotive repair centre

Hendry's Performance Engines

Locality: Mackay, Queensland

Phone: +61 438 376 899

Address: 8-10 Cowleys road racecourse 4740 Mackay, QLD, Australia

Website:

Likes: 3132

Add/Update information

Reviews

Tags

• Engineering service
• Automotive repair centre
• Vehicle customisation shop

25.01.2022 Well Steve’s 408 stroker is all done finished and gone back to Bundaberg we were a bit slack getting the last updates done. But this covers the whole build. It’s left nice and safe for now until Steve is back and we complete the final tune and possible intake and throttle body upgrade. Will post the final tune videos when we get her back again.

24.01.2022 As a few of you are aware over the last 12 months or so we have been doing a heap of R&D on the new Hemi Engines. Mostly on Teesh’s Jeep but Frank recently hit us up for a Harrop Package on his Ram 1500 with the 5.7ltr Hemi. Which allowed us to play a lot more on the tuning side of these things etc than we have previously. We fitted up a Harrop 2650 Supercharger Kit and Harrop Full Exhaust System Extactors and Twin 3 System and the results were awesome. With 226hp standard a...nd 457NM of Torque we ended up with 333HP and 679NM of torque on 6 pound boost. It’s made a big truck a hell of a lot faster and a monster to tow with now. A massive thanks to Frank for trusting us with your pride and joy. A big thanks to Harrop as always and a huge thank you to Jason at VCM who went above and beyond with helping out with ECU unlocking being a new 2020 we ended up having to send back to America for unlocking and Jason watched and tracked it the whole way to speed it up anyway he could for us and most of all a big thanks to Jesse in the workshop putting in the hard yards with the fitting of this set up mate. Another happy customer and another project done before Xmas. See more

23.01.2022 A little video from our gender reveal on the weekend another bonus of being a small buisness and having each and everyone of our customers become our extended family aswell. We love each and everyone of you we look after you all as much as we can and can’t thank you all enough for the ongoing support. So glad we were able to share the day with as many as you as we could and that were available on the day. Kai has put one seriously good video together for us.

23.01.2022 This one was an absolute pleasure to work on. Adrian brought his awesome VZ Ute in for a flex fuel set up to be able to run on E85 and get our advice to fix a few intake temp issues. It started out a simple set up but this beast made some awesome power so we ended up running out of fuel everywhere the injectors ran out on E85 so in went 1000cc injectors. Then ran out of fuel pump a walbro intake 540 still couldnt keep up so we then had to build a complete fuel system with su...rge tank and twin walbro 540 pumps running off a hob switch boost activated for the second pump. Adrian had also suffered from some higher intake temps so we moved the battery in with fuel system in back and custom made him a bigger reservoir to mount in the original battery tray and changed all intercooler hosing over to dash 12 soft braid that looks killer in the engine bay. This ended up a complete animal seeing 700+ rear wheel horsepower on the new tune combo. Still on the stock 6ltr bottom end. See more

23.01.2022 We have all your performance work service work and general mechanical repairs all covered all in house. Contact us for your next upgrade or repair.

23.01.2022 We had a Holden Colorado in this week for a clutch change out and rear main seal replacement. Jesse nailed it on this one and pumped it out. Another quality job done. Contact us for all your mechanical repairs, servicing and performance work.

23.01.2022 Hey guys. Firstly my many apologies about the lack of content on the page recently. We have literally been completely over ran with work and been working around the clock so had very little time post updates. We had Noels immaculate VE HSV back for a camshaft change. Noel brought it back from Rockhampton after not being happy with the camshaft he had originally had fitted in Rocky. Last time we had the car we fitted a Harrop 2300 Supercharger and this time matched it with a Harrop camshaft. We had to stay small as its still running a standard Convertor. But gained another 60+HP on camshaft only so any wonder why he wasnt happy with the original cam kit. Cant thank you enough for trusting us to bring the car back again mate. And hope youve been enjoying the new combo.

22.01.2022 Happening all day today at Kinchant Dam for anyone interested

22.01.2022 Breaking up all these LS builds with another Holden Stroker Engine. Long live the old 5ltr I say hahaha.

21.01.2022 A massive thanks to Harrop Engineering for the help on this build. We received one of there first kits for the 5ltr and did some trial on Peters original engine before building a whole new engine combo and camshaft profile a lot more suited to the top mount blower. Harrop helped us the whole way with custom fab of extra pulleys to find the extra boost we were chasing and a few little teething issues along the way. Still a lot more to come from this combo with a possible convertor change in the turbo 400 an air intake to be fabricated and then connect the water meth the offset some intake temps and squeeze in some more timing. So stay tuned for more to come from this combo yet. Thanks again to the whole Harrop Team.

21.01.2022 We recently had Damian bring in his very tidy VE SS for a camshaft package after it developed the all to common noisy lifter. We gave it the full treatment fitted Harrop OTR cam lifters oil pump timing chain kit. Dual valve springs the complete package. With Leppy then taking over for tuning and dyno duties. Only thing Damo needs now is the exhaust system to match and gain that little more horsepower. Thanks again mate for choosing us for your upgrade. Call in and see us for all your mechanical needs servicing repairs and performance requirements.

21.01.2022 We recently had Cody bring in his absolute immaculate HQ Monaro. We are always a sucker for these old girls. I have huge passion for these things especially restoring one myself that will someday be our shop show piece. Cody was having a heap of drivability and starting issues with the LS1 conversion and carby it had when he bought it. So we went through the carb and gave it a clean up and adjustment and found some hidden power he had been lacking aswell. Cant thank you enough for trusting me with your pride and joy mate. And look forward to helping you out on the next list of planned upgrades.

20.01.2022 Anyone who wants to see some top quality cars or show there kids or simply just wants to call in and see us for a chat. We have some of the toughest cars in town and from across the state tomorrow on show at our workshop some of our great customers and friends have offered there cars on display for the day for you all to see before this weekends racing. Been considering a performance upgrade on your vehicle or simply need a general service or repairs. Friday 18th is the day to call in and see us and have a look around. See the dyno and how we go about tuning. Our team will be on board to help with all your enquiries and show you around the fleet.

20.01.2022 We recently had Jason bring in his VF HSV LSA for our ever popular Harrop stage 2 upgrade package. We fitted the Harrop airbox and filter. Supercharger boost upgrade and lower temp thermostat. Leppy then got to work on the tune and hit the rollers on the dyno. Thanks again for the work Jason and hope youve had it out enjoying it. Contact us for all your performance work and general mechanical repairs.

20.01.2022 FOR SALE 2012 HSV GTS VE Series 3. Leticia Blizzard will hate me for this and Ill probably hate myself but with working 6 days a week and limited time the poor thing just isnt getting driven. Chad and Harlow are both getting older and we are looking at options that give us something to enjoy more as a family away from work on weekends aswell as wanting to get a few bills etc out of the way during these uncertain times at present. Its got our own custom ground cam and custom build exhaust system with pacemaker 2 4 into 1 HPC coated headers. Harrop OTR and can also be supplied with Harrop supercharger kit for the right price if wanted also. Contact us direct for pricing if genuinely interested or call in and see us at the shop.

20.01.2022 Another one of the Rockhampton cars making the trip up to Mackay to have some work carried out. This one making a couple of trips as there were a couple of fuel system issues we wanted to see tidied up a little on the first trip. Another nice LS and Harrop blower combo and a very tough looking car. We are now currently pricing up a RB30 engine build for another project for him also. Thanks for making the drive up mate. Was a pleasure meeting you guys and hope youve been enjoying the car.

20.01.2022 A little insight into the engine building side of what we do for yas.

20.01.2022 In these very difficult and uncertain times. We are currently very fortunate to be classed as an essential service. So Hendrys performance engines are still full steam ahead. So to help with the self isolation at present we are now offering all our customers and Mackay region a full pick up and delivery service of your vehicle free of charge for all your log book servicing and mechanical repairs. We are also offering free vehicle washing and cleanse of your interior to ensure all yours and your familys safety during this tough time. We are also happy to answer any questions and enquires via phone to help you all out at present and save you having to call in and allow you the time to self isolate at home with your familys. Again from Myself Teesh and Family we love and appreciate each and every one of you for your ongoing support.

19.01.2022 We recently had Carwyn bring his immaculate near on brand new VF SS in for a full Harrop package. We fitted full Harrop extractors and twin 3 exhaust system with high flow cats. Harrop OTR bundle and Harrop H04 camshaft and dual row valve springs to suit. We also removed gearbox and fitted a new dominator 3200 stall Convertor. Leppy then completed the custom tune and the smiles on Carwyn’s face when he picked it up were enough for us to know he was well and truly happy. The car is an animal now from original stock form on the street and completely set up for boost at a later date. So glad we could help you out mate and can’t thank you enough for trusting us with your pride and joy.

17.01.2022 Well we finally have Braydons F6 engine screaming into life. This build as most of you have been following has been happening over quite some time. But shes finally on the rollers and making numbers. Time for Braydon to start driving and enjoying it for a while. Then we will bolt her on the hub dyno and do the final run and final dyno tune to represent the final numbers without wheel spin etc. The turbo 400 with big convertor with no lock up cost us power figures for now bu...t will make it a lot more drivable on the street. Proving once again. We are not just known for our LS and Holden builds with some tough ford work now happening and a lot more coming soon. This build also has a lot of people to thank. As I cant get the most out of my engines without quality people by my side. Firstly a massive thanks to Braydon Wishart for trusting us to build his engine. Im sure we have both wanted to kill each other at times lol but its been our pleasure working with you mate. Peter at Full lock done the engine install and we climbed all over it and were very happy with the end install result. Dave CPV Tuning for another killer Ford tune. The guy definitely knows his Fords. Daniel Leppien massive thanks mate. For all your help and advice with your Haltech knowledge mate. You continue donating your time over and over again mate and cant thank you enough. Time for it to enjoy some street duties now before we share the hub dyno figures with you all. Contact us at Hendry Performance for all your performance work and mechanical repairs. See more

16.01.2022 To all our Marine customers. We are very lucky and privileged to have the boys from Nautique here today conducting demo runs and rides for anyone interested in a new boat in the future. This is the first time we have been able to have Nautique in town as we have previously only had the Tige and Malibu boys in town. These boats are absolute next level with Spratty having the new G23 and Sam and the boys towing up a new GS20. Its taking place at Kinchant Dam for most of the day so call out and drop in and see the boys. As per all our other major brands you can jump on board buying a new boat from the boys down south knowing you have confidence in after sales service through us here. Its well worth the drive out to see them.

15.01.2022 With all the unfortunate crisis we are all facing at present we are still up and running as normal and powering through the engine builds at present. Just finished this Holden 202 set to find its way into an EH Holden for Allan. This one got all the treatment. New crank and H Beam rods. Forged pistons. Brand new Yella Terra heads and roller rockers coupled up with electronic fuel injection and an M90 supercharger cant wait till Allan has this beast back in and we get it back for start up and tuning duties on the dyno. Will post some videos up when we hit the rollers.

15.01.2022 Hey Guys. We still have 2 complete LS1s to move. First is a VY Ute which has a cammed LS1 with Yella Terra roller rockers etc on it. Tailgate front bar and guard and extractors only things sold. Motor and gearbox still available. Also have a full set of AP Racing brakes calipers lines pads and slotted rotors. Complete kit. Second Vehicle is our shop burnout car. LS1 had cam LS7 lifters new oil pump dual row chain ARP head bolts new gaskets etc etc only before its last run. ...The holley high rise and twin throttle bodies etc is also still available. Its VX Calais still with full working electrics. Contact us for any of the parts above if your currently chasing engine etc for a conversion. Burnout car is still 100 percent complete if your looking for a car to get started in the scene with or would like to here running. Contact Luke or Teesh at Hendry Performance. See more

14.01.2022 We have definitely had some big hours that we have been putting in lately but its definitely been paying off. A few of our long term projects Ive really been able to find some time to focus on lately and its even got me excited to see them coming together. Mitchs mustang has been with us for quite a while and now its all coming together aswell as Claytons immaculate VE SS that we are building an LS3 416 stroker with Harrop 2650 for. Then Shanes bad arse mustang build i...s also finally taking shape with literally everything on that thing being custom built. We arent quite ready to show photos of Shanes yet due to the amount of custom work gone into it. But will be doing a big reveal in the next couple of months when we are finished on the engine dyno. In the mean time take a look at some of the work going into Mitchs 347 Windsor stroker with Weiand 174 pro street blower and Claytons 416 LS stroker with Harrop 2650. I cant thank all these boys for being so patient. Nothing has ever been a problem for any of them waiting months on end just for me to get time to make a little more progress. Thanks heaps boys for your patience. See more

14.01.2022 Been a week of services and general mechanical repairs again. VE SS back in for its first service and check over since we did the cam kit. Log book service on hilux and service and heap of little repairs on a Nissan patrol with a long list of other jobs still going for the week. Contact us for all your service work mechanical repairs and performance upgrades.

13.01.2022 We had Mayzey back up again recently to punch out a few more of our custom exhaust systems and the results as per always were bloody perfect its always a pleasure having such great mates with the same standard of professionalism and workmanship as ourselves. Land cruiser system. Jeep SRT. VT with LS1 and side mount blower. LS2 burnout car and a few other mods while he was here.

12.01.2022 Hey everyone just a little update to let all our customers know Luke will be away for the next 7 to 10 days. Hes been fighting some recent migraines and today found out its a little worse than he thought. Teesh and Corey will be on deck doing as much as they can and running shop as per normal but Luke is going to be out of action for a bit. Sorry for the inconvenience and we will do what we can without him where we can. Looks like the long hours and working around the clock has taken its toll a little.

12.01.2022 We recently had Martys very tough clean Hot Rod in with a 351 Cleveland for a carby rebuild compression test. Trans oil leaks and a full tune. This one was a pleasure to work on and very nice cruiser to drive. Thanks for trusting us with your pride and joy mate and enjoy cruising the roads in it mate.

12.01.2022 We have been doing a lot of R&D on the Hemi’s the last year or so. We would like to have the same reputation with the Hemi’s as we have with the LS stuff. The Jeep SRT and now the Rams aswell have really been our point of interest. Today we done a few tests on the new Ram 1500 for our friends at AAA Exhausts. They also been doing there research and now have there own in house fully built cat back system ready to go for Ram 5.7ltr Hemi. We did a stock dyno run on it and best ...we could get was 225RWHP @160kph as they are speed limited to 160 then we re ran it again with there Cat Back Exhaust System fitted. Same temperature same everything. No tricks tied down identical everything and it gained power and torque everywhere 225RWHP to 238RWHP and about 40NM of torque gains aswell. These things run so rich from standard as you’ll see in the dyno runs. I can only imagine how much extra we would gain with a tune aswell. We are also now doing the complete Harrop Supercharger Kits for these also and will have before and afters on those to share with you very shortly aswell. Get down and see Jason and Anne Maree to check out there new systems or book in for yours these Rams are fast becoming very popular. Or call in and see us for your tuning and performance upgrades on the whole hemi range weather it be the Rams or the Jeep’s etc. I love these things and having such a passion for a certain car is what makes you good at them. See more

11.01.2022 We recently had the pleasure of meeting Trevor and Michelle. Id have to say 2 of the nicest most genuine customers Ive met. Trev a chev fan and Michelle a rev head ford fan lol. We fitted a pacemaker cat back exhaust system to Trevs brand new Camaro and car back also on Michelles mustang. Leppy sorted tune on the Camaro and Dave from CPV tuning taking care of the mustang tune. Both cars so happy they have already booked in to have extractors and high flow cats fitted to both also. We have now also been listed and joined forces with Pacemaker Exhausts as one of there selected partner in performance dealers for all passenger SUV and 4WD king brown systems also. Contact us now for all your exhaust upgrades. Thanks for trusting us with your prides and joy Trev and Michelle.

11.01.2022 Blake recently brought his VE SS in for a few upgrades. The car was stock standard when it came in and we fitted camshaft lifters valve springs oil pump and timing chain kit. Harrop OTR full empire exhaust system and full set of XYZ Coilovers. The car has been completely transformed and Blake is loving the new combo. Leppy tackled the tune and Made great power from the LS2 also. Thanks for choose us mate enjoy the car and have fun. Contact us for all your performance mods and general mechanical repairs.

11.01.2022 Boys getting another step closer on Zarbys build. New brakes now all on and fitted. 1000RWHP means he needed some stopping power aswell now with full AP Racing 6pot HSV calipers all round on new rotors and pads. Fuel system nearly completed and new wheels are here to clear the brakes. New bell housing and twin plate NPC clutch going in this arvo also.

10.01.2022 Been a long time coming due to a lot of hold ups then a lot of waiting on me due to the huge amounts of engine builds we currently have. But Braydons F6 engine build is all done and back in and we are finally on the dyno ready to run the new engine in. After we finished the engine build. Braydon had the engine installed and ready to start at Full Lock Auto and credit to them. The install looks great and came back to us for start up and run in ready to go with nothing left to... do. We have finished the rest of our side and as of tonight ready to start building a good base run the engine in. Then we head to see Dave Sheehy at CPV Tuning the guru of Fords to run her up on the hub and take over tuning duties for the big run and see what itll make at the hubs. We may even put a little prize pack together for the closest guess to the final power figures on this one. This is Braydons pride and joy and cant thank him enough for trusting us to build his new 1000+hp engine. Looking forward to sharing this one with you all. See more

10.01.2022 Few people been asking us about our recent Dyno run on Peters VS Manta. We posted quite a few photos of the build and in the last week or so finally got it back in and ran up on the dyno. Peter gave me full control this time which meant throwing away his pistons I wasnt happy with aswell as the camshaft and had my own cam ground up to the numbers I came up with for the combo. The Harrop 2650 is working flawlessly and has proven itself better everywhere so far over the old Vo...rtech V7. Still a few things to do and more power to come but for about an hour on the dyno so far results are looking great. It needs an OTR fabricated for it to help with some air speed and velocity which means we can then hook up the water meth and combat some intake temps and looking at a change of stall convertor for the turbo 400 as the wheel speed is a little high in rev range catching up as the stall is a bit to high for the combo. See more

09.01.2022 I dont normally share a lot. Especially from other shops. But this right here I couldnt have said any better myself. We constantly get questioned about how Bob Ted Fred or my mate down the road can build it cheaper. This right here explains the exact same reason for us that all our engines make the power they do. Are as reliable as they are and sound the way the do run the way they do and they dont fail. Now all this and the poor bastards have only just brought the block back into the clean room. We currently have over 30 engine builds on the go and its all because of the work and hours I put into making sure there all perfect.

09.01.2022 We recently had Borgys super tough 300 in for a list of jobs. New radiator. Transmission and diff services. Re wrap all exhaust piping aswell as a few other bits and pieces for him. Borgy has been working on the tune playing around by himself and done a pretty stealth job to get it as good as he has so far. Super tough car I cant wait to see on our dyno some day for a run. Thanks for trusting us with your pride and joy mate and glad we were able to help you out.

09.01.2022 Hey guys just a quick message to let everyone know. We will closed today Friday the 29th of May as we are currently running one of our latest builds on the engine dyno up in Ayre. Sorry for the inconvenience.

09.01.2022 Another little shop walk around and update for you all. Everyone seems to being enjoying seeing what jobs we have on so I’ll try my best to keep you all up to date more regularly

08.01.2022 Another week and another couple of engines coming together back hard at it after being away sick for a couple of weeks.

08.01.2022 We are now really starting to get excited about the upcoming Rocky Nats. Now we are all locked in and so many of our customers are looking to enter or have entered we are getting pumped. To think we have built so many engines over the last 6 years in our mackay shop and this is only a handful of the ones entered without a single engine failure touch wood. Makes me super proud of the dedication I put into ensuring every single build is perfect the worst we have had has been Ji...m Walters torching a head gasket from fuel system failure. And now we are currently seeing on average 6 cars a month make the trip up from Rocky for us to do all there upgrades so it’ll be awesome to be able to come down and enjoy a beer and catch up with all our Rocky customers away from the workshop at what’s going to be a damn good few days. Here’s just a few of our customers entries. As I’m not sure who else is going at present. Without all our valued customers and great staff like Leticia and Jesse and Leppy on the laptop I’d seriously be lost. To the boys from Rocky I’m above great full that so many of you are all now making the trip north and that your all so happy with the work we produce up here. Can’t wait to see you all in April. See more

08.01.2022 A really nice 73 mustang Bob brought in for a tune. This one had a Cleveland 410 stroker that was originally built and tuned by another engine builder in Yeppoon and then recently re tuned by another shop in Mackay which since then the car had developed drivability issues and overheating issues ever since. So he brought it to us for a look. We gave it a full inspection and soon worked out the original build from Yeppoon was flawless and it simply needed to be tuned properly a...gain. With the MSD atomic injection we simply re set the whole set up and started back at basics with fuel pressure and re tune the car at all set points. Taking the time to ensure everything was perfect and using the dyno as a tuning tool to cross reference our set AFRs. Which ended up seeing the car and tune back to perfect again. And with customers taking the time to go out of there way and report there feedback to us makes all the hard work worth while. See more

07.01.2022 We have just had Mick in with his absolutely immaculate VY Clubsport. Mick and his Dad would have to be 2 of the nicest people we have met and being newish to Mackay when they got here they first found themselves getting there cars tuned at another shop having constant drivability issues since so bad that he was actually scared driving the car as a safety hazard with its stalling issues. After asking around they found themselves being recommended our way. I have a feeling the... original tuner knew his work was bad on this one locking the ecu to cover up a lot of faults not knowing we could unlock and still read the file. It would have to be one of the worst we have seen from there yet. Wide open throttle again was perfect but everything else was terrible. We all make mistakes and by no means like bagging another shop. But this car has all the fruit. LS1 with VCM 13 camshaft CNC heads Fast intake with 102mm throttle body and is absolutely immaculate yet the car had been turned into something he no longer enjoyed driving. We gave Mick our word we would fix it. He was quite hesitant at first as youd expect with how the car drove. So myself and Leppy took to the rollers and Leppy performed his magic yet again. The end result seeing a massive smile back on his face and another happy customer back on the road enjoying there pride and joy. Thanks for taking the time to find us mate and trusting us to fix your pride and joy. The pleasure was all ours on this one. Always worth it when your meeting new people like yourselves mate. Contact us for all your performance work and general mechanical repairs. See more

06.01.2022 We recently had Michaels VE SS in for a few repairs. Worried about the standard lifters and after having a couple of previous lifter noises we removed all lifters carried out a full DOD delete and fitted new LS7 lifters with all new parts and completed a Mafless tune with a Harrop OTR fitted while we were going. Was weird doing this combo without putting a camshaft in it while we were going lol.

06.01.2022 Toyota Prado in for 150,000klm service brake pad change and disc machining on front and rear plus timing belt replacement. Contact us for all your service needs and general mechanical repairs.

06.01.2022 Well finally finished another of the longer term projects. This one we originally put the blower on Peters original set up. I was overly keen to replace the bottom end believing the original camshaft was not suited for top mount blower and being it was 100 percent E85 I wanted to see more compression instead of having to compensate with boost. So after numbers ran a little low. Peter gave in and I got full open build options. Ive now ran compression at my specs with a custom... built set of pistons. We have a custom grind cam ground to numbers Ive come up with for the top mount. Dialled her in to perfection and if it doesnt make numbers now Ill have to kick my own butt lol. Cant thank Harrop enough for this one with originally receiving the very first 5ltr 2650 blower kit and working through a handful of original small hiccups I believe this time shes going to be a bloody good combo. Holden 355. Harrop 2650. Custom ground cam. 4 bolt mains. E85 with water meth injection. Looking forward to hitting the rollers. Thanks for your patience Peter. See more

06.01.2022 Another little update of a few of our current projects.

04.01.2022 A very tidy and well known local car that has been around for years in Mackay and Moranbah with an LS1 stroker and Harrop blower. This car came to us for a re tune from another shop. Credit where due the wide open throttle was quite good but idle and drivability was very poor with the car also having a major breaking down issue on boost that they were unable to resolve. We tracked the breaking down eventually to a faulty coil pack under load. Then Leppy built the car a complete new custom tune and hit the rollers. Car is only on very low boost but now back where it should be with the customer wrapped with the difference in drivability and performance. Thanks again for the work guys. Always great meeting new people and helping them with there pride and joy. Call in and see us for all your mechanical repairs and performance needs.

03.01.2022 We have been pumping out the log book servicing and general repairs again lately. Service work was a little slower starting the year than normal which gave us a chance to really catch up on some long term builds but we been pumping through the services again lately and some of them being some really tough cars we have had the pleasure of working on. So many people now trusting us with there late model muscle cars new car servicing and old school muscle car work. Thanks again to all our loyal long term and new customers for your valued support of our small family buisness.

03.01.2022 We currently just finished a Ford XR6 turbo build for Braydon. This was one seriously tough car previously but had an oil pump failure that destroyed the engine. We found so many faults inside the engine and really unsure how he hadnt had any failures previously. When it hits the streets again itll be sporting a new Haltech ecu and a few other upgrades. Braydon is currently fitting the engine back in and when we get it back for start up and dyno will be sure to post some videos. Thanks heaps for choosing us for your build mate. Your patience waiting so long for me being one man and hope you enjoy the new combo for a long time mate.

02.01.2022 With temperatures souring over 35 degrees yesterday it the shop. It wasn’t ideal for doing a dyno run on Boyd’s VF after just doing it’s first service after we rebuilt the engine. But even with heat soak and high intake temps giving us only 13 to 14 degrees timing and seeing just on 10 pound boost. We still almost nudged 600RWHP Hendry performance built LS3 full Harrop exhaust system. Harrop 2300 supercharger. Harrop H02 Camshaft on stock Convertor and standard 6L80 trans all tuned by Leppy in house at our workshop. Not to bad for ridiculous heat and humidity yesterday here in Mackay. For such a small cam and boost combo.

02.01.2022 Good luck to all our Hendrys Performance Engines customers and also our great friends and burnout family racing this weekend good luck stay safe and keep them straight guys.

01.01.2022 We recently had Boyd’s VF SS in. We fitted a supercharger kit to this one some time ago. It started to develop some un favourable noises which turned out being flex plate but we ended up removing engine and opting for a complete built bottom end while on the go. We left it still as a 6.2ltr on standard stroke. We just added compstar rods SRP pro piston kit and all the matching mods. Harrop H02 camshaft on standard Convertor still Harrop 2300 supercharger and fitted it all back up again. Running nice run in number on 8 pound boost. With first service coming up shortly we will make a belt and pulley change get the boost up and see what she can do. Will add some videos of final runs for you all to see.

01.01.2022 We have had a run of work from Rockhampton over the last couple of months as it seems there are more and more people down south looking for alternative options to carry out there performance upgrades. One of the recent ones was Noels absolutely immaculate VE HSV. Noel purchased himself a Harrop 2300 Supercharger kit and brought it up to Mackay for us to fit it and Leppy to take care of the tuning. We pre ran the car and before and after seen close to a 200hp increase at the wheel. Noel is now planning a trip back in the future for a camshaft change more suited to boost and probably a few other mods as we all know how the HP bug gets us all hahaha. Enjoy the car Noel was a pleasure to meet you and Thanks for trusting us with your pride and joy.

01.01.2022 Merry Christmas to all our wonderful customers who have continued to support us. I look back to 6 years ago when I was still working out west and building the occasional race engine from home to then have a small space sharing a workshop to what I’ve achieved now. And it’s entirely thanks to each and everyone of our valued customers. We haven’t come from money we aren’t rich and I’ve built what we have from the ground up. My beautiful fiancée continues to work for us and supp...ort me every single day completely for free working as many hours as me some days. 2020 has been a bloody hard and stressful one but we have still built some bad arse engines and unfortunately missed out on finishing a couple of ones we hoped to due to a hold up on parts from America. But none the less we have really kicked some goals this year. I feel like we are bettering ourselves every year and being able to help our customers more and more each and every year. So from the bottom of my heart I thank you all so much each and every one of you. From myself Teesh Chad and Harlow aswell as our little girl due to join the team in early March we wish you all a very merry Xmas and look forward to seeing and helping you all again in the new year. Just a few of this years builds attached for some reference. See more