Cncman | Business service

Cncman

Phone: 0438229936

Add/Update information

Reviews

Tags

• Business service

24.01.2022 This is what a lightning strike will do to a tv signal amplifier, I would have expected worse. It certainly stopped working..

24.01.2022 New optics and Discharge tube seals for this lucky 2.5 KW laser.

23.01.2022 Making cable harnesses

21.01.2022 I am the only person in Australia who carries the right spares and will repair the PCB on site and have it running again in a few hours. Good luck if you call the OEM. They offer an exchange for ~ $14k and wait for it to arrive..days...

18.01.2022 Here it is in slow mo.

15.01.2022 How do you get a trash conveyor that has been outside, rusting for 6 months moving again? It takes a while...

12.01.2022 I had a call about a laser power supply tripping . As I suspected it had a blown HV field effect transistor.

09.01.2022 3 Kw Fibre laser install, I wouldn't have believed a machine of this quality could come from China. Euro design and components, IPG laser source and very competent engineers to assemble and commission it. $ low 300s so hard to beat the value.

07.01.2022 Some people try to extend the maintenance period on their machine but it can be false economy when something breaks because it has run for twice the exchange period. This Vacuum pump siezed after something jammed up the rotor. See the gouges in the bottom of the pump in the picture. The customer couldn't get on quickly from the supplier but I had one ready to go on my shelf. Next day they were running and my price was less than half of what the supplier wanted.

06.01.2022 You have to have little fingers to do up these security screws on these connectors . Spindle drive reconditioned by Online Automation worked flawlessly

06.01.2022 A new steel canopy will make the CNCMAN mobile more productive.

04.01.2022 This laser cutting machine was poorly maintained leading to the failure of a servo motor. The suppliers of the machine had no spares so the only option was to get it re-wound by a specialist interstate. I had a similar motor on my shelf and was able to modify the software parameters to make it work. One more customer knows who to call when a miracle is required.