LUBKE Engineering in Picola | Metal fabricator
LUBKE Engineering
Locality: Picola
Phone: +61 428 691 214
Address: 245 Kennedy Rd 3639 Picola, VIC, Australia
Website:
Likes: 396
Reviews
to load big map
25.01.2022 Its been a busy week with jobs. One on the list was fitting some large bearings to a housing for a screw press. #canolaharvest2020
25.01.2022 Before and after pics of replacing this excavator bucket floor and wear strips as well as replacing bushes, pins and seals on the tilt quick hitch
24.01.2022 Fabricated a new bucket elevator and modified the drive line a few weeks ago
24.01.2022 New locks on the 5 month old trailer
22.01.2022 So I built a 2 story machinery shed for (my son) Walkers bday.
21.01.2022 Other job ticked off the list today was this silage chopper. Wear strips, cracks and hoses are now like new. It came in for one job and ended up getting a few extra general maintenance jobs. Bring on #silage2020!
20.01.2022 Fabricated and erected this 36x16x5mtr shed
19.01.2022 A few repairs to a stick rake off a D6 bulldozer
19.01.2022 Another busy week at LUBKE ENGINEERING. #hayseason #crazyseason
18.01.2022 We modified and fitted a set of spring loaded tailgate locks to a horse float. Weve got 2 more locks in stock if your unhappy with yours.
18.01.2022 We lifted up a 32x12mtr shed last week. Now for the walls. Thank you Cummings boys
18.01.2022 This happened on flat top trailer!! No weld at all on the front of the pull where all the weight is.
17.01.2022 Fabricated these brackets for mounting the whipper snipper to the trailer
17.01.2022 Repairs to a John Deere mower deck
17.01.2022 It’s been a busy week with jobs. One on the list was fitting some large bearings to a housing for a screw press. #canolaharvest2020
16.01.2022 A bit of Ali work today repairing a leak in a boat
16.01.2022 Did some repairs to this tractor
15.01.2022 Fabricated hay forks for this Agrison loader with fold up uprights to cart either 2 if close to a roof line or 3 4x3 bales
14.01.2022 Last week we completed a pull for this air seeder cart and fabricated the frame for 2 liquid Fertiziler tanks mounted on the front
14.01.2022 Before and after pics of repairs this bucket
14.01.2022 Check out some of our machining, we did a 1.25 thread cutting today for some pins.
13.01.2022 Recently we fabricated some functional and powdercoated sign posts. Four movable and 18 stationary. Check them out in the pictures! #safetyfirst
12.01.2022 We Fabricated a cross auger on a tip trailer. This is to stop cleaning out product by hand
12.01.2022 Friday we completed replacing main pins, bushes and bosses, adjusted cutting edge, built up side skid plate mounts and replaced skids and did a heap of repairs on the ripper links and rippers on this 14 foot laser bucket.
12.01.2022 Fabricated new ramps for a 55 ton rated, hydraulic widening, quad axle trailer
12.01.2022 Some more repairs on a rubbish truck last week
11.01.2022 Removing some studs out of a casting on a tractor onsite
08.01.2022 Last week we pulled off and fitted up a new ring feeder. Also designed and fabricated rear light bars as well as supplied lights and rewired for that slick look.
08.01.2022 We fabricated this light mount. Something a bit different
08.01.2022 Fabricated a divider and fitted up a grain line double door for sowing time. Fertiziler in the back and grain in Front. Also painted the back
08.01.2022 Doing some repairs and replacing shaft after the bolt came out from the main pin and bent the back pivot and the pin
07.01.2022 Fabricated a 20ton excavator quick hitch for this sorting bucket.
06.01.2022 We replaced all the wear strips on this excavator bucket.
05.01.2022 Replacing a bent post on a shed
04.01.2022 Fabricated a cattle ramp in the workshop along with some posts, gates etc then concreting and onsite welding in process
04.01.2022 A decking frame we fabricated ready to be installed onsite
03.01.2022 Fabricated a liquid induction on an auger.
03.01.2022 Goodbye 2020 and a busy start to 2021 we’ve had a mixture of jobs coming though the workshop so far this year
02.01.2022 Weve been busy doing some pre sowing Maintance which includes welding up a few cracks on this bar ready for painting
02.01.2022 2 pot bellies 4 sale $500 each
01.01.2022 Last week was busy with replacing the floor, bent cross members and some modifications to this rubbish truck
Related searches
- Jason Dobes Welding
Local service Commercial and industrial Metal fabricator
47821173
8 Fourteenth Street 4806 Home Hill, QLD, Australia
280 likes
- Ballplaya Clothing
Clothes shop Commercial and industrial Manufacturer/supplier Clothing (brand) Apparel distributor
+61 423 727 377
5443 likes
- Kelba Australia Pty Ltd
Commercial and industrial Commercial and industrial equipment supplier
+61 2 9476 4544
7 Leonard Street 2077 Hornsby, NSW, Australia
57 likes
- Recircul8
Commercial and industrial Recycling centre
+61 438 899 588
1 Daryl Street Scoresby 3179 3179 Scoresby, VIC, Australia
28 likes