Litchfield Welding | Engineering service

Click/Tap
to load big map

Litchfield Welding

Phone: +61 407 726 202

Reviews

Tags

Click/Tap
to load big map

24.01.2022 Saturday morning job, all steel work tacked in place ready for me to weld out, it was a hot morning, no shade around.

23.01.2022 2 sets of fork lift extensions. 2.4 mts and 2 mts

22.01.2022 Days 2 and 3, clean up and prep for new skid plate, day 4, plate welded in, flat bars tacked in at 45 degrees, ready for welding, damaged skeleton cut out, more clean up before replacing them with new RHS.

19.01.2022 Custom casting plates

19.01.2022 2 ton x 6 mt x 2.5 mt flat bed trailer, floor plate on top with 20 mm rope rails each side.

18.01.2022 Another plant trailer, dose not look as bad as the other, but fabricating complete new bed and fitting hydraulics to the ramps, doing this one over the Christmas break as the owner needs to use it when he returns in the new year. not to many drinks for me over the next 10 days!!

16.01.2022 All terrain trolley for mig welder.

16.01.2022 Stand pipe to pump cement powder from bulk tanker into a hopper, fabricated in workshop and fitted to hopper at Shady Cramp.it swings around 90 Degs for transport.

15.01.2022 Plant Trailer, bit worst for wear, removed old floor and replaced with floor plate.

15.01.2022 Made up 4 portable dart boards with the help of some club members.

14.01.2022 Day one of a very long rebuild, l now remember why I didn’t make my shed to high, so I can’t fit stockcretes in it!

13.01.2022 Fabricated boat trailer, customer bought in his old rusted trailer, sent him home with a fully galvanised frame, used all the original running gear.

13.01.2022 Mounted 20 Kva gen set over side of concrete platform to high rise apartment block in Darwin city, Frame fully galvanised, gen set mounted on rubber mounts. Frame and gen set were lifted out over wall of bottom car park then lowered into place by low profile crane on top car park.all over in an hour.

11.01.2022 Gen set needed to be secured from vandals, fabricated frame in segments in workshop as each piece had to be walked in, RHS frame with mesh panels.

10.01.2022 Mount for shade sail upright, pivots so it can be lowered in high winds.

06.01.2022 200 ton "C" frame press, customer supplied 70 mm plate (green plates) and fitting own hydraulics, estimated weight 1200 kgs.

06.01.2022 Adjustable cradle for boning out beast, keeps them of the ground and helps the older generation>> not having to bend over as far!

02.01.2022 A busy 2 weeks, made some money and saved some money (didn't drink to much), Thanks to Total Excavations for choosing Litchfield Welding.

01.01.2022 Mounted up 8 x 55 inch TV's in outdoor area at Darwin Golf Club.

Litchfield Welding | Engineering service